E30 Zone

Yea that's a good idea, simple is always best and then you can change it once you are using it as and when you need to, I done my car abit arse about face, I built my car as a track day car, I made my own suspension, custom rear axle and all that jazz, so she handled amazing, then needed more power ...

Hi there bud, that's looking real nice,
I've not long completed my s54 conversion and I must say it was a task to make everything nice, neat and strong
Where are you based?
What kind of power are you expecting?
How come you are using a standard ecu?

Ashley E795MWP

oh i forgot to mention i already have a 6-branch and full stainless on her

hi all

i want more power from my m20b25 and am thinking of the cam road but dont know what route to take and who to take it with.

any info on this will be of great help thank you!

thank you both for your help

i recently bought another nice lil e30 which the nice lil man said had been converted to a 325 from 320 but the problem is somedays it seems to pull like a 2.5 and otherdays i doubt it is more then a 2.0, how can i identifiy if its a 2.5 or 2.0ltr? it has a 6 branch manifold on it and a full stainle...

can anyone help me with my faulty rev gauge?

it does'nt work at all!!!!

many thanks Ashley

does anyone no how to set up the fuel and air mix?

many thanks Ashley

can anyone give me a tip or two on how to mask up the outside rim of my wheels so that i leave the rim silver?

many thanks Ashley!

many thanks to everyone for the info but ive now decided to go for the standard 2.5 lump

Cheers anyway Ashley

will the 325 pistons fit properly and will it give me a good enought power increase to bother?

cheers Ashley

Hi all,
ive heard that if i mate my 87 325 head with a 2.7 eta block it will have some nice figure's. is this right and if so does anyone know what i could be looking at figure wise?

many thanks Ashley.

: Jesus 2: Ziggy 3: Rosc0 Nath 4: johnl320 5: Jon-BMW 6: ivqii 7:Driftboy (possibility) 8:Goortour (possibility) 9:Dazleeds (possibility) 10:Braedbin (possibility in some French junk!) 11:Hairyscreech 12:Nemo (Thinking about it) 13:Casper (trying to make it) 14 jonb, tomson and cousin ben, + da bwad...

also cant hear the fuel pump at all!!!

many thanks

Ashley

hi Again brian.

Everything is done but she still wont start. ive took the fuel line off and there is no fuel getting through!

Any Ideas? ? ? ? ?

Sorry brian i missread what you wrote.

im now in the process of changing the loom. will update shortly

many thanks

Ashley

Hi again Brian. ive now done the engine swap and its not running? the starter doesn't turn over at all, no clicks or nothing! there is a black ten pin plug under the steering that no longer has anything to connect to as well as a white three pin plug that no longer has nothing to connect to. any ide...

brilliant thanks!

Do i need to change the motronic unit thing under my steering wheel as the plugs to connect to it is different?

i really appreciate this as my car has now been off the road for about 3 weeks and im starting to mis it really bad! ! !

Brian i have a similar problem! :? i have a pre face lift 87 325i manual and i want to put the engine and gearbox in my auto face lift 90 325 sport as the head has gone on the sport. i have had a look and i think i need to change the inlet manifolds over as the plugs are different, OR should i chang...

I deciced to change my engine and box over from my E reg 1987 325i manual in to my G reg 1990 325i tech2 auto bcoz my head was badly gone. I have nearly finished now but i have incountered a couple of proplems ............ http://img512.imageshack.us/img512/8172/abcd0002bd5.th.jpg [URL=http://img88....

ive change my engine and trans over from my 1987 325i manual into my 1990 325i sport tech2 auto but ive encountered a problem or two!

the starter motor on the 87 engine has only 2 wires and my sport has 3, wat do i do?

I have my 325i sport tech2 auto and i have just bought a 325i but a pre facelift model E reg (88 i think) i want to change the engine over from the standard to the sport. is there much i need to change or is this straight forward? im also wanting to change the auto box to the manual box, how hard is...

1. bss325i tech2 Sport (now has ITG and soon a BTB)
2.Sparx 318is
3. daimlerman
4. Jam172 E28 528i
5. Andyb (forum5)
6. Sharky (forum5)
7. Toby Unna
8. sideways_king (e30 325i tech2 sport)
9.
10.
11.
12.......

they are 15's

thanks to everyone for your comments about her! :D it helps get rid of all doubts in my mind that shes not worth it. im now in the process of getting rid of the little rust she has and also im trying to sorce 3 centercaps for her. if anyone can help with that it would be greatly appreciated many tha...

John Emsworth. I so wish id never sold it back to ya bud, 1 of the best cars i have ever had ( Gutted I Am ) Let me no when youve finished the work on it we can talk CASH $$$$$$$$$

SORRY ppl but does anyone no where i can get the engine mounts needed as i dont have the confidence to fabricate some myself.

also do you need to make any modifications to the fire wall?

many thanks again Ashley

Thanks to everyone that has given me info on turboing my 325i but i have decided to 335i my baby as i have just brought a E34 535i manual! so anyone that has done/doing this could you enlighten me how i would go about wiring the ecu and will all my instruments still work e.g. trip comp and so on man...

Here is my pride and joy 325i M-tec sport I hope you like it as much as i do http://i230.photobucket.com/albums/ee126/sideways_king/M-tec008Medium.jpg http://i230.photobucket.com/albums/ee126/sideways_king/M-tec011Medium.jpg http://i230.photobucket.com/albums/ee126/sideways_king/M-tec013Medium.jpg h...

ric325i Sorry im new to all this, who is ant? the thing is i dont no where to start looking! i would really appricate it if you could tell me a few sites i could look at that tells me about turboing a 325 and how much it roughly cost's as for the manual box ive just got back from the scrapy 100yds f...

mattG no its not a second car, its my only car! im using the works motor at the moment but i dont think i can stand much more of it. i can keep her off the road if needed though. i am on abit of a budget but it is possible to push the boat out if its worth it. so how do i go about doing a turbo conv...

i have a 325i sport m-tec II auto and the head gasket has now gone :cry: ive been thinking of rather then doing the head gasket maybe change the engine insted. but if im going to do an engine swap then maybe i should go for something abit more tasty. the only thing is i dont want to have to cut or w...

Search found 33 matches

Re:

Re:

Re:

Re: What Cams (HELP PLEASE)!!!

What Cams (HELP PLEASE)!!!

Re: how to identifiy what engine size

how to identifiy what engine size

rev gauge not working?????????

fuel and air mixture

masking up wheels

Re: 2.7 eta block

Re: 2.7 eta block

2.7 eta block

Re:

Re:

Re:

Re:

Re:

Re:

Re:

Problem with my engine swap! !

ergent help required

CAN ANYONE HELP? ? ? ?

Re: Rolling road day in Luton, Late November/early December

Re:

Re:

Re: My pride and joy 325i M-tec sport

Re: CAN ANYONE HELP ME PLEASE! ! !

Re: CAN ANYONE HELP ME PLEASE! ! !

My pride and joy 325i M-tec sport

Re: CAN ANYONE HELP ME PLEASE! ! !

Re: CAN ANYONE HELP ME PLEASE! ! !

CAN ANYONE HELP ME PLEASE! ! !