E30 Zone

hello, can i have a price posted and order number please on;

63211380419 x 4
11151276485 x 1

Cheers

Shaun.

Do the pipes of the handbrake just T off into the rear brake lines or do you have a run a pipe to the brake master cylinder?

I prefer the viscous fan to electric but if you do go electric the E34/32 aircon fan fits perfect This is good but weighs a tonne and draws alot of current, if i were you i'd measure the rad and get the best electric fan you can afford (kit car/race car sites etc.) Got a 16" slim one on mine, light...

I prefer the viscous fan to electric but if you do go electric the E34/32 aircon fan fits perfect This is good but weighs a tonne and draws alot of current, if i were you i'd measure the rad and get the best electric fan you can afford (kit car/race car sites etc.) Got a 16" slim one on mine, light...

heavy but some descent springs and it still handles well... if you want a cheap disposable engine with good torque you can't beat it, and when it blows there very cheap to replace!

or M30 has a fair bit of torque, cheap, heavy and dirty lump of iron, easy to convert and a hell of lot of fun and will easily kick the back out with the right diff

i was impressed when i saw his tyres where still intact! and there cheap too, i'll defo be replacing mine with them!

Jus keep me posted, i've seen the wilwood rear calipers but i'm too lazy to try and sort the brackets out

Hey Keri yeh that's me, such a fun day! Don't suppose you have a rough eta on the rear disc convo do ya ;) That was defo a fun day! Just a shame road tyres where over heating at the end of the day, defo need some semi's for next time. Did that photographer there have a website? gota be the driftday ...

Can you pm the details please Steve, think i might be getting hooked on this drift day!

Hey Shane,

The 280's are good enough on mine, plus 310's won't fit under 15" bbs iirc

By the way Keri that's some excellent pictures you got there! Cracking job!

That was defo a fun day! Just a shame road tyres where over heating at the end of the day, defo need some semi's for next time.

Did that photographer there have a website?

gota be the driftday next now!

I'll be booking this up after brands!!! (just as long as it doesn't blow up and/or end up writing it off!)

Cheers Steve, Just booked this up, cant wait

This sounds excellent, can you pm me the details please

That'll be good, wouldn't mind seeing if it can be improved, will contact you early jan and see if we can sort something out

,

Cheers mate

gd day i recon, but was strongly advised not to run due to the oil pressure light starting to flicker... then on the way home realised found that every time i rested my foot on the clutch or pressed the clutch pedal the pressure light went off, then found a dodgy wire under the dash when i got home!...

think you should go on slips and settle the score

i would of thought so, but never drivin an m50. Must admit though i thought the m30 would of made it alot worse handling than it is, considering the weight of the engine it still handles pretty well

i bought some hyped up bulbs a while back and although there no HID's there still a very upgrade to the standard bulb, alot more brighter, well worth the change for me!!

but the m30 is getting on a bit, if i was to do it all again i would have probably gone the m52b28 and tuned it, but the m30 is cheap to do and engines are cheap to replace if it does go bang...

times?

I got a 5.76 0-60 in my m30'd e30, but that really is if you get the traction down.

All booked up too, see you guys there!

Bring it on!!

I'm defo up for this one, would be good to see you there again too Shane!!

Steve - could you pm me the details and i'll book this up after payday

I'm up for a bit of that

1. Dan320is - ikkle M3
2. d6dph - 325i diesel snotter
3. tommy22 - m50touring (if penton pulls his finger out)
4. Jhonno - you know you want to!
5. Turkey - M30B35

damn, wish i was there, whens the next one?

early doors! count me in

1. Marc
2. Sal
3. Mark
4. Rob
5. Becca
6. WsV
7. Tommy
8. beemerbird if I manage to get up that early
9. Markymarky--ditto!!!
10. Kevin
11. Shaun (turkey)
12.
13.
15

early doors! count me in

1. Marc
2. Sal
3. Mark
4. Rob
5. Becca
6. WsV
7. Tommy
8. beemerbird if I manage to get up that early
9. Markymarky--ditto!!!
10. Kevin
11. Shaun (turkey)
12.
13.
15

1. dave318 (camping) (Pass posted) (recived) 2. BMWAlpinaC2 3. Driftboy 4. Colonel Sanders (camping) 5. Zaust 6. Sal & Alex 7. tylerma (camping) 8. bss325i 9. essexboy (camping) 10. d6dph (camp) 11. weezie 12. nelly 13. Ricey46 (camping) 14. leeparkes 15. Ziggy (camping) 16. Jon_Bmw (camp with carl)...

Just booked this up to! Just hope its dry! will see you guys soon!

can you pm me the detailstoo, i defo got to do it again this time!!!

lol, it seems ok when warm, but hesitant when slow, if i use a ecu from an E30 without EWS will this be able to start and run the engine. Just looked at the one i got and it looks like it is EWS so need another ECU either way unless they can be programmed?

lol Thats what i'm worried about, i've got the m42 ecu, is there a way to some how bypass the EWS to work with it, i just thought it was a chip inside the ecu programmed to work with the key, but i'm pretty sure the ECU that came with the M42 didn't have an immobliser so somehow need to trick the sy...

Hey Mate, not too bad, still smoking but going well! hope the 205 is treating you well, do love them things! It was a bit funny at first but after i left it running for a bit it smoother itself out and seemed to drive ok, but just a bit worried if leave it like it, it will mess up the engine or be u...

I'll agree that they're noisy, both of mine have been a bit tappety but still strong, and i got 0-60 in 5.76 with my mates G-Meter so there must be something wrong with yours, manual it i recon

Hello, Does anyone know weather running a 318is engine on an 316 ECU will mess the engine up or cause any running problems/emission problems? Reason i'm asking is i've put a M42 in my sisters E36 but because of the immobliser on the ECU only the original 316i ecu will start ad run the engine. It see...

Search found 184 matches

price please

Re:

Re: Electric Cooling Fan Conversion...?

Re: Electric Cooling Fan Conversion...?

Re: best engine for drifting

Re: best engine for drifting

Re:

Re:

Re: Oulton driftday March 13th

Re: Willood Brakes 280mm or 310mm Discs.

Re:

Re:

Re: Oulton driftday March 13th

Re:

Re:

Re:

Re:

Re:

Re:

Re: Cant wait for darkness to fall !!

Re:

Re: Track?

Re: Oulton Park Xmas driftday Dec 19th

Re: BBB Rolling Road Day - Ipswich - Sunday 6th December

Re: Oulton Park drift and car control day Sept 26th

Re:

Re:

Re: PBMW 2009 SHOW SANTA POD 19 & 20 SEPTEMBER

Re:

Re: Car control and drifting at Oulton Park Saturday 25th Ju

Re: using a 316 ecu on a 318is engine, anything to worry abo

Re: using a 316 ecu on a 318is engine, anything to worry abo

Re: using a 316 ecu on a 318is engine, anything to worry abo

Re: M30s, do they all sound like spanners in a washing machi

using a 316 ecu on a 318is engine, anything to worry about?