E30 Zone

good work, i was gonna moan at you for the lack of preparation (cleaning) on your ali welding but saw it was only a jig ! but i reckon the neatness of your stainless weld would benefit from larger rods. I'm not saying there gonna brake, they're pretty good. Though there is some undercutting and clo...

Few hours today First I finished the shifter plate. Mig welded then ground down and filleted smooth http://i519.photobucket.com/albums/u359/sidewayssingh/BAA6D5FE-1541-491F-8EE5-56EED90CFF07_zpsbtugropy.jpg http://i519.photobucket.com/albums/u359/sidewayssingh/CE558944-43B8-4492-A7F1-47103AC6BA5C_zp...

Couple more hours today! I needed to triple check the gearbox/engine diff alignment to prevent any vibrations from the prop. Got an empty diff casing onto the beam but I didn't have a diff bush to hand so I tigd on an ally plate to locate the diff bolt. This was then fitted to the car. http://i519.p...

So on 31/4 we had a little baby boy so things obviously slowed down on this! However he's been in the garage with me and we've been at it again. http://i519.photobucket.com/albums/u359/sidewayssingh/78B959E4-3455-465F-A1AC-682D2C2FE002_zpsqb6gx8vh.jpg In the downtime I had much pondering was done an...

So spent most of yday and today getting the rack position right and working out where the column should come through the bulkhead all whilst avoiding any complex changes to the manifold We ended up with a combination of 1 series, e92 m3, and e30 joints. All connected with some 24mm Steel rod from a ...

I hope so!!! Today I had some Help from my brother and we came up with a good idea for the subframe, Rather than make a whole new cross section we decided to just reverse the subframe and this way it would only require notching and boxing in, so we got to work All unnecessary brackets removed from f...

So I've been planning the exhaust and ordering various bits and bobs. Made a start on some of the tig welding for the v bands.... Takes a bit of practice to get the eye in but my tig is getting better every time now and stainless always looks pretty! Here's some pics anyhow http://i519.photobucket.c...

Had a couple of hours this morning so did the Beginnings of gearbox mounting

Thanks Glenn!

Main structure of engine mounts completed today Will be braced further so don't take the mickey out of the design just yet :) http://i519.photobucket.com/albums/u359/sidewayssingh/36B41D46-7558-421F-A743-EF2DAFCB4DCF_zpsh5swc20d.jpg http://i519.photobucket.com/albums/u359/sidewayssingh/01C6B693-DDF2...

Continued with engine positioning today and aligning the gearbox to the centre bearing. Have managed to fit the bonnet on just at this height. Was very time consuming to make sure everything Bob on and to allow clearance for steering rack pinion http://i519.photobucket.com/albums/u359/sidewayssingh/...

The beginnings of the engine mounts this evening Got cutting/drilling some 6mm plate for the block side. This will then have arms which will join into a tube which will have the 40mm poly bushes in it. A single 12mm bolt will then pass through this. http://i519.photobucket.com/albums/u359/sidewayssi...

Managed to get some time to crack on today Managed to get the engine in and into a provisional position. It's just the height of it I need to fine tweak now as I obviously want the stock bonnet to shut but don't want the sump dragging too low. The s65 plenum is so tall this may be a challenge. http:...

OK let's have a complete direction change with this and go crazy!!!!! I came across a chap who was selling engine box and electrical gubbins from a e92 m3. Having lusted after one of these as a possibility for my S14 track car I knew I had to get it and the e30 seemed the right home for it. A deal w...

See u all there

Cheers Andrew.

It's a custom cages clubman spec.

I've updated my e30 build now.....

http://www.e30zone.net/modules.php?name ... 17#2608017

Some pics of rear half of cage getting sorted. Lots of in and out..... http://i519.photobucket.com/albums/u359/sidewayssingh/72AAE770-1550-40BD-B6BA-407483EAB23D-1131-0000008854EAE7C9_zps8430adf4.jpg http://i519.photobucket.com/albums/u359/sidewayssingh/8CBA9292-E453-49A7-A93B-CB7C774A2CDD-1131-0000...

This is my brothers e30, that he kindly lets me rag around occasionally. It's Minty mint brilliant red. My current e30 is preface lift chromey with sr20det, currently getting caged and mintified.

Ooooo arrrrr I say! It's not my first time, chk my other vids out in my cars....

Gd going!

Little video I made of my brothers e30 at Snetterton
M52, m50 inlet, bc coils, Porsche boxster brembos, 4plate LSD, stripped.

They're pregapped. I've found ngk way better than densos on the high Power skylines and silvias we've tried them on

Get NGk iridium grade 7s, if u can

I see what u mean now

Well the water will boil at 100..... I don't understand what u mean

Take sensor out, stick in boiling water-100degC, then tell datalogger that resistance at that point equals 100

I do believe Gunni didnt make the manifold, but you would know that if you had read everything about the manifold. the guy at DI tuning made it, Gunni just took the order, He has built more of these engines than i'v had hot sh1ts!! he knows his stuff (and i love my currys) not only has he brought o...

So the shell prep carried on, with few rust repairs and a lot of cleaning g of dirt inside and glue from sound deadening. I want to do this before I weld the cage in. Also cut out spare wheel well and rear bulkhead areas for cage to get through, this will be repelled after to recreate the firewall. ...

Stock t25 at its most efficient is 250bhp per turbo....

In that case just get the, rebuilt with 360deg bearings. We've used turbo dynamics before not a problem.

If its any use and u need a housing or something, I have one t25 here of a ps13 silvia. There's loads of knackered t25s around so if u have cracked housings try get ones which aren't cracked

I assume these are twin t25 fitment with internal gates and 5 bolt exit turbine housings? If so you can get roller bearing units in the same size...ie what you get on s15 silvias, and what. Used to run on my silvia at 300bhp 1.1bar 2 litre engine. What u need are 2 garret 2871r turbos with 0.64 exha...

Search found 3940 matches

Re:

Re:

Re:

Re:

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re:

Re: Chrome SR E30 of fun

Re:

Re: Chrome SR E30 of fun

Re: Chrome SR E30 of fun

Re:

Re:

Re:

Harjuns E30 M52 drifting at Snetterton

Re: Spark plugs in a turbo m20 b25 ?

Re: Spark plugs in a turbo m20 b25 ?

Re: Measuring Coolant Temp

Re: Measuring Coolant Temp

Re: Measuring Coolant Temp

Re: m50 turbo prepped engine

Re: Chrome SR E30 of fun

Re:

Re:

Re:

Re: