E30 Zone

many years ago a guy on here was able to re bore thorttle bodies increasing airflow and in ture giving better performance

cannot remember who it was and the email trail has been deleted

dont supose anyone knows who it is???

the guy did a really good job and at a good price

regards jon

nope not lucky stitched in bugger...........

hallo all does any one know if it possable to replace the rear screen on an e30 325 soft top as mine has ripped and it Ã‚£700 to replace the roof any ideas people.........thanks...........

i am in scumdeeeeeee dont see many e30s well nice ones any way apart from my mates 3Xe30 m3's and my 327...................j

nahhh my mate also had one with a zenda kit on it and it was zinnobar red now that was ace.........j

a mate of mine had a 2002 with 2.5 engine running gear ect it was ace but an awfull colour......j lime green

yeah i bet you mean gallons per mile lol bet it sounds ace thou its just have loads of 2002tti carbs layin around woundering if it was worth trying.............j

allo all is anyone out there running a m20 2. 2.5 or 2.7 on carbs webbers or any was thinking of running up my 2.7 with weber's any ideas?????......................j

I've bought them off him before with great results but have lost his email address and a mate of mine is after one. Can anyone help me out??? ............................... Cheers j

sorry dont have pics of them but the are sun fade ox blood red recaros ok condition leather is good but faded and cracked

.........j

hi all i have a set of red leather recaros going in to my 327 which has black roof lining rear shelf yadda the thing is the seats leather is great but needs re dyeing how ever i have lots of black dye should i dye them black???????? ps the car is silver and is going to have blacked out windows cheer...

lol the only thing on my rocker cover thats painted is the background black the lettering and the lines are the oricinal metal poliched to a mirror finish....................

honist indian....................j

by the way if anyone wants a rocker cover like that give me a shout i can run some more off as i did them my self and i did the inlet manifold as well but that takes ages so let me know.................j

my mate got all of the engine parts head kit sump gaskets pistons the looked the same as the ones i took off the 325 two offset dents for the valves and slightly domed one one side the head was done by agra (engine tuning) i think all in all its cost me about Ãƒ”šÃ‚£1500/Ãƒ”šÃ‚£2000 but it is totall...

well where to start i built the engine myselffrom scratch i started off with a few engines as spares a 525eta, 325i we were going to use the 325 block the eta crank conrods however even though the eta's block and 325 have different part numbers the blocks are the same so we decided to use the eta bl...

at last all i have my 2.7 compleated and up and running the engine is running like a dream ,faster ,louder, more tourque the engine looks the part as well as the block ,head ,rocker cover inlet manifold were all cleaned and polished painted and a nice 2.7 badge was added to the inlet manifold the en...

lol i can do better that that my mates cars: bmw e30 m3 bmw e30 m3 chucotto (not spelt right) bmw m6 (have fallen in love with this car and i get to work on it) bmw m5 not the newest one but the one before that bmw m5 same as above bmw z1 stunning and rare bmw z3 m coupe bannana yellow (not my taste...

e30sal wrote:Would you go the BMW for your CAM Shaft for Ãƒ”šÃ‚£250.00 or German Swedish at Ãƒ”šÃ‚£67.50?

Big difference?

or spend another Ãƒ”šÃ‚£150 and get a shrick uprated and get some more bhp out of your engine..................j

ok dude will do think everyone is having probs with this at the mo..........j

bloody hell that sounds liek an animal mate. what e30 shell u dropin it in to? its going in a 325 se 2 door withall the trimmings bkackroof lining red leather recaros cruise controll yadda yadda yadda and i think it will be rapid but once its built its 1000 miles of low rev gentill driving at least...

hi ant i have been emailing you for ages not sure if your getting the emails trying to get a chip for my 2.7 if you could email me at jlrghost@hotmail.com thanks mate........................j

woo hooo well i have atlast got all of the bits for my 2.7 the eta block crank conrods 2.5 pistons head which has been portted polished skimmed has a shrick 284.272 cam in it bbtb all i need now is to assemble the whole lot and for the company to send me the right crank bearings i rang them asked fo...

hello all i am sure this is asked alot i have a 3.64lsd i am after some good lsd oil for it any sites ect where to get the good stuff...........j

well the reason i ask is i have the eta full engine and my 325 so i am needing to know whick parts i need to make the one 2.7 my mate recons its the eta crank the conrods the 2.5 block the 2.5 head and the 2.5 pistons???????...................... j

erm how about elephant??????? .................j

right does anyone know whick block and how to teel for sure its the right block to do the 2.7 conversion????? cause the guides are pretty vauge and i am dyslexic so unless it clear i havent a hope in hell please help me someone and tell me what i need............j

does any one have one and is it ant who does them?? how easy to fit you know the all usall questions with zone mods yadda yadda............j

allo all is it true about fitting an m30 afm to a 325 make alot of difference if so does anyone have one???????.............j

just watching the new series of csi 4 on dvd and there is an eposode where a flat e30 325 turns up

and they re in flate it

.............lol quite cool...........j

thats to rough for the road and you loose too much lower down tourque but thanks for the offer.............j

allo all i have a ported and polished hed on its way to me and i am deciding if its worth puttin in a shrick cam kit i was recomended in the past a 272/272 cam any ideas as the car is a road car just nice to have some more tourque now and again also where to get one and how much for a kit???????????...

lol

i dont hate it but it is very funny................j

make one lazy

lol thats what i did i made a heat sheild wall in my engine bay to partition off the cone filter from the rest of the engine makes loads of noise sounds great

......................j

is it hard to get hold of????? and is it expensive cos i need to put some oil in my 3,64 lsd before i put it back on to my car..........................j

dont mean to burst your bubble and i dont mean to be be pickky but you know how how ofter drlled disks crack and fail a mate of mine had a bran new set of brembos fail when racing his m3 he was lucky to get away with his life let alone his car

............j

Search found 123 matches

throttle body bore????

Re: soft top rear screen

soft top rear screen

me too

hmmmm

m

has any one running a m20 with carbs???

Does Ian still do the E30 bbtb??????????????

sorry

dilemma dye or not to dye

lol

ps

not sure

where to start

2.7 compleated....wooo .....hoooo

my mates better

Re: What would you do? CAM SHAFT

ok dude will do

ANT please read

woooooo hooooooo 2.7

where do i get lsd oil????

well

erm

right 2.7?????

zone chip???

m30 afm??????

e30 325 on csi

aye

shrick or not to shrick????

ooooooo

erm

ooooooooooooo

erm