E30 Zone

Thank's, that's great.

Can i use the original clutch master cylinder on my e30. If fitting a e36 m3 evo engine with 6 spd gearbox. Will the clutch work properly.

Yes it has been done, i've got a red top turbo in my e30, every thing will have to be a one off.if you can weld that will help loads. The main thing you have to consider is, how much you want to spend, i cut the spend to a tight budget, did not need to go dry sump route, so i removed the heater syst...

Can i use the standard front top mounts on a set of rpm coilovers.

911 every single time.

I did forget to mention that i have only the shell of the dash, all i have is the blue plug and white plug that conects to the back of the dash nothing else, that's why i'm trying to find the feed to the warning light's from those plug's.

Thank you sir, i will now study it and see what i can do as i'm not an electrician at all.

Ok, i've fitted a stack display unit into the shell of my e30 dashboard,to replace all the standard gauge's, now as its a road car i do need the warning light's for the indecators, main beam, side light's handbrake ect, how would i go about wireing in the dash warning light's, i have fitted led ligh...

Thanks willnz,will rewire it so it operates as normal.

Hi guy's. I have fitted a c20let from a vauxhall into my 318i e30, wired the engine in like this, used the c101 to power the engine, conection no 18, black/yellow to starter, the problem i have is the engine runs but will not turn off using the key, it will start with the key. I have used the pos fr...

Sounds over complex realy, so thanks but no thanks then,cheers.

Any more news on this mighty bmw

Sorry, i do mean the dash cluster.

Is it possible to fit a standard e30 dash or a e36, e46, m3 dash in to a non bmw car.

Very nice, please more.

Very nice, please more.

Wishing you all a merry christmas.

Nice car and welcome.

Nice car and welcome.

Info on the digital display in the vent glenn looks brill.

As your gonna upgrade the front/ rear anti-roll bars don't forget to reinforce the rear mounting's that are on the boot floor as such because the can and do split from the floor, iv'e welded a L shaped 1/4" plate to it job done.

Yes i have a small video on my phone but don't have time to sort out photo shop or whatever it is to get pick's or vids on this sight, i could send someone the vid from my htc phone and they could put it up for me.

Changed loom feed to switched live and put a switch in the mix so i can use it as a immobalizer as i have two cars stolen before and all is great now runs lovely.

Yea gonna change the black wire that powers the loom to switched live instead of constant feed.

Ecu powerd from battery and a little black wire that power's the loom (not sure if it should be constant or switched live) to feed the loom, starts from the key but does not turn off.

Fitted my vauxhall turbo engine in my e30, turn the key she runs but cant turn engine off. Have fitted a battery isolation switch turned that off still runs turned key off still runs, had to pull conection off the coil to stop it, any idea's guys. The only wire i've used on the bmw c101 is the black...

On my e30 their is a black round connection that is for the engine (engine harness) coming out of the fuse box that you twist to separate when taking engine out, as i'm fitting a engine from a differant car and separate this engine harness can i usethe black and yellow to power the starter and do i ...

Thanks grrrmachine, vauxhall have the same set up so no problem their.

Just wondering were to get starter feed from as i have fitted a vauxhall turbo engine, would like to use the key to start as if it was the original engine ect and a constant live for the ecu, should the starter go through a relay to be safe.

No just been looking page by page, the hard way lol.

Been looking on tech help, would like wiring diagram (both sides) for the c101 ,e30, and what they do from the fuse box tothe c101 in engine bay please.

Good thought.

Many thanks.

Were can i buy a bosch fuel pump (intank) for a decent price for my 318i e30.

Thanks that is perfect.

Search found 309 matches

Re: clutch master cylinder

clutch master cylinder

Re: Red top conversion?

rpm coilovers

Re:

Re: dash warning lights

Re: dash warning lights

dash warning lights

Re: fitted different engine

fitted different engine

Re: bmw dash

Re:

Re: bmw dash

bmw dash

Re: Old Classic TVR with S50B32

Re: Old Classic TVR with S50B32

merry christmas

Re: New member

Re: New member

Re:

Re: Lemforder ford rear drop links

Re: well it runs but

Re: well it runs but

Re: well it runs but

Re: well it runs but

well it runs but

fuse box wires

Re: c101 wiring

Re: c101 wiring

Re: c101 wiring

c101 wiring

Re: fuel pump

Re: fuel pump

fuel pump

Re: fuel pump relay