E30 Zone

A tec 2 no spolier in black may own a blue cabby as well. Liking the car
looks well

No 4 a save bet it will look good, No 1 will look really good or really chep, would have to see them on your car. Make sure you get some pic's when fited

Take the tipper that would be a chalange. M.A.N should take one of there units unlimeted of corse. wear you sticker with pride

By tuneing the wheels and leaveing it in gear makes it harder and noisyer to drag, a good alarm with antilift, the prick that stole you can will do it to the wroung person one day and he'll get what he deserves what go's around come's around

Well looked then good to see you lagh about it

Nice looking clean car hope its a good one for you cant wait to get back in an is. Sorry dont now any histery on the car

all the above and best of all he drives 318is top man

afer haveing owed 2 320ise and now a 318is i would say go for the 318is its a much better car and costs a lot less to run for a lot more fun, service costs are a lot less as well and the e36 318is has the same engine so engine parts are still ok to get hold of, 320 about 60miles for Ã‚£10 318is 80mi...

thanks just needed to no for peace of mind

can any one tell me the runing temp of a 318is and if the nidle is ment to be below half cos my temp sits at half way all the time when left runing or when your driving

thanks for any help

john

or you can just swop the swing arms, if all the wheel bearings,discs and pads are ok and your beam bushs are ok just bay new hand brake cables and 2 new steel brake pipes, remove hand brake cables and brake pipes, undo the shock bottom bolts and the 2 bolts holding each swing arm to the beam, then j...

ive just found out that you can bay the batterys in the clocks ill tri and find some waer that sells them tomorrow

thanks anyway mate

Anybody now of anythink i can try befor i spend Ãƒ”šÃ‚£80 on a board, as this fault is starting to bug me as id like my car to be 100% rigth, any advice i would be gratfull of

Hi all, ive not long got a 318is, the fuel guage sometimes bounces about and when you tune the heaters on to full blast the fuel guage and temp guage move up a bit, ive been told this might be the si board, is the si board the the printed circuit board that the service lights are on, behind the cloc...

m-tec 1 all the way

thank for the replys, so the pre face lift cars can have the engine bay loom removed without the rest of the loom, witch is wot i should have asked the first time

thanks

anybody

Hope you all had a good christmam, just befor chistmas i kill the engine in my 320 so its 2.5 time and i need to now if the pre face lift 2.5 engine will run ok in my face lift 320, id be useing the ecu tb and inlet manifold from the 2.5, thats if the ecu will plug in to the 320 loom

Thanks

John

ive got to take the engine out now so i might as well put it in then, if i need any advice can i ask you if thats, i wonted to put a 2.5 engine at some point so its not all bad news, it just means ill have to do without the car for a bit, the bad news is ill have to use a astar 1.7d :cry: fwd :x tha...

any improvment cant be noked, anyway the bad news is i killed the engine in my car about 2hr ago

wich is a bit of a bummer, ian have you put an e36 rack in yours

thanks for the replys, it looks like the e36 steering rack is going on then,
has anyone on hear do this with a non m3 rack and is it worth doing, i wont be doing it tell after christmas but when its done ill let every one now what i think,

thanks agen

hi all, can anybody tell me if a 316 e36 steering rack has less of a lock to lock than the e30 rack and is it worth doing the conversion, i have a 316 e36 rack already, ive read the article on the conversion and i am willing to give it ago but the article is for the e36 m3 rack thanks for any help o...

as long as all the i.s stuff in good nick

hope its a bargain and alls ok for you

only stip the car (f/r lights, door handles, locks, rubbers and seals) alot of painters wont like working on cars that thay havent prept them self

performance bmw are doing up a e21 there getting someone called frits bits to do all the work thay should be ok to sort you out for all your needs www.fritsbits.co.uk (01823669425) thay deal with all the old bmw cars hope that helps you out

ive sent you a pm

check your rear beam bushs, diff bush, and rear swing arm bushs, thay can all make knocking noises from the rear when seting off, swing arm, and diff bushs are ok to do but beam bush can be bad as the beam can be hard to remove from the car, hope this helps and good look sorting it out

your car looks sweet on the 15bbs, looks a lot better than the 17s, how low is your car it looks cool, thats how mine gona look soon

how can i tel a gen 2.7 alpina engine thanks for any help

your car looks cool as mate, just like to now the size of the wheels, thay look about 18in or is it just my eyes not working, anyway nice car

ill have a look later for you, did you mean 325is as in sport

witch e30 is it the sport/318is (m-tec) is lower than the rest of the e30s, about 15-20m i think, my 320 has m-tec suspension so if that helps ill cheak for you later to day

should have look on there first

thanks

i was thinking about an interior out of a late sport the stripy one, dose any one now how much it would set me back, thanks for any help

looks very 80s, im liking them,

Search found 46 matches

Is it your tec2 stockport

Re: what "mim" finish??

Re: Nurburgring sticker or not?

Re: ways to prevent your car from being stolen?

Re: why is there an MSA tag on my engine?

Re:

runing temp of a 318is

s.i board

engine

e36 steering rack

tommo-320

engine numbers

325 sport interior