E30 Zone

Have you got a gearbox cross member for sale by any chance

What parts you got and how much for them dan

Anyone got a M40/m42
Sump,oil pickup pipe,oil dipstick and tube.
Both engine mounts.
Just picked up a m44 to put in my e30 project so after any parts to help fit motor.
Would also consider buying a complete engine.

Jim320i wrote:By the off chance you in Leicester... I have 2 good sets available

no jim i live just outside cardiff mate thanks for offer

think i mite price up copper cos ive owned my e30 for about 10 years and i just cant ever see me selling it.

sorry for messing up first time.
what i need to know is if copper pipe is ok to carry fuel or is it best to just buy new bmw fuel pipes ?

well after mothballing my baby up for the past two years i decided to start making a to do list.
my first question is wots best copper or steel for the fuel lines that run the length of the car?

anyone know suppliers of fibreglass panels eg.wings,bonnet,bootlid and standard bumpers.before i start looking into making my own.

has anyone used a glaser headgasket and headbolts.prised up bmw parts £260 crazy price so have to find alternative brand .but dont wont to buy rubbish

so i guess ecp is ok for headgasket kit aslong as thay are elring or reinz. just got to sort head bolts out.thanks for advise everyone

i need to remove my m20 2.5 head to repair snapped exhaust manifold bolts.so wot headgasket is best bmw or aftermarket(europarts).anyone used glaser head bolts ?

no just swap the in tank fuel pump and sender unit complete from a m20 2.5 as this will have a return pipe allready fitted

your best option is to use etch primer on bumper as it eats into metal/plastic to give good base for paint to stick to

so its decision time then do i drill or stick .thanks for all your help and ideas

does anyone now if theres a template avalible for drilling the fixture holes in the sills so i can fit my touring sideskirts.ow yes forgot to say these are genuine bmw ones.

wot parts are wrong cos im thinking of same conversion.dont wont to waist my money on useless parts

yes i read that e36 318ti compact trailing arms will fit.and e36 front struts with adjustable top mount to set correct wheel camber.

i cleaned mine over a year ago with brake cleaner icv still working fine

pull out relay k7 and link across pins 30 and 87 of its base with piece of wire . if this makes heater fan work then investigate wire to starter motor .black/green wire with 8mm electrical connecter

thanks brian i will have a look tomorrow and test sensor

just bought 1991 525 to fit m50 into my e30 .only fault with 525 is dash displaying coolant level low.checked rad and levels fine .is there a water level sensor fitted to this vehicle

if you are fitting later ecu and engine harness of a plastic bumper model onto an early chrome bumper model then there are wiring diferences between harness sockets . fitting engine harness and crank sensar bracket / trigger wheel can all be done with engine in place

got mine from opie oils last summer.had discount for being e30zone member.cost me 32.98 for 2litres

there is a small hole in o/s grill next to highbeam lamp .push long flathead screwdriver into hole and turn this should open bonnet.good luck

had a go of opening bonnet today and found two catches holding bonnet down.so pulled one part of kidney grill off and pushed o/s catch over to the left and bonnet opend .e36 is different setup to e30.i can now start m50 conversion .

cheers mate i will try tomorrow.

bought e36 325i 1993 for m50 conversion. bonnet cable snapped. anybody know how to open bonnet.

ratios for sports box are 1st=3.35 2nd=2.03 3rd=1.36 4th=1.00 and 5th=0.81 hope that helps mate

yes you can fit b20 head onto b25 . i read in bmw mag that b20 gives better flow rating than b25 something about port sizes if i remember right

have you checked for leaking injecters or intake manifold gasket faults .

just got new m.o.t on saturday so count me in

anyone know what box this is please 005141 hm i ve been told its a sports box

so would the 2.5 sport flywheel be the same as well

anyone know if an m20 2.0 flywheel is different to a m20 2.5 flywheel

where are the codes found .i can only see raised numbers under the getrag writing

thanks for information jazzman i will check website out to

Search found 47 matches

Re: Bmw e30 m40 engine parts for sale

Re: M40/m42 sump

M40/m42 sump

Re: fuel pipes

Re: fuel pipes

fuel pipes

fibreglass front wings

glaser headgasket ?

Re: bmw headgasket or aftermarket

bmw headgasket or aftermarket

Re: 6 pot into 318i fueling Q

Re: MTEC kit Painting and fiiting problems

Re: fitting kit for sideskirts

fitting kit for sideskirts

Re:

Re:

Re: Can I clean the idle control valve with brake/carb clean

Re: car wont start

Re: coolent temp sensor

coolent temp sensor

Re: Late Engine management on an early car.

Re:

Re: BONNET STUCK

Re: bonnet cable snapped - HELP

Re: bonnet cable snapped - HELP

bonnet cable snapped - HELP

Re: 325i sport gearbox

Re: Just started running lumpy & tappy M20 like a tracto

Re: engine noise ( with vid ) help

Re: Ultimate BMW show / Santapod 21-09-08

Re: 325 Sport gearbox help

Re: m20 flywheels

m20 flywheels

Re: 325 Sport gearbox help

Re: what lsd oil