E30 Zone

oh thanks for the reply.... i didn't use it but somehow i can feel the vibration when a/c system. i think it would be better if i connect it.

Hie Mate, I'm having E30 94' E34 M50b25 without EWS with A/C system. as we know there are 3 wires " pin 4 , 5 , 6" is for A/C. if i would like to connect the A/C signal wire onto the ECU to increase engine RPM during the A/C functioning. May i know which pin to connect from E30 2 pin connector (unde...

Is there anyone out there have this smoke headlamp template ???

i will buy from you.. pls PM me. thank you.

my brown sender is taken off my 1992 m20 325i . its a single pin sendor.

anyway i will try to get another to try it out.

thanks alot mate

yes i've tried shorting the pin 4 to the ground.
my temperature gauge goes to Maximum...

in this case would be my temperature sender is faulty ??

hie eko,

i think the tms rack stop quite useful.

i will fabricate one pair and give it a try.

thanks for the infos..

I'm Using all round Bilstein B8 + Eibach Prokit spring.

should i use 205/45/R16 ?? or convert to 5 lugs ?

toe has been adjusted, but when i turning to full lock. wheel just rubbing the chassis.

Hello Guys,

I've install E36 95' 318iS steering rack onto my e30.

i'm using 205/50/R16 ET25 AC type 1 wheel.

I've noticed when doing the full turn,

the tire just rubbing the wheel house chassis.

Any Solution for this ?

I'm using 94' 525i M50B25TU Maroon label 413 ECU without EWS.

E34 engine wiring loom - Pin 12 (brown/violet) -> E30 body - Pin 4 (Brown/violet)

I've just installed E36 95' 318iS steering rack onto my e30.

i'm using 205/50/R16 ET25 AC type 1 wheel.

I've noticed when i'm doing the full turn,

the tire just rubbing the wheel house chassis.

Anyone has encountered this ?

today i;ve replacced the m50 black sender with m20 brown sender.
its seems my temperature gauge still not works.

i notice m50 temp sender is 2 pin, m20 temp sender is only 1 pin.

all right. thank you

allright thanks.

E30BeemerLad wrote:
daniele30 wrote:brown sender from E30, how about e36 ? which sender should we remove ?

some say black, some say blue . which one mate ?
Blue = ECU

Black on the E36 is removed and replaced with brown sensor from E30

Thanks alot Beemerlad !

what engine mounting are u using ?
i'm facing the same problem but i think by using m20 engine mounting should be no problem.
or u just need to wrap the wiring & hang on the m20 325i bracket...

the m50 wiring box just blocking ... sigh

brown sender from E30, how about e36 ? which sender should we remove ?

some say black, some say blue . which one mate ?

finally, i've sorted out the problem.
well, the breaker supply a wrong part to me.

found out it was from m43.

i encountered on problem during my engine conversion. i'm using e34 525i complete engine. as usual, using e36 alloy engine arm. i've converted e36 steering. it seems that the power steering pump Inlet & Outlet was different with E34 power steering pump The e36 325i steering rack hoses vice versa wit...

which temp sender on m50 should i remove?

the black one or the blue one ?

i wonder if you use the welded steering coupling, would it be too harsh for the steering wheel when driving on some uneven road ?

DanThe,

Do i still need to cut the rear m52 exhaust manifold if i use the steering coupling as posted by you ?

Is there anybody know what is the roughly weight distribution for E30 with M50 engine ??

E30 M3, E34 aircon, E36 aircon, or any number of fans from other makes. The choice is yours. you mean the electric fan which install on the Condensor side ?? how about the radiator side ?? use back the fan clutch ??? my car have 2 fans, 1 fan clutch attached to water pump, another 1 is at the air c...

May i know frmo which model Electric Fan should i use for e30 m50 conversion ?

i'm using bilstein b6 & eibach prokit, 325i front & rear brakes, e32 servo + mc .

i need to replace fuel tank, retrofit fuel pump wiring & fuel piping.

Hie dude,

I'm driving a 1988 E30 316 m10b18 caburetor.

i'm planning to put in M52b28 engine.

Was it too hard to proceed with this ?

anyone can shed some light on me ?

Thanks

Anyone out there know how to replace the soft top rear plastic window ????

Hie dude,

May i know issit possible to transfer the LSD unit from 3.73lsd to 2.93open diff ?

i would like to make my 2.93 open difff become an LSD.

anyone have experience on this ??

Your info are highly appreciated.

Thanks alot.

Daniel

ok will try to search n see.. thanks alot mate

hie dude,

i wonder is there anyone having E30 M3 body shell for 1:10 scale Nitro RC car ???

I'm looking for one but just couldn't find it.

i'm looking for bmw used part junkyard nearest to Malaysia . I'm going for bulk buy & ship to Malaysia... anyone can help ???

Helloo,

I'm looking for the UK junkyard address which selling mostly bmw or mercedes parts.

Hopefully someone able to help me here.

Thanks

Regards,
Daniel

yup i've remove the sun roof for cleaning & re-spray back.

by reading is really hard to remove the sun roof, i bet u didn't do it after reading this.... do u ???

WOuld like to know, do i really need an ABS system in order to make the vanos system works ??

my car is without ABS, but i heard some craps that i need ABS system in order to let the Single vanos work.

anyone can clarify this ???

Thanks

Search found 40 matches

Re: M50 A/C system wiring.

M50 A/C system wiring.

Re:

Re:

Re:

Re:

Re:

Re:

Re:

E36 Rack Conversion

Re:

Re:

Re: E30 M50 Weight Distribution

Re:

Re: m50 / hartge strut brace clearance

Re:

Re:

Re:

Re: M50 conversion and steering coupling

Re: M50 conversion and steering coupling

E30 M50 Weight Distribution

Re:

Re:

Re: 316 m10 carb Convert to M52b28

316 m10 carb Convert to M52b28

E30 1988/12 325i Cab

LSD conversion info

Re: E30 M3 RC Car

E30 M3 RC Car

Re:

BMW Junk Yard

Re: E30 Sunroof Conversion

Re: M50 engine conversion enquiry