E30 Zone

I've done it, and it took me a couple of hours, the longest part was the placement of the switches.

I've got 2 switches, one for accessory, one for ignition, and a button for the starter. i found a good diagram somewhere on teh web, try searching google images.

ok thanks

Yeah it has an o2 Sensor, i connected it into teh ecu harness, im just wondering where the interferance is coming from? Brianmooore, is that because it is a narrowband sensor yes?

Bump....

Hi, I just bought an Air/Fuel gauge from supercheap, goes very well withteh cars lighting scheme. Got all the wires connected bar one, the o2 signal wire. from what ive read on the net, on a motronic 1.0 car, ecu pin 24 is the o2 connector. so i jam it in and plug it all up, and the gauge acts quite...

Heres some Aussie Talent :D http://img266.imageshack.us/img266/7427/imgp2925copysl5.jpg http://img144.imageshack.us/img144/8691/dsc00378lb5.jpg http://img98.imageshack.us/img98/8831/dsc00385xf3.jpg http://img98.imageshack.us/img98/7897/dsc00461qj2.jpg It so badly needs an mtech 1 kit, but they are s...

About Time Too...

Just Got My Car Finished Today, Goes Damn Fine.

731 Head
323 Intake Manifold
Eta Bottom

Videos and Pics Coming Tomorrow...

P.S.....still need help with a 2.7 chip

Ant, do you think you could supply me with a chip?..im having a similar problem...ive sent u an email before, but with no reply.

mine is by far the worst...as with my fellow aussie...the sunburnt country..havent got pics..but i managed to fill the cracks with plaster filler

...and paint over it..looks ok...cracks still visible..but doesnt look poverty now.

Hold on...why am i removing the crank?

400ft/lb

..holy moley!!....might have some trouble with my little 3" wrench

...

Polaris Silver ;)

Thanks for your help, just checked the oil and it seems okay, its not a switchable auto, so ill get the torque converter and the other thing checked tomorrow.

thanks again

My 86 eta has an auto box, and it wont engage into 4th gear. During highway driving, when it is supposed to change to 4th, it seems as though its in neutral, as there is no load on the engine when coasting at high speeds, also, when I put my foot down the revs go higher, but the car does not change ...

Ok, well I've gotten myself an 84 323i that i can pillage for parts, and have already removed the head and intake. I've also got receipts saying that the whole engine was rebuilt less than 2k ago. Now comes the part i'm worried about, tearing apart my eta and bolting up the 323i head. Can those of y...

any volunteers to do a you tube educational vid

For EVER

:O..i just went out and tried it..lol...didnt believe you..you learn something new every day

oh and why not to use the m30 afm, ive had it on b4 with swapped internals and it seemd to work fine, idle was a little bit funky but apart from that it was prety sweet, also helps me bolt on the huge cone filter and the heat shield i made.

ok thanks for your help fellas

...im in sydney, so it'd be great if your in the area, all i need from ant is the chip, how do i go about ordering one?

alright, here is what i have got so far 323i head 731 cast 323i intake manifold and TB M30 AFM and a set of Falcon Injectors. Ant, will your chip work fine with the existing engine management?, and how much are we looking at shipped to Aus? Should be going together soon so ill see how it goes, teh h...

ok...ill see what i can do

any ideas what injectors i shuld use?

but the intake pots on the 323i head are different to the 325i one, wont the 323i head need work to correctly mate with the 325i intake?

ok ok....its all about cost though...ant does ur chip work with the eta dme box?

why is it scary?..still run ok?

omg

...jsut shoved my lights in the kitchen sink with HOT HOT water, and lens cracked. bloody hell, oh well good excuse to go get a pair of smileys

so there is no way it will run with a standard 325i dme?

Hey guys, looking to build up a 327i using my eta block as a base.

Wanting to run the 323i head, Intake and throttle body.
Along with 325i ecu.

Im pretty sure the mechanics will work together fine, jsut wondering if the 325i ecu is capable of running it.

anyone done this build?

stops the car from starting when not in park or neutral..i think.

i get the same problem sometimes..really annoying when ur out somewhere....turn the key and nothing happens, all you can hear is a little buzzing from under the car, happened to me today, after having the car turned to accessory for about 20 mins, and radio on. turned key, no go, got out walked arou...

Search found 30 matches

Re: ignition switch and start button?

Re: AFR Gauge o2 Sensor

Re: AFR Gauge o2 Sensor

Re: AFR Gauge o2 Sensor

AFR Gauge o2 Sensor

2.7 Finished :D

Re: 2.7 stroker running problem

Re: Dashboard Cracks

Re: Starting the 2.7

Re: Starting the 2.7

Re: Classic BMW Colours

Re: 4th Gear????

4th Gear????

Starting the 2.7

Re: how long will an m20......

Re: how long will an m20......

Re:

Re: 327i help

Re: 327i help

Re: 327i help

Re: 327i help

Re: 327i help

Re: 327i help

Re: 327i help

Re:

Re: 327i help

327i help

Re:

Re: Car will not start sometimes