E30 Zone

Not sure really, any one got any suggestions?

I have a Cosworth powered e30 320i - H reg. Everything is done but I have a few problems. The 17 inch alpina replicas give poor handling, so I am looking for a set of 16 ”“ would hartage 16’s be ok? I am also getting very bad tyre wear due to 60mm drop all round. Apparently negative camber front top...

My car is fitted with gas colovers on the rear and eback springs and shocks on the front. It is lowered 60/60 and I get alot of tire wear on the insides of the rears. Apparentally even race e30 have intentional negative rear camber. I want mine set up correctly for track use. What should I do? Also ...

I have done a couple of track days now at goodwood and brands hatch. I try tifferent driving styles and lines but don't seam to be getting much faster. Next time I will go out with one of the instructors but are there any good articles or books which go into detail about track driving? Any other adv...

We can work out the details later, I am not tight and as long as who ever want to do it with me isn't either then no problems. I have found one mate who is fairly interested but I really want to split it three ways.

cheers Dan

I really enjoyed my first track day the other day, but at a total cost (inc fuel) of Ã‚£230 a day its a tad expensive. I am hoping to find one or two other people in the area - Southampton, Chichester, Worthing etc who is up for sharing the cost of a fairly cheap track 325i - Ã‚£1000ish and then all...

I really enjoyed my first track day the other day, but at a total cost (inc fuel) of Ã‚£230 a day its a tad expensive. I am hoping to find one or two other people in the area - Southampton, Chichester, Worthing etc who is up for sharing the cost of a fairly cheap track 325i - Ã‚£1000ish and then all...

Stage 3 - 360hp - Have you got a coolant swirl pot fitted?

cheers dan

I have a cosworth fitted in my e-30 and the down pipe already hits the uj on very hard left bends. Am I likley to be able to fit a z3 rack. Also would a z3 be too sensitive for track use, should I go for something in between? One end of the rack pipes have already been modified to fit the cossie pum...

I did my first track day today at brands in my cossied e30. Had a really good day but had a few problems. -Over heating: I had to turn the boost down to 0.6bar to stop it from over heating! Apparently a swirl pop might help - any ideas? - Fuel starvation I have a 30l alloy tank in the boot and if mo...

My car has the silver gutter trim, but to be hones I think it looks better in black. What is my best course of action:
- Remove mine, spray and refit - will they break when I remove them?
Get some black ones of one of you guys?

cheers Dan

Cheers Guys, anymore advise very welcome!

Hi Guys I know you want to see photos but i want to get it how i want it first. Been working hard and nearly there. Do any of you have the following parts and live close ish to Portsmouth? 1. Nearside smiley type head lights Ã¢â‚¬”a adjusters must not be stuck 2. Front and rear seat belts Ã¢â‚¬”a co...

I have now purchased a z3 rack for my e30 Cosworth. If any of you need a z3 rack look on 247spares.co.uk, quite a few breakers have them. I have a few questions before I fit the rack: Ã¢â‚¬¢ Where can I purchase the solid steering doughnut? The only clearance issue is right at the top near the bulk ...

Hi Guys

I have recentally purchased a 360hp e30 cosworth. I have got a track day booked this friday - my first one! Any good advice for bits I should bring? Tyre pressures etc. I have already done a fluid chance and fitted mintex pads.

cheers Dan

Hi Guys I have just purchased a cosworth powered e30. It is great in every way other than the steering. The rack is a standard 320i one and its very vague and I actually find it quite difficult to keep it in a straight line motorway speed. I was thinking of fitting a z3 rack but have heard that they...

Hi guys, I have just purchased a e30 cosworth and am planning to do a track day on the 25th Jan. The car is fitted with standard 325i brakes and I am having a break upgrade in Feb so just want some used pads suitable for track use - they only need to last a little while

cheers Dan 07979 50 70 80

Apparently the turbo is out of a race car and the restrictor has been skimmed out. Do you know where I need to connect the green wire on the back of the rev counter? The dials are out of a 4 pot so should be ok. What 1/4 times have you run fuzzy? Can't wait to go heads up with my mates 410hp skyline...

I am also after a genuine sport kit, and the inner nearside head light

cheers Dan

Cheers Guys, the 1/4 time was 12.9 seconds with 18' rims - the problem is getting the power down. Will get some pics up soon.

I have just purchased an BMW e30 with a stage three Cosworth engine fitted Ã¢â‚¬”a 360bhp! This is a truly brilliant car Ã¢â‚¬”a very nippy to say the least. Questions: 1. Can I fit an electronic boost controller? I always had one fitted in my skyline and it was nice because if a friend/ girlfriend ...

Search found 21 matches

Track e30 cosworth turbo stage 3!

My cars setup.

Getting lip times down

Re: Any one up for doing track days with me?

Any one up for doing track days with me?

Any one up for doing track days with me?

Re: First track day at brands - got the bug!

Re:

First track day at brands - got the bug!

Change silzer gutter trim to black.

Re: Brands hatch Friday 25th - E30 cosworth.

E30 cosworth!

Re:

Brands hatch Friday 25th - E30 cosworth.

Re:

Half used pads for track day

Re: I have just purchased a Cosworth powered E30!

Re: I have just purchased a Cosworth powered E30!

Re: I have just purchased a Cosworth powered E30!

I have just purchased a Cosworth powered E30!