E30 Zone

had no luck gettin the correct part from gsf on sat so i had to make one

your a bloody star m8

thanks

ok cool cheers ed any idea on price cos im fairly skint at the mo lol deposit savin for a house init lol

cool so i need a pre face lif one then cheers m8

well there must be cos i cant seem to get one that fits ?? i heard something bout early e30s having a different shape floor plan??
because the mouting holes are over an inch out ??/

having probs locating a prop centre bearing for my early 323i we tried a 325 one but the mountin plate is different?? help please lol

chris

nice one m8 how do i tell the difference
ill be down soon for u to help me with my missing wires lol
chris

finally got me new 2.5 in but to my horror it was a buggered engine so after another day of fun got the new enine in that i test drove before they took it out :D set up consists of 2.5i standard 2.5 box wit the 2.3 diff only thing is now is i cant put any power on the floor :cool: which is fun but w...

so the 2.5 is in and running lol got a few probs now tho no mpg meter any more,heaters only hot on tick over lol an a big exhaust blow, oh and its quite hesitent off the mark has kinda a misfire before it revs up?? think a trip down to ants is in need for the wiring issues winkeye had to run a new w...

lol got engine bolted in mark but still have no pin out data for the c101 plug

now bout to sort exhaust and oil cooler!!!!
as for the strangeness between block an head who knows maybe a compression test will bring up somethinging ??????

hey there got the engine in and bolted up last night but am in need of some pin out data for the c101 plug to my early 323 loom???
has any one got it i know ants got it but cant get hold of him at the mo and really wanna get it finished now

rgds
chris

finally fixed it timing had to time it tooth on the dizzy and it wont run on factory marks the dizzy had to be bout quarter of a turn out lol but she runs so im a happy man again
cheers for the info daimlerman
rgds
chris

hey done what daimler man said but still no joy is there anything else that would stop her starting
ive got fuel spark and air but all i can get it to do is backfire up the inlet mani ????

hey there ive done these in situe but never again! my local garage only charges 80 quid to do em so i never gunna fuck about wit them again lol

has any one got any info on what i should be getting at the two wires going to dizzy

ok good thnx for the info think i gunna hav to get some help as ive had the arm pointing at about 9 oclock on the dizzy and the bottom pully at tdc an yet she still wont fire?? i then put the old dizzy back on to see if it would make any difference but it sill wont bloody start? bloody thing is piss...

u say the govener but mine has not got a govener arm its jus a standard one which way does the arm point? can the jack sharf pully move even with the cambelt on ?
rgds
chris

hey i jus tried changing the dizzy on my 1983 323 but i cant seem to get the timing right to get her to start now! has any one got diagrams of where the timming marks are for the dizzy and where the bottom pulley needs to be ????

rgds
chris

the wheels only had new tires an balanced bout 300 miles ago its well strange

ya think im unsure it does it on perfect roads too it done my head in on my 100 mile trip home from kent earlier lol

hey there
jus done rear beam bushes and now when i get over 60 mph the rear end seems to judder like a biatch lol
im pretty sure the wheels and tires are ok!
is there anything else that could cause this ???

rgds
chris

cool cheers m8 when the beems properly off ill give it some oxy set lol but as the cars bee set on fire wne i got a plate welded in the inner rear arch im abit dubious about fire lmao

my local garage said 80 but need them done asap for me mot retest!
i tried again today an they are stuck fast so i have managed to get another subframe with no bushes in for 50 quid so gunna go for that!

also maybe a bad earth some where ? or faulty ignition switch but more likly earth or alternator or starter
you can get altonators and starters tested at a local auto electricians !!

well i had similer probs on my old 320i n it turned out to be a drain from the starter motor! was very random too some days it would be fine others it would be a lil bitch! how did this all come about any simptoms b4 ?

doe the bat go flat ????

hey jus wondering what i have to take off to do em???
there both totally seazed in the rear beam + the middles are deazed on the bolt it it jus a case of brute force heat an alot of sweat lol!
there really staren to peee me offf now lol!!

cheers peeps
chris

cheers m8 much appreacheated

nice wheels, but i dont like your centre caps... post them to me and i will dispose of them for you..

some how i dought thats going to happen LMAO

yer m8 shouldnt be a prob m8
wot u think in the seats i put in

some new piccys of how im getting on the leather is in new wheels on welding is nearly done lol what ya think so far http://i138.photobucket.com/albums/q266/cdtautos/05122007249.jpg http://i138.photobucket.com/albums/q266/cdtautos/05122007248.jpg http://i138.photobucket.com/albums/q266/cdtautos/0512...

i got one on a a reg is A323 UUU plate is from first registration

put the 323 for mot today was not happy with the result
suprise its welding lol
so booked it in wit a local body shop to have new floor sills (inner and outer) and what ever else is needed!

wish i wernt attatched to the old girl this is gunna seriously rape the bank lol

lol jus been lookin at ms and different turbos as well tryin to work out the best set up for my drivin style (drive it like ya stole it lol)
im about tomoz if ya fancy a cup pf tea

wit me old golf
will get some decent photos tomow if the weathers good
still need exhaust to get it through mot

Search found 43 matches

Re: prop centre bearing

Re: prop centre bearing

Re: prop centre bearing

Re: prop centre bearing

Re: prop centre bearing

prop centre bearing

Re: 2.5 convers

2.5 convers

Re: help i cant get my 323 to start

Re: help i cant get my 323 to start

2.5i motronic into early 2.3i

Re: help i cant get my 323 to start

Re: help i cant get my 323 to start

Re: Rear subframe bushes

Re: help i cant get my 323 to start

Re: help i cant get my 323 to start

Re: help i cant get my 323 to start

fixed but now onto bigger an better things (2.5bolted in)

Re: juddering from the rear over 60mph!!

Re: juddering from the rear over 60mph!!

juddering from the rear over 60mph!!

Re: rear beam bushes!!!!

Re: rear beam bushes!!!!

Re: Electrical Power loss

Re: Electrical Power loss

Re: Electrical Power loss

rear beam bushes!!!!

Re:

Re:

Re:

Re: How many 323's on the zone ?

mot was today

Re: my 323i

Re: my 323i