E30 Zone

Good base for a project

it will stop the wingers

Well if you won't to make it totally fair you have make it an auto test
That way a well maintained 316 with a good driver will be to addle to beat the most out rages E30 out there

Class A up to 2L Class B 2L and over Class C 3L and over Class D Turbo / Supercharged / NOS / Regardless of engine size Now before you all start wingin about Class D I will point you in the direction of The Renault 5 GT Turbo which is a 1.4L that will do mid 13s all day long with a couple of tweaks....

IT not all that bad if you can weld and tern a spanner Get all the bits together take lots of photo for ref Make shore you no were the front / centre of the crank is So you can line up the new engine cut and weld new mounts Then it the gearboxes if it will fit in the tunnel or do you make an An adap...

I had a set on track car there were not good on track
Compared to the yoko a385
Got no feedback and the grip was non-existent just slid when you
Push hard in to the corner and spun up on acceleration
I was not impressed at all
But as I say sis is all on track

Toyo r 888 the mutts nuts

Get a divorce She took the lot

Type 9 because I got one Vauxhall bell housing Home made mounts gearboxes and engine Home made prop E30 rad Saab intercooler E30/Saab exhaust home made Sump wait and see / ball ache Saab flight doing the black magic Not fort about difff yet And a packet of plasters and aspirin All to start on the 8 ...

The Saab can make 500 bhp on stranded internals
No c20 let can do that
Plus had lots of Vauxhall and the new stuff is badly made
Were the Saab is just bedded in at 100 000 miles
Ã‚£2000 with a 2.3 head will get you 400 + bhp
Do that with a c20 let

I have been taking to Saab flight they recon 240 to 280 is well with in The scope of the stand management The plan is for me to do all the physical work then give them the car To do black boxes magic A lot will depend on the exhaust as they respond well to a free flooring exhaust As this is all bein...

thats the 1
Rafter 94 they used Vaux BELLHOUSING
So you can fit it to a ford boxes with a new bell housing or
Use a rear wheel dive Vaux boxes
Or you can see if it's possible to make a plate for a BM boxes

NO
ok then I will tell all
Saab

You bin there to

NO way a like to drive my car not fix it all the time

NO NO NO you were closer with the GM stuf

Now that would be special
but not in my E30

NO but your geting closer

NO. but it would sound good

OK how about I make it a new rear bumper
to the man or woman how gets it right.

OK then I will tell you
It's a

No that will be too easy
You have to guess
A gold star to the man or woman how gets it right.

No ford engine ford boxes
You can fit them to all most any engine you like
But I need one that will take about 200 bhp

no cossie
No that's bid dun but it got a turbo

it will still be a e30 but with a twist

HI there fuzzy not spoke be for
But I was wondering what gearbox and mount you used on the coswotth
Have an, I dear in mind but I will need a ford boxes
Any help info would be great
Thanks Steve

Also four got to say in side of tyre is worn away

I did wonder about the wheels as there a 3mm spacer and it only started yesterday put new brake pads in.
But the N/S is ok bid and had the wheel of at me mate and all seem ok
Not a thing out of place

not the wheel bearing it my be a bent strut

The front wheel keeps rubbing on the strut when I brake
And some time the car wonders for no reasons
Had a quick look when I got home but it to dark to see, any help would be gratefully received?

325se four door

Front Wishbone Rear Bush E30 325
how much me8 + p&p

For got to say 325se and I love it

Hi I only got my E30 about a 2 mouth a go, first BM two. With blown head gasket Had no probes doing the work my self all quit simple. I even re built the head. Found the part cheep as chip if you look around and can wait a day or two for deliver I think the most imported thing is to get one with as ...

Only last weekend got my head back form the shop so I started to put it All back nice and new. Vales re cut port clean lovely. Clean top of the block new gasket on, bolted up etc Finished bleeding the water starts up on the button. But there is a strange noise, so I have look can not see what it is ...

cheers for that me8
hop to get my head back for the weekend
so with a bit of luk be on the road buy monday
then it on to the interior and little body work
and she will look as good as new

Can some one tell me the correct torx settings for the head bolts?
On a 325i
Cheers Steve

got a pix

Search found 63 matches

Re: Good Value Good Condition 320i. not an advert

Re: E30zone dragstrip challenge.

Re: E30zone dragstrip challenge.

Re: E30zone dragstrip challenge.

Re: cosworth engine swap?

Re:

Re: Money Saving Motoring Tips!

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

Re: fuzzy ford gearbox

fuzzy ford gearbox

Re: Driver side front wheel rubs on strut at the top

Re: Driver side front wheel rubs on strut at the top

Re: Driver side front wheel rubs on strut at the top

Driver side front wheel rubs on strut at the top

Front Wishbone Rear Bush

Re: e30 tips needed

Re: e30 tips needed

Re: a little c**k up this afternoon

Re: Head Gasket

Head Gasket

Re: 325i Flat Fuse Prob.