E30 Zone

csl wrote:.....only one more thing and thats your 3 for today.

That'll be the woman finding out who scraped her bumper ...

Thanks for that - good advice. Has anyone had any success refilling the system ? I would imagine it's not as easy as it sounds, and I'm still unsure how it would work, there must be some pressure in the system if the strength of the return springs is anything to go by. I seem t remember in conversa...

Ziggy wrote:We're both well, although she's getting rather large!

I guess by that comment your going to be a dad! Large & Hannah don't usually go together in the same sentence, unless she's let her self go now she's got a ring on her finger.

Cheers Mark! See if it sells, but I'll have it if it's going to end up in the bin... not sure how long I might be waiting for the 'correct' one... It's been off the road about a year now! :( Its yours if you want it, I can drop it off at your Mums if your coming down this way soon if were not in. H...

RealOEM shows the looms to be the same across all of the models, but they list different looms depending on the year of the car.

http://www.realoem.lv/showparts.php?lan ... 263&gear=M

No idea what the differences are.

Hi Jon, If you want i have a complete uncut loom from a '89 touring 325 (Shame Brian mentioned they are not the best loom to start with!)

I've listed it on ebay this afternoon, but it's yours if you want it, otherwise I'll weigh it in

TheHeap wrote:^ I replaced a power steering pump on one of these. What a funny set up that was. ^

I replaced the PAS pump on this one too! PITA job or what! dismantle half the van first... damn expensive part too!

I've been away playing with my other money pit for a while, E30 back on the road soon!

For example- m40 or m42 box = m20 spigot bearing (12mm hole) Not quite! the spigot bearings changed in the m42 etc in sept '90, can't remember the sizes at the mo, but I remember when i changed the engine in my 318iS I had to change the spigot bearing because I was using a slightly different year e...

It's still taxed! The enquiry is complete The vehicle details for K786 LMD are: Date of Liability 01 11 2010 Date of First Registration 08 08 1992 Year of Manufacture 1992 Cylinder Capacity (cc) 2494CC CO2 Emissions Not Available Fuel Type Petrol Export Marker Not Applicable Vehicle Status Licence N...

Make sure the release handle inside the car has returned back to its proper position.

Hi chaps, thought I'd better show my face...

Link to hotel says no rooms available

My customers think i'm anal over parts of the work i do for them, but you sir win the prize

1 . gaszman 2. gc318 3. Essexgirlracer 4. TPS 5. March109 6. Gortour 7. HartgeH27 8. Ziggy 9. D6DPH 10. dips 11. Steve (maybe, just maybe in my E30 ) 12. MARKYMARKY 13. Dan325iSport - someone's got to look after Dave 14. Tel E30 M3 15. e301988325i - happily help out 16 .corkie 17. priddie 18. bigand...

Depends, if it's a second car, garaged, your over 25 etc etc

Basically the car qualifies, but do you!

Not an MOT failure, but it's best to get it sorted before it spreads.

Try scrubbing at it with 'scotch bright' or if you can get them Vileda active wave sponge

About £80 i think

Better let the Cotswolds chaps confirm!

If it's the metal filler neck you'd better sit down

Bo!!ocks, i thought this was Sunday, I'm sooo sorry just realised the 10th is today.

I've been sorting my old T4 out for someone to view it today, but as usual neither buyers have turned up!

Fair amount of work to upgrade chrome to plastic bumpers. At the front you will need new front valance At the back you'll need to modify the rear bumper as the rear arches are a different shape on your chromie. To fit facelift rear lights you either need to replace or modify the back panel, and modi...

They just pop out, then you need a T55 torx bit and some luck to remove the bolts.

Geoff emailed me back saying FWD will be OK, height should be OK!

See you there

I used to get 380 / 400miles from a tank in mine.

Double check there are no fuel leaks from the hoses that run between the inlet manifold.

I've sent them an email asking anyway.

Been swapping all my tools over to the new van, been at it all day, still need another day to fettle with the shelving.

http://www.reworx.com/services.htm

It's only 2 wheel dyno, plus they say they only do rear wheel drive, if that's true then I'm out

Will have to ring them to confirm.

Right down the road from me...

ho ho ho, you really do love yourself!

Bet your Mum thinks your special.

Accelerate slightly quicker, reduce top speed and reduce economy

Compare it to under the bonnet in the boot etc, somewhere where it hasn't been repainted.

Diamond black does have a fair amount of pink in it...

Excellent, get the van back from the body-shop tomorrow, I assume there aren't too many height restrictions in there??? My van is approx 2M high.

10th

http://www.bilthamber.com/autobalm.html

Just ordered a kit from them yesterday, they make some excellent products, it's worth while going through their website.

As Cotswolds are now closed for the weekend, I'll butt in.

As yours is a plastic bumper model, then it's 2 pieces on the front, and 3 on the back. Budget about £25 to £30 each piece. Although it's been a few years since i bought any.

I thought it was compulsory to own a Ute in Oz, (just realised your in NZ...)

I loved my old convertible for the same reason, roof down and you can fit in sooooo much stuff, once had a Land Rover Series 2a bulkhead in the back of mine, stuck out so far it was like an air brake.

Search found 3744 matches

Re: A frustrating day...

Re: pneumatic headlamp adjusters.

Re: Swapping a fusebox/loom...!

Re: Swapping a fusebox/loom...!

Re: 320i touring ABS loom same as 325i sport ABS loom?

Re: Swapping a fusebox/loom...!

Re:

Re:

Re: Does this car belong to a zoner?

Re: Bonnet catch not working - HELP!

Re: The German Show Accommodation (Big discount)

Re:

Re: Classic Insurance

Re: another mot question

Re: Over spray on door seals

Re: fuel filler neck for 325i ?

Re: fuel filler neck for 325i ?

Re: dyno day southern (portsmouth) october

Re: Old/new bumpers info+electrical issue

Re: Help - Tech 2 Rear Bumper Fitting Advice

Re: dyno day southern (portsmouth) october

Re: MPG ... 318i

Re: dyno day southern (portsmouth) october

Re: dyno day southern (portsmouth) october

Re: m3 barn find anyone~??

Re: This forum just loves the bangers

Re: 4.1 diff

Re: 181 diamond black paint

Re: dyno day southern (portsmouth) october

Re: dyno day southern (portsmouth) october

Re: Amazing

Re: FRONT AND REAR OEM BMW E30 BUMPER TRIMS

Re: Who needs a pickup when you have a vert..