E30 Zone

@ mongomushroom damn you

you making my head spin lol, i see how the auction goes i won't let it go for nothing

I don't think she would make it to portsmouth the clutch is bad and i don't want to destroy the flywheel.

ecu is a 173 theo from the zone did it

thanks for all your replies, car is now for sale

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0657203447

@ speedtouch, i have had this problem, but have been upgraded to motronic 1.3

thanks i will change the afm asap it can't be that difficult and report back, sounds like it could be the culprit now you explained the speeding up and slowing down. but as i said it happens mainly underload

hi thanks for your replies, been out in the car, i made a mistake the revs they dont drop to 0, they drop to around 1.5 to 2, car idles fine not lumpy, it idles at 1.5 when cold and drops to just below 1 when warm, the car never has a problem starting always 1st time even in the cold

ok read the thread, when the engine cuts out the revs drop to 0 and in split second they shoot back up to 5000 or however many revs im giving the car, it doesn't stall and no lights come on the dash, its only happens when i boot it. I have experienced stuttering when driving at normal speeds this do...

cheers guys

anyone ??

hi all, my clutch is slipping in my 325

i cant afford stealership or garage prices to do it, is there anyone in bournemouth/poole area that can help, im happy to pay of course, i really don't wnat to have to get rid of the car as ive put so much TLC into it, any help much appreciated thanks.

Hi all not been here for a while, hope you all had a merry xmas and a happy new year !! on with the issue. I have 325i on a d plate, Ive noticed under load when giving it the beans mainly in 2nd the car revs drop suddenly, then straight away the car comes back to life throwing me forward, it doesn't...

hi all i can't see the washer pump anyone tell me where this is located please, cheers

the wipers work but the washer motor doesn't it easy to change the motor many thanks

no cant hear the motor running

hi all my washer jets for my windscreen have stopped working, is there a fuse for these ?? my mot is due next month so i need these to work, where should i be looking !! cheers

thanks pete alternator works a charm, great seller *****

thanks daimlerman appreciate your reply, i would have a go but im restricted as i live in a 2nd floor flat and have no place to work, hoping i can pay someone to do it for me !!

hello all, i need the top mounts on the front of my 325i doing asap, anyone in the bournemouth area able to help ?? cash waiting, just dont like the 180 quid i got quoted for one side by my garage seems a bit a steep, many thanks

thanks :) my car clean compared to yours but i do notice rot on the some of the seams around that area under scuttle vent on the passenger side on my car , i want to get it sorted before it end up as bad as yours but credit for saving her i wish i had the space otherwise i would be giving it go as w...

Thanks GrrrMachine i wish you lived in the uk, anyone know the cost of a job like this ??

The bulkhead is double skinned, formed from, I think, the red part and the front half of the blue part. It's quite common to find that the studs that the glovebox attaches to (RH drive) are rusted off. This is caused by the sealant failing along the bottom of the area under the scuttle, ad water ge...

ive done this twice now im not experienced either, but i did the cut option, you cant even notice when everything is back in the car, but a Mechanic that also owns e30's told me you don't have to take heater matrix completely out, you just have to loosen it which kinda make sense !!

Hi all sorry Ive not been around for a bit, been really busy moving house and so on, i just wanted to show off some of the work i had done on my much loved e30. I live in Bournemouth and i recommend this guy to anyone is workmanship is 2nd to none and hes a real nice guy :) http://www.trickettweldin...

thanks

connect a bulb/LED from coil + to earth

how is this done, i have no clue ! but ive had the same problems latley, cheers scott

Pre-facelift car with an S50/4, that sounds lovely, just a ordinary chromie on the outside, & on the inside....

+ 1

at the services or at the viewpoint ? what filling station is poulner services ? i dont have sat nav

thanks, what time you meeting at burley ? midday i got it

where in poulner you lot meeting might just tag along

+!

where bouts you guys meeting at poulner and what time ? anychance i can follow someone from bournemouth please ?

m 50 will be more involved as you are probably aware, and the brakes will have to be changed

does this apply to 325's aswell ?

I am sorry arnt we aloud to have a bit of crack as well now. fair comment m8, just seemed you guys where ganging up on this fella :!: Will everyone stop having a laugh. Just fit engines in winter for peanuts to keep these young men happy. There toys are getting through all over the floar :chuckle: ...

what's with all the wind ups? me thinks some of you zoners need to get out more

My mechanic buddies are neither poorly paid or inept :? Then get them to do the job! Why the rush to get the job done over a weekend? Let one of them have the car in, take their time and do the conversion. Beemerlad hadn't done it before, and he did it twice. sorry m8, but quite clearly he wants so...

Search found 220 matches

Re: running problem

Re: running problem

Re: running problem

Re: running problem

Re: running problem

Re: running problem

Re: running problem

Re: running problem

Re: clutch

clutch

running problem

Re: washer jets

Re: washer jets

Re: washer jets

washer jets

Re: Softtop

Re: front top mounts

front top mounts

Re:

Re:

Re: Scuttle welding

Re: Carpet removal?

giving my e30 some much needed love

Re: engine cutting out

Re: engine cutting out

Re: Has anyone on here ever...

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Re: