E30 Zone

this guy is actuly a tit. woww.......

There is a large rubber grommet behind/underneath the glove box, with wiring looms passing through it into the engine compartment. Check that this is in place properly, the condition of the metal surrounding it, and the condition of the two 6mm studs on the bulkhead that the glovebox hinge bolts to...

There is a large rubber grommet behind/underneath the glove box, with wiring looms passing through it into the engine compartment. Check that this is in place properly, the condition of the metal surrounding it, and the condition of the two 6mm studs on the bulkhead that the glovebox hinge bolts to...

jap is crap

Alright guys, quick question, is there any one on here that can comfirm BMW dealer service history? In his add it states its gone into BMW Williams Liverpool at 12 24 and 36k, i rang them however they could only confirm the 24 and 36. They gave me a 0906 BMW number but thats dead. Just want to confi...

o ok, the "is" i had had it infront of the sunroof. i think

i think the 318is has the same ariel as an m3 on the roof infront of the sunroof.

cheers guys, yeah hopefully keeping it if i get there in time. its all the way in cheshire

. will hopefully go down on sunday.

Alrite zoners. I may be going to see a 325ci sport on the weekend. Any one had and problems with these? any thing i should be looking out for? and what to check over. Its got low mileage and full history and prev MOT's. Any help appreciated. Thanks :) http://www.ebay.co.uk/itm/300712777534?ru=http%3...

Just saw this on pissheads. very

bbs rs003's

im 80% sure its downwards, but if not just turn the drum by hand and if its rubbing / too tigh, turn the adjuster the oppisite way.

i heard you cant grip them aswell as the leather ones, unless your wearing gloves

It will work, but i think that piece is for the steering lock.

Jim320i wrote:Why not just not log on?

lol

Europerformance do them. Although its worth gettin a used one. Would have bedded in nicely

Nope. Different diameters

Mint! Is that on original suspension? Looks low

No they wont mate. The struts are different.

hello guys, i tried searching for this but cannot find the answer. whilst driving my steering some times get stuck in one position. (dangerous? i no!!) it does not take force at all to move it but i have to kinda yank it. also towards the top of the shaft its squeeking. i just changed the steering r...

Cheers guys. the other problem was the steering rack, ive changed it for a second hand one but ran into a problem. the track rod end ball joint keeps spinning when i tighten the nut. iv'e tried jacking it but same problem. the old rack had alen key holes on the top but this ones got nothing. any ide...

hi guys, quick question if any 1 can help. my sport failed on two things for the MOT. just wanted someone to show me a pic of the following. "front suspension component mounting prescribed area is corroded" is this the droplink? if anyone can show me a pic of this. or is the "front anti roll bar lin...

lol ok cheers, does yours only happen randomly aswel? and gets louder with revs?

hi zoners. As i go up in the revs in mostly 1st and 2nd gear, theres a "wooooohing" noise comming i THINK from the propshaft, people sitting in the back cannot hear it and its not from the engine. it gets louder as the revs go up and it doesnt happen all the time, just randomly. i changed thee diff ...

It could even be comming from the sunroof seal it self if the bench is wet. Id check this first

didnt think of that actuly! used a coat hanger instead

thanks alot guys. done it!!

had a look at the connector and found the bottom half is indeed corroded. so i am in the middle of soldering and the top connector has 1 more wire going into it than the bottom 1? what do i do with this?

Thanks alot guys. Got it. So i just cut the connector out and solder the wires together?

ok, so its not the 2 pin connector on towards the bottom of that pic? what type of connector isit?

more problems! i found that the drain tube on the front nearside sunroof is blocked and waters leaking in the footwell BUT the problem i have is that the sunroof only opens up and down and doesn't slide back and forth so i cant get to the front tube to clean it. does any one have any ideas how to ge...

sorry its a 325i. im not lookin for the the blue temp sensor, iv'e seen other threads and it states theres a connector under the mani that corrodes away and is best hardwired together

hi guys, iv'e been reading some threads about the connector under the manifold for the injectors to sort out the cold start missfiring and high idle. so i took out the air box and i didnt see any connector apart from a two pin one thats connected to nothing!! is this the connector or am i looking in...

Search found 127 matches

Re: police

Re: Leeeave it...

Re: floor pan

Re: floor pan

Re: E30 325i - SUNNY!

Re: Buying an e46 325ci sport

Re:

Re:

Re: Buying an e46 325ci sport

Buying an e46 325ci sport. Genuwine mileage?

Re:

Re: Additional wheels, can't decide. ?

Re: Adjusting handbrake, which way to turn barrel?

Re: sunny day and BBS RS

Re: alcantara steering wheel

Re: 370mm wheel broken fitting.

Re: how to???

Re: Best place to buy a Stainless Exhaust System?

Re: BMW E30 M3 S14 ORIGINAL CENTRE SILENCER EXHAUST

Re:

Re: Are 4 Cyl m3 springs any different from 6 Cyl 325

steering keeps locking

Re: MOT fail

MOT fail

Re: prop shaft problems. i think

prop shaft problems. i think

Re: Rear Seat Bench and rear passenger side footwell WET!!!!

Re: how to clean sunroof drain tubes. sunroof stuck

Re: how to clean sunroof drain tubes. sunroof stuck

Re: idle problems, connector under manifold.

Re: idle problems, connector under manifold.

Re: idle problems, connector under manifold.

how to clean sunroof drain tubes. sunroof stuck

Re: idle problems, connector under manifold.

idle problems, connector under manifold.