E30 Zone

Sweet

Great guy came down without fail. Thanks.

Hi, need some parts for my iS.

2 front wishbones L/R
2 top mounts L/R

I believe my iS if fitted with the 51mm strut. Not sure if this makes a differance.

Regards

Rips

Cheers fella thats helped alot, Me and my brother(pal318is) also thought it could be that.

I'll replace the whole lot.

Regards

Rips

Hello all, Got this problem with my iS, im getting this vibrating noise from under the car. Seems to be coming from the centre, back or near the front kinda. And it vibrates when im driving over say 40/50mph. Got told it could be the propshaft bearing or the donut which goes around the bearing, not ...

Need a price on this please?

Rips

town325i, i had an idea that it would be there. Many thanks for confirming it.

Now to crack on with the installation.

Regards

Rips

Hi all,

I need to know the location of the ignition switch. I'm installing a engine start button and need to run a wire to the ignition switch.

Any help on the location of this wire would be great.

Many thanks and good morning all.

Regards

Rips

Hi just wanted to know if the above is available, if so what sort of price am i looking at?

regards

rips

Oh man, was really looking forward to this meet.

Please keep us updated if you find another site.

Rips

Gibson wrote:i need the same answer!
mine lies to me. and it keeps getting stuck on 19miles....

Thats the same problem as me too. Don't have a clu what to do.

rips

tim_s wrote:remember that m20 flywheel will not work with m42 starter dude.

Which starter will i need fella?

rips

Guy's im finding it hard to adjust the range on the OBC. Is this a problem with the unit or something else?

Rips

Iv tried to adjust the range but to no effect it just keeps on turning....Any ideas??

rips

Just spoken to Iain, I'll be calling BMW in the morning. Intention - if they play ball - a) Up to 40 cars, to use their carpark for a couple of hours for photos. b) Press coverage with Total BMW - again if Total will take it. c) Head on to a nearby pub... any suggestions for the pub much appreciate...

Using my box from my iS and a m20 fly wheel, could i still use my propshaft from the iS too? If i can thats a result all i would need to do or get would be a moded manifold. Can i buy these or does anyone know of someone selling one?

Rips

What type of screw or screw driver is need to adjust the level of fuel.

I'v been so confused with this too and i fitted ny OBC over a year ago.

Rips

as advised, plenty of info in the M50 Developments thread, also check out www.e3024V.com plenty of enterprising indioviduals on there with first hand experience of this swap to help you out. I'm about to do it myself too, but I was lucky to obtain an M50 from a 525 which already had an E30 318is bo...

as advised, plenty of info in the M50 Developments thread, also check out www.e3024V.com plenty of enterprising indioviduals on there with first hand experience of this swap to help you out. I'm about to do it myself too, but I was lucky to obtain an M50 from a 525 which already had an E30 318is bo...

Cheers fella, sorry but i dont have an lsd, but can get them. which gear box/dif would you recommend for this swop?

rips

Thats not an m30 engine fella it will probably be an m50 as Ziggy says Your gonna need to think about how to mount it usually E28 535/m5 rubber engine mounts and the gearbox (dpending on which box you choose to use). Fortunatly your donor ill have the correct sump to clear the crossmember and the r...

Ziggy thanks for that. M50, thanks for that info too.

Rips

Hi peeps,

I can get a 525i 24v engine from a e34. Now, what i need to know is what other parts are needed to carry out this conversion in my e30 iS. I can get the engine, gearbox, ecu, loom, manifold etc ect. But what other parts are needed to do the full conversion.

Regards

Rips

cuzz1510 wrote:you will need e36 evo front control arms otherwise your front wheel wont sit in the middle of the arch.it will sit to the back of it and looks poo

Whats the differance from the m3 evo one's to the e36 one's.???

rips

Ok, do you have all the parts needed, i.e front struts/hubs/calipers, etc etc.

Is this all a straight forward fitment also?

Rips

Hi guys just wanted to know what e36 parts are needed for the 5 stud lug conversion.

Any info/help would be great.

Regards

Rips

What parts are needed from the e36 for this conversion?......

Any help would be great.

Regards

Rips.

to asses for air leak ( inlet, plenumn or bellows ) run the car to warm idle, and remove the oil filler cap, if the inlet side is airtight the car should hunt and run poorly whilst the cap is off. should there be no change, then you have a leak somewhere, spray carb cleaner in the area and listen f...

My bro had this problem, he replaced both front arms. No more knocking.

Rips

When you say air leak, could that mean the air filter too.

I'v recently changed my air filter to a BMC induction kit.

Hi guys, my cars struggling to start in the mornings and when its does it starts to idle up and down...like its caughing or something.

Anyone got any ideas as to what it could be.??

Car was serviced about 3/4 months back.

Regards

Rips

Happy new year to all.

All the best for 2008 everyone.

Rips

Top Fella, sold, bought parts from Spadge. All in top nick.

All in all top geezer.

That white sport you got, thinking of selling it fella.

Rips

If my screen is not bonded will the m3 screen still fit? if so how?

if it fits. i might be able to siurce one from work.

result

Hi guys need some info, will a e30 m3 front screen fit my iS?

Any info would be nice.

Regards

Rips

Search found 78 matches

Re: New E30 (320i) with 325i Engine - Touring

sold parts

suspension parts needed

Re: Horrid vibrating noise......Help

Horrid vibrating noise......Help

tech 2 rear bumper

Re: Ignition switch location?????

Ignition switch location?????

sunroof deflector

Re:

Re: OBC Fitting Query

Re: M30 ENGINE SWOP

Re: OBC Fitting Query

Re: OBC Fitting Query

Re:

Re: M30 ENGINE SWOP

Re: OBC Fitting Query

Re: M30 ENGINE SWOP

Re: M30 ENGINE SWOP

Re: M30 ENGINE SWOP

Re: M30 ENGINE SWOP

Re: M30 ENGINE SWOP

M50 ENGINE SWOP

Re: 5 stud conversion..

Re: 5 stud conversion..

5 stud conversion..

Five Stud conversion......

Re: Car Idling funny

Re: front knock when conering

Re: Car Idling funny

Car Idling funny

Re:

Re:

Re: M3 FRONT SCREEN

M3 FRONT SCREEN