E30 Zone

cheapest way would be buying my spare m42 lol, it is absolutly perfect and sounds it, only done 71k when a took it out ma e36 318is to do m50 swap, been in ma garage for a year now so 70 buck if ya collect it bud, pm for ma number if ya want it, ecu and all ancilleries included, inc gearbox but 3rd ...

cheer's guys

i read somewhere that disconnecting the water hoses on the throtle body and joining them together make the tb cooler as they they are to help it warm up in very cold weather is this correct? as i done this thinking it made sense as its never that cold here,, but i just read they are for cooling it r...

cool cool

is that the skid pan? is it open to the public on the rwyb days?

are you aloud to drift on those days? there is a chance of a few spin outs especially with the weather weve been getting

does anyone know of any drift meets in scotland? i am a beginer and would like to get some practise, empty car park just doesnt cut it sometimes, i reckon i got my car up to spec just need to put it into practise!

i got a full stainles system made up it just had a small wolfrace backbox with 2 outward rolled tips, i had to take it back after a few days, imagine nascar with that honda vtec angry wasp in a tin can sound constantly! got 2 silencers put in and it still sets off car alarms all in i spent 320 so i'...

i bought a 30quid chip off ebay it came from the states for a euro spec car, done exaclty what it said, raised rpm limit to 7000, removed fuel cut off on over run below 2000ish rpm, and the car sounds alot sharper, i reckon its a bit faster aswell, never had a rolling road done on it though and also...

cheers guys, another question, rolled arches-the small lip inside the arch about a thats about 1.5cm is just bent up so the arch has no lip, you know what i mean? and what is flaring the arches?

i have a pic up in the photo part of the forum with my white 325 with borbet a's 9in all round, but i'd go for 7.5 front 9 rear if i was gonna buy em again, 9's on the front are only legal with a stretched tyre otherwise the tread is too far past the arch, and it can be a hassle, i had to modify my ...

straight fit mate, i have a few speedo plugs lying around if yours doesnt fit, on the bright side your mileage wont go up!

ive just lowerd my car 60/60 and havent put my 9in wide borbets back on yet, its spax gas adjustable suspension and is very stiff, will it rub with me and a passenger? i dont expect anyone can go in the back. if anyone has got this could i see a pic to judge how close it will be? thanx guys

i just love my car and want the best for it i suppose, my girl thinks i'm totaly mental

i have got spax gas adjustable suspension -60mm, powerflex bushes-the eccentric type to sort the rear camber, front and rear whiteline adjustable antiroll bars, bmw short shift, high pres fuel regulator, chipped ecu, full stainless exhaust, and 9in borbets, and soon a 1.5way kaaz lsd, i dunno why i ...

has anyone got a kaaz lsd in there e30? i just bought one, any tips on fitting it, like does it need re-shimed for example? i'm a mechanic but i just dont want to knacker a 750 pound diff, i have orderd new bearings from bmw, i have already compared it to another stripped diff it seems like a perfec...

very pleased to see you got rid of the nasty k&n!! standard airbox all the way!

cheers guys!!

could any one tell who does a big bore throttle body for the 2.5 m20? i'm sure i seen one for around £70 months ago but i can't find them now (maybe i'm imagining it!), does any one have one? any difference? i've got a full ss exh, high pres. fuel regulator, and a chipped ecu, as i know sometimes th...

hows it for stiffness? any specific type of bilstein shock?

ah im using 205/45s f/r, what suspension u got? am looking to buy a kit soon

in the 5th pic down the arches look bigger, what kit is that? it isnt standard?

any rubbing at back? see ive got 9's o the front, i think i'm gonna go for 60 40 aswell, what set up you got?

is yours lowerd spook? how much?

cheers i think it needs lowered though

i posted a pic in photo gallery its ''my 325 on borbets'' if ya mana see it!

hey all i have been slowly tuning my 325i so far i've got a full system, high pressure fuel regulator, chipped ecu and a bmw short shift, i now want to lower it with a suspension or coilover kit, its sitting on 9in wide borbets all round which are coming off soon for winter, so i dont want more than...

have a look at http://cgi.ebay.com/ebaymotors/BMW-E30- ... QQtcZphoto what you think? any chance it would fit?

could anyone tell me if i buy a exhuast manifold from the states will it fit a right hand drive vehicle as our steering column is on the maifold side? as the yankees will have there LHD on the inlet side?? any ideas?

could anyone tell me if i buy a exhuast manifold from the states will it fit a right hand drive vehicle as our steering column is on the maifold side? as the yankees will have there LHD on the inlet side?? any ideas before i waste 250 on summat that wont fit?

its the outside, ive got stretched on the now, i'd say its as far as you could go really its pretty stretched, looks like iam gonna have to get themem rolled!

hey lee, am not sure.. they fit on fine though. is it on the rim itself, where borbet is stamped?

yea i was thinking maybe harder sporty suspension witha a drop would compensate a little bit? how much does rolling/flaring cost roughly? and do e30's have bump stops or anything like that, could bigger ones stop the arms going all the way up so the tyre doesnt contact the arch..

i recently got myself a set of perfect borbet a's 9 inch all round for my 325, my suspension is totaly standard, my problem is when ive just 1 person in the back and a go over a bump or dip about 50mph the arch screeches of the tyre at the back.. i'm concernd that it may bottom out and the arch will...

i just sold my 1994 volvo t-5 aswell mate, went cheap mostly cos it was auto and turbo smoked constantly, u will pay alot more for a manual than auto as there alot faster 0-60 but u can get em cheap at auctions cos the power of the engine pulling the huge weight actually starts to pull the front end...

Search found 56 matches

Re: M42 front end rattle, rebuilding guidlines for better en

Re: the two hoses on the throttle body?

the two hoses on the throttle body?

Re: does anyone know of a drift meets in scotland?

Re: does anyone know of a drift meets in scotland?

does anyone know of a drift meets in scotland?

Re:

Re: ecu chips ???

Re: is anyone running a 60mm drop with 9in wide wheels?

Re:

Re: Diff exchange question

is anyone running a 60mm drop with 9in wide wheels?

Re: Fitting a kaaz lsd

Re: Fitting a kaaz lsd

Fitting a kaaz lsd

Re:

Re: big bore throttle body? who sells them?

big bore throttle body? who sells them?

Re: my 325 on borbets

Re: my 325 on borbets

Re:

Re: my 325 on borbets

Re: my 325 on borbets

Re: my 325 on borbets

Re: any suspension ides?

my 325 on borbets

any suspension ides?

Re: American Exhaust manifolds??

American Exhaust manifolds??

American Exhaust manifolds??

Re: Borbet A troubles.. help!

Re: Borbet A troubles.. help!

Re: Borbet A troubles.. help!

Borbet A troubles.. help!

Re: 5 cylinder Volvo engined E30 project...