E30 Zone

Brian any noticiable increases/decreases in torque power?

Hi all, just on the off chance has anyone ran a 318 without rear box, ie. straight through system with standard centre box. This would be used for track use ive heard rear box makes no difference as standard centre has a cone baffle. Any opinions appreciated.

ok many thanks guys, why would it have a black cap with no pipe is that so the wee pot can be mounted on both sides??

Hi all I am in the stages of a complete engine rebuild, although i have come across a hurdle. The engine is a 1989 318i, on the throttle body there are two vacum pipe nipples, one pipe is on there which goes to a black vacum pot and on the otherside there is a short pipe with a screw in then end! im...

hi

I have rebuilt 318i engine to race spec for a series this season. I would like to reset the milege odometre so i can tell how many miles the engine has done in between builds. Does anyone know how to do this, ie clocking it etc?

Many thanks

thanks for help guys i think taking the window out seems the most sensible option.

Thanks brian for your response, also experiencing problems with dash and heater system as i have a front dash bar as part of the cage and cannot fit dash with associated plastic funneling attached, any experience of this?

Any help appreciated, have recently had the car resprayed currently re-fitting rear windows (its a coupe) thye metal window surround is meant to push in between the window seal but i cant for the life of me get it to locate in the channel. Is there a knack to this ie taking window out and fitting su...

Does anyone know for PBMW if you have to run horn, rear number plate lights and reversing light? cant find these in regs, as surely not required.

Thanks

was that in a 320 or 318?

Has anyone done the rear coilover spring conversion ie welding coilover sleeve on rear trailing arm and ran 2 1/4 springs with adjustable damper. I have debated whether to do this and intruiged to see peoples opinions and if possible some photos of the setup.

Many thanks

does anyone know if 320 drive shafts will fit rear disc/hubs. I currently have 318 shafts which dont.

Thanks

are they coilover on the rear or damper and spring?

thanks for the replies will u2 liam re his shocks, thanks brian.

Hi

Does anyone have any experience of Spax RSX coilovers on an E30 on the track or road? and if so what are the opinions.

Thanks

Does anyone know when the for sale parts and wanted forums will be open or moved as stated?

thanks for clarifying guys...i dont suppose anyone has one for sale??

I have just changed over from power to manual steering rack and have discovered the steering coupling is to short, does anyone know if its just a case of getting a complete new coupling or are they broken down as individual pieces ie just purchase a longer shaft. Any help appreciated or if anyone ha...

Has anyone had any experience with SPAX rsx coilovers on an E30?

If so what are the general opinions?

Hello

Price for a pair of the following 31129061222

believe others have paid around £25 mark per pair.

Regards Alex

thanks for the replys i have it mounted in the other holes i guess it must all be ok, just didnt seem right to me the end of the tie rod would be touching the brake disc backing plate.

Hello I am preping a E30 track car at present, I have recently bought a manual rack to swap with the power rack currently on the car. Yesterday went for a fit with new manual tie rod ends and it just doesnt fit as well as the power rack. The small end rubber boots on the pivot ball joints touche the...

Are your BBS wheels powdercoated or painted?

cheers karl

Hello

Could I have prices for the following part numbers.

25117527252

41141972592

Many thanks

oh Bugger, thats what I thought!! Thanks for all your help.

Thanks Clarko, had a look on real OEM i need the inner outer of the arch if that makes sense, the arch is made from two sections. I have been phoning round to find one nobody seem to stocks them, Ive tried ECP, they dont, any other suggestions where i can get hold of one?

I am wanting to have my 15" BBS wheels painted black for trackcar etc. I have seen a few people with them done, they look like they have been powdercoated or satin sprayed. Has anyone had this done or know of anyone who does such a thing and what the correct technique is? Any pics would be a great h...

Thanks, I will give it a try!

Has anyone had the pleasure of replacing a rear inner arch and if so is it possible without the removal of the rear quarter panel?

Thanks

Need a new camshaft for M40 engine fairly quick, have been quoted £250 mark from BMW, just looking for some advice on prices etc, where have other people purchased from?

Any help appreciated

Email sent. thanks

Hello, have a rather long list of engine parts required for a 318i 89 engine re-build. Hope you can help. Valve timing gear ”“ camshaft 11311709580 x 1 11331709063 x 8 11331712010 x 8 11349059171 x 1 11341721007 x 8 11341721006 x 8 11331727202 x 8 11421727054 x 1 11421727600 x 1 07119915002 x 2 1112...

Search found 33 matches

Re: M40 exhaust

M40 exhaust

Re: help needed with throttle body

help needed with throttle body

milege odometre

Re: struggling re fitting rear window surround!!

Re: pbmw wiring question

struggling re fitting rear window surround!!

pbmw wiring question

Re:

rear suspension

Drive shafts

Re:

Re:

Spax coilovers

locked forums

Re: Steering coupling e30 318i

Steering coupling e30 318i

Spax RSX coilovers

M3 eccentric bushes price pls

Re: Manual steering rack fitment

Manual steering rack fitment

Re:

Re: 2 prices pls

2 prices pls

Re:

Re: Rusted rear inner arch!

Wheel painting

Re: Rusted rear inner arch!

Rusted rear inner arch!

318i camshaft help

Re: Engine prices please.

Engine prices please.