E30 Zone

Hi can you suggest a repair kit for the prop shaft U/J?
Have e mailed reg No to you
cheers

Merry Christmas every body!

Trouble is if something catches fire you can put it out
but if the tank goes you loose the building !!!!

Try warming it up with a hair drier in case its been glued?

why thank you sir

Hi I seem to have started a lone thread which should be here !!!
pleasure doing business with eko

pleasure doing business with eko

Could try moving the shift lever (jiggle it) that will show up the selector switch if its dodgy

Hi Scott I got the Wheel as promised. Exellant!

No Probs Scott!

No point messing about with the tracking, you gotta get a full geo check to see whats wrong!
My mates e30 was 1degree different left to right we fond the chassis legs and crossmember had to be re-aligned on a body jig (His car used to self steer when a bump in the road was gone over)

Hi Scott dont forget to send me wheel when you can!

GSF sent the correct throtle cable today with no drama's
I've got to get refunds from Fairfeilds and Euro parts. I started to think no one made cables for the m10's any more!

had something similar for a few months pretty good wipers

boil the kettle and pour it over the centre then get someone else to kick like f### in case you get scalded

Check your charge rate you should get up to 14 volts at the battery engine at a fast tick over
is the head lamp unit moving slightly?

Brianmoooore wrote:
NayC wrote: for the head beams to get rid of that nasty yellow light.
Anyone who thinks H1 halogen lamps are yellow, obviously doesn't remember 45/40W tungsten headlamp bulbs!

Then we got sealed beam units that was an improvement! they stayed clean!

Alex wrote:GSF car parts ???

I,ll give em a try

Hi folks My accelerator cable has broke and the local stealer cant supply one.(no longer supplied by the factory- try the BMW club) Euro parts have sent me a 325 cable so I have got to get back to them. I wondered if any of you good people know if anyone still makes em? My Mate is an AA man so we ma...

Mine are these dead easy to fit even in a pre facelift awsom lights but slightly unreliable make sure their actualy on!
but a quick on -off -on and they work fine
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0267222608

Thought I'd join in My 318i M10 does about 30mpg useing it to go to work(about 5 miles)so it never realy warms up, when I went to the Pod it returned 38.8 and that was with us stuck in an awfull traffic mess on the way home :D I use this to calculate: http://www.torquecars.com/tools/uk-mpg-calculato...

As petrol ages it goes off, and then turns into tar.
it can block up the pipe work and the injectors
thats probably whats happened to yours engines wont run properly on stale petrol

At the risk of hijacking for which I apologise but should the aircon switch illuminate?

book a pre aranged MOT You can drive there and home no tax but it has to be local
not too certain about the different start and finish though!

Hi Welcome

sounds like a nice sensible car to start with but Leave the engine alone but sort out all the rest first ,othrwise you end up going too fast for the car

The parking light feature is a result of now redundant regulations. You could always park without lights in a 'built up area',ie one with streetlighting,but only if the speed limit was 30mph,in a 40 zone you were required to show lights.At one time you could buy a light to hang from the top of the ...

yeah having moaned about it , it works fine second time, just got to be careful in daylight fog that both have come on

You might have a slight reduction in voltage to the balast ,mine sometimes dont light unless the engine is running I am going to wire up a relay near the head light to get a better feed to it
thinking is that the 21 year old wing may have a resistance to it

I got hids in my pre face lift their the nuts and I aint got lihght adjusters
but the bloke with the side lights has had me over
he got the money but no lights for me

put a mark on the wheel and the spline so you can put it back in the right position,as you need to release the steering lock

you can get the tools in halfords(lifetime guarantee)

Tyres ,lights, rust ,and windscreen probably most common fails suspension parts can be worn but must not be dangerous! movement should be "exessive"to fail rust shuold fail if near a load bearing point like the seat belt mount or suspension( imagine an area like a football shape around each part )if...

I started to grip me seat

Hi Boys and girls
This is me and the better half on holliday. we thought it funny!!!

soory to hear this ,I was prety pissed when some one nicked me bonnet badge!

Moz wrote:

Muj

very cool

Search found 97 matches

prop shaft U/J

Re:

Re: Remove or cover fuel tank during welding/sawing

Re: HELP!! Removing a F*****G Gearknob

Re: + Feedback for Patch

Re:

eko

Re: lady in distress!!

Re:

Re:

Re:

Re:

Re: 318i M10

Re: has anyone tried these?

Re: Can't get wheel off !

Re: HID issue

Re: ebay hid kits

Re: 318i M10

318i M10

Re: ebay hid kits

Re:

Re:

Re:

Re:

Re: new boy

Re: second 'click' thingy on the indicator stalk... wassat t

Re: HID issue

Re: HID issue

Re: HID bulbs in main beam lights...

Re: Tool Steering WHeel

Re: MOT due

Re:

Re:

Re: STOLEN!!!

Re:photo