E30 Zone

iv got a m30 box , i just dont have a clutch or prop for it and the m10 box offers alot more room to be able to change the clutch without taking the engine out !!

s14 stuff , that m3 bits right? do you know what sort of ball park figure im looking at for a clutch and flywheel?

many thanks
nick

just done my conversion , the thread made the job a doddle, made up my own solid mounts and will be producing them for £75 a set ,solid and non solid versons for use with e30 rubbers , i was very impressed that there wasnt much vibration with solid mounts

nick

h there
does any one know of a uprated clutch for a m10 box or a clutch that will fit
iv just done my m30 convo with a m10 box and clutch and its slipping like hell

cheers nick

im using a twin 2.25" 500x300 powerflow box with 2.25" pipes up the manifold , not too noisy but sounds nice

nick

1. Zaust
2. Winx
3. Leeparkes
4. Gareth
5. Martin
6. Ben
7. Chris
8. Martin - MJJ_ZX6RR
9. Me (Blingsta)
10.charlie
11. Baurluvva
12.rich grayling
13.leroy
14.Rav335uk
15.scottidog
16. kms_racing (nick)

awsome , thats exactly what im looking for , cheers brian

many thanks
nick

hi there
i am looking for a ecu pin out diagram and a engine loom diagram for a facelift 320 , i cant find anything on the interweb and need this fairly urgent
can any one help me please!

cheers in advance

nick

i used uprated volvo 340 engine mounts (with clio 16v convo) . they were spot on and irc only cost £20 for the pair from nev at f1moto 01474850850

sorry if this is not the right section to put this in ..... a mate at work ha a e36 with a m50 single vanos engine , with a anoying whine it also has a tappy sound from the vanos area are they linked ? we have changed alternator +belt+ water pump and cant solve the noise . the whine goes away when t...

il have a look at the center bearing today , im unshure of the rotation as it was fitted to the manual prop when i brought it , should there be a rotationial arrow on it ? i was blaming the death on the fact its a drift car so gets alot of cluch kicking abuse ect. I still think that even with a good...

i have a pretty dead prop dounut/couplermagig on my e30 , it was in pretty much new condition when i did the manual convo 2 months ago , so to save the hassle of changing them every 2 months i was thinking about making a solid one up out of steel or ally , i cant decide if this is a good idea or not...

lol ..... it gets my car back on the road for the moment .

just out of intrest whats the problem with the "early primitive system "

nick

i decided that im going to change the box for the moment as a mate has just given me the right box, i just need the right flywheel with the trigger pickup on .... would tacking a small strip of steel to the flywheel suffice

cheers nick

where abouts would i find this socket that you speak of , is it the one on the bulkhead just behind the inlet

cheers for the replys Don't even attempt to use the primitive early system! Fit the crank pulley, crank position sensor, engine loom, oil pressure switch and ECU from a facelift 320 or 325 with a 55 pin ECU. If you use the 320 ECU, you ill need to fit a 325 chip to it. how hard would it be to do so ...

iv just started a manual conversion on my 87 325i ....... easy apart from it wont start ! the auto box had 2 sensors ,what seamed to be crank angle sensors on the starter motor side of the box i drilled the holes for them , put a trigger pick up onto the fly wheel but cant get it to spark i have bee...

cheers for the nice welcome chaps .... it get a few pics up soon , i have a distinct lack of computer know how so il have to wait for a mate to help me

hi im nick and iv just got my first e30 , a 1987 325i auto im in the process of doing a manual conversion at the moment,ready to get the magic kms sideways touch
i thought i better sign up to the zone and say hello ,

nick

Search found 18 matches

Re: m10 uprated clutch?

Re: M30 conversion guide - WIP; input required!

m10 uprated clutch?

Re: EXHAUST

Re:

Re: face lift 320 ecu pin out diagram?

face lift 320 ecu pin out diagram?

Re: Uprated engine mounts??

e36 325i whining/ vanos noise ?

Re: prop coupler/dounutmagig

prop coupler/dounutmagig

Re: 325i manual conversion problems!

Re: 325i manual conversion problems!

Re: 325i manual conversion problems!

Re: 325i manual conversion problems!

325i manual conversion problems!

Re: yo another newbie

yo another newbie