E30 Zone

Yeah that's it

Running 10psi, hasn't been fully set up yet so unsure on power

Ok maybe just updated should do for now as don't brake from high speed much would be fine

Ok so some hoses and 4 pots would be way forward, just depends what I can get behind me wheels, the Rx 7 calipers seam common can they be used up standerd disks or would they have to go bigger

Would new driled and Groved disks all round with some decent pads and good ridge hoses be enougth

At the mo I've got 14" bbs wheels but I will be having 15" on soon not sure what size I need, I have turboed the bm so would like to stop a tad quicker lol

Hi I am looking at upgrading my front brakes was just wounding what options I've got as in new big brake kit or what other brakes fit and are a good upgrade

Right I took the ign switch off yesterday and I unplugged the electrial connector cleaned connections I tested it using a screwdriver and every time I turn the ign on the ign lights came on on the dash, if I turn the ign to the 1st click then to the ign click the fuel pump dosent make a noise, but i...

ok mate will get that a go in the morning cheers

hi i went to start my car to day and turned the ign on and there was nothing, throught i had a flat battey turned it off and on again and as i wiggled the key the ign came on and the fuel pump primed so i wiggled the key again and it primed again as if i switch the ign off and on, but didnt it was j...

Oh right didn't relies there was a different way I'll look into that as car aint on road yet cheers

Ok so would I off been best to blank it off with a u bend pipe so it can still flow

im running the standed oil cooler/filter housing just with the cooler ports blanked off with bolts have aslo spin housing round and got smaller filter so the mainifold fitted

Cheers for quick replay has answered my question I have used the green wire to power my coilpack and have used the purple with to power the mega squirt ecu

hi i have a 89 e30 325 can anyone tell me what each wire does on the back off the ign barrel and also what the wires go to cheers mike[/i]

got a quote from sky insurance to do and there quote was spot on 1152 works out good to pay monthly, think thats the best im going to get with me points and age cheers for all ya help and ideas :D oldroy have you got any pics of your car with the steels on and also how wide are they as ive got some ...

Got to quotes to day Adrian flux want 1295 and this company called Alan Alan they want 1785 I will give sky a call tomoz The Adrian flux price is around what I was expecting but I like to pay my insurence monthly mean that it will be about 1500 from them so I'll keep hunting around lol cheers for yo...

What company would you recommend to get a quote from cheers mike

Yeah I was thinking around there haven't insured mods on any off me cars before was gonna try Adrian flux for a quote

lol yeh not to worried about how much its going to be was just after a rough idea on what it would be and the point where speeding

hi all i am going to be getting quotes on the insurance on my bm soon its a 89 e30 325i just turboed it to and im planing on insurering all the mods, was just wounding what insures u use and what mods you have declared and also how much as i wanna get an idea, im 23 4yrs n/c but 6 points lol

right had a better look after work took glove box out and defo havent got that relay i have also tested the sensors with a multi meter and they seam to be fine, im a bit stuck could it now be the pump or the abs ecu.

Ok I did have a look this morning mine is a g reg and I couldn't see it any ideas on what it could be if I haven't got the relay cheers for help

Can anyone tell me the location of the abs relay as the pics I see on google said it on top of the abs ecu but on mine it isn't I've got to orange relay behind it and a blue one to the left of it. I was looking for a relay with a metal outer casing Is that right

oh that may explane it as i had the booster pack on it at work as battery was low cheers for help will check relay to day

ok then may try taping a the relays my be stuck where its been sitting for a yeah cheers for help

hi ive got a 325i e30 g reg and i have had the car off the road for a year have just plugged the abs sensors back in as i had the front valance off and the light has stayed on tryed locking wheels up down road but no difference just wounding what the best way of testing them is, abs was fine before ...

because ive had to spin the housing so the filter is point upwards to allow for turbo mainifold

hi i have got a m20 325i and im after a smaller oil filter that will fit me car, has anyone done this before and no what one off a diffrent car will fit. cheers mike

cheers

ok mate cheers

hi i am getting some new wheels for my bm but they are not for bm the are 4x100 and offset is 17,and they are 8"wide will they fit on with out spacers also got gaz gold coilovers if that makes any diffrnce to then fitting. and also does any one no what size the bit is on the hub where the wheels loc...

hi i have got a second hand wireing loom for my bm 325i the tps sensor plug is diffrent to my old loom, ive been told it the one from a auto, is round with 6 pins i think, what wires do what so then i can change the plug to my old one

hi i am currently turboing my e30 325, i am wireing up a megasquirt 2 ecu but can i use the standed icv, has any one allready done this if so how do i wire it up as i think the icv has a live and 2 signal wires.

cheers for the quick replay

Search found 62 matches

Re: Bigger brakes

Re: Bigger brakes

Re: Bigger brakes

Re: Bigger brakes

Re: Bigger brakes

Re: Bigger brakes

Bigger brakes

Re: possible ign fault

Re: possible ign fault

possible ign fault

Re: Oil cooler help

Re: Oil cooler help

Re: Oil cooler help

Re: ignition wiring

ignition wiring

Re: Turbo insurance

Re: Turbo insurance

Re: Turbo insurance

Re: Turbo insurance

Re: Turbo insurance

Turbo insurance

Re: abs light on

Re: abs light on

Re: abs light on

Re: abs light on

Re: abs light on

abs light on

Re: smaller oil filter

smaller oil filter

Re: hub size

Re: new loom

hub size

new loom

m20 turbo

Re: wireing help