E30 Zone

Just removed pasenger door lock want to de-lock.
does anybody know if you have to remove the lug of the back of the barrel lock for it to work right ?

It can be done with tec 2 kit in process myself with mine. In the article section on this site is quite helpful. Your mate is write by the later valance (bolts on) your need to trim down the lip on sills and rear bumper has different fixing points. However not that far myself yet!! Do a search on th...

Thanks alot for the info boys.

Did that today zaust the guy told me it only had ten digits so can't be complete number.
he also said all ther part numbers begin with 230 and 260 is just a stock number.
may be its the bmw agent not very helpful does anybody know the number to a more helpful agent?

Does anybody know if there is more than one part number for a genuine sport gearbox. Bmw parts only seem to have 23001221138 listed with the guy tellig me how old these part numbers are now and infomation regarding these is slowly disappearing. At various times in my hunt for a sport box people have...

Thanks alot boys!!
I will not be swapping now!!!!
Just to clear one matter up are there two versions of tec 2 bumpers?
or just tec 1 tec 2.
P.S your cars look fat!!!!!!!!!!!!!!!!!

Hi sk
Do you have any idea of the mods through,
Dont want it looking s*** thats my point???

Hmmm thats what im thinking My car is h reg 1990 and is pre facelift metal bumpers older style rear lights. I,m no expert but if the later e30 with different lights and i think differnet back pannel would suggest hes right??????????????????? Come on sombody i need to swap tommorow otherwise he wants...

Hi gazza. This is where i am confussed. But someone of the zone has told me that my rear genuine tec 2 bumper will not fit my car (to the left) as my car has the old style back lights. There for i need the other type of tec 2 bumper early version. He wants to swap with me his, as he thinks mine wont...

Hi does anyone know if the pre face lift rear mtec 2 bumper is different
fitting to the facelift. And igf so like belive how much work is involved to fit?
Is it worth it or change bumper.
Cheers

does anyone know if a z3 lsd diff fits an m3 e30

So if you had the money and all the other mods.
Six branch high lift cam chip etc would this be a good kit to go at a reasonable cost? or does it look dodgey when reading specs.

So harry with this kit i could bolt it on and expect good gains??
without new lower compression pistons etc

forgot link go to ebay and type in 120125389778

Hi
just been playing around on ebay and found a company that is selling
a turbo kit for the m20 engine!!
Turbo looks small to me?
Whats your view!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks for the advise.
Can i just ask, is it difficult to post a picture of your car to run along side your text??

This would make some big noises!!!!!! i thinking...
So when i put it back together through the engine over a couple of times by hand .
i will know if its not right?? the pulley you talk about ,is it to the right and just above the crankshft???

Hi Thanks for replys. I have noticed alot of threaded belt all around my cambelt. never seen anything like it before. Its as though a belt has rubbed for one hell of a long time its a centimeter deep in some places. The belt fitted at the moment has rubbed slightly on the edge. But not to that exten...

Hi Does anybody know if the large bollt holding the crankshaft pulley on needs to be removed of to fit a new belt? I have taken of the six 13mm bolts holding the auxilliary pulley of but need to know if the crankshaft pulley with sensor fitted now knocks of or does bolt have to be undo. If bolt need...

Hi
does anybody know why on a 325i head the numbers can differ?
you have part no (always same) date it was made.
I have two heads and at the bottom on one it reads 27/01
on other 10/01.
cheers

Hi ya As talked about last night in part one of the saga. I have now managed to fit the shoes/drum. The handbrake cable was slightly tight in car so i slackened off completly. But this had now joy in fitting shoe/drum. In the end i hand to cut a deeper slot in the adjuster and change the spring, to ...

Yes sure about it the right way round.
Can double check adjustment on handle.
came off pretty easy not that much of a worn disc just upgraded!!!

Hi. i have a tipical 325i brake disc set up! Handbrake shoes, and calipers main! changed my rear disc/drum and can no longer fit the disc over existing shoes. Have taken down adjustment to zero and unless i remove the adjuster for that extra movement cant get it on. I have even taken away abit of sh...

Thanks guys.

Sorry car is 325i 1990 convertible

I have no canister. whats canister for?
yes it is n/s
I belive this pipe lay dorment for a while until i played around
i belive it was just tucked in some
gap on the near side of the engine bay.
thats how i found it.T
Thought nothing of it then starts leaking neat petrol
.

Yeah but my ends spare at the engine end !!!
return etc and other pipes connected tank side okay.

Replaced my rotten fuel tank,fuel hose's under car, fuel filter and changed my fuel presure regulator. But have ended up with a black rubber pipe spare. All hose are connected. thought this must be a breather so left in engine bay and when engine warmed up started leaking. So plugged. Car drives fin...

Hi anybody have drawing or any other infomation on which clips i need to fit mtec 2 body kit. only need side pods and sills.
cheers

carefull with the heat not to hot or you will sofen the nipple .
just done mine.
one snapped .
A trip down the scrappy!!!!

Lowering my car this weekend and have forgot
which way round the rubbers go
Cheerson the rear shock.
Youve got the round one with a top hat and one with out.
Any ideas which is top which is bottom.T

Yeah its not about the fuel etc. I only used it sunny weekends before (Not many of them then)and will continue to do so after its full cosmetic surgery ! But to be honest i want to try a dogleg box in it for this summer with the new diff i bought!!! 3.15 So if anybody nows of a good box let me Know....

I think there as rare as rocking horse shit.
No idea on price though!!!!!!!!!

Thats right mate. I belive so
Dont think it will fit my 325i convertible as its for the m3 i think

Yep looks nice and tasty now mate!!
Look out for my alpine white motorsport convertible Hitting the streets of Reading in a couple of months.
Undergoing Reconstructive surgery

Search found 39 matches

De-locking

Re: M-tec 2 Kit

Re:

Re: sport box or not sport box????

sport box or not sport box????

Re: Mtec 2 rear bumper

Re: Mtec 2 rear bumper

Re: Mtec 2 rear bumper

Re: Mtec 2 rear bumper

Mtec 2 rear bumper

LSD QUESTION

Re: turbo charger anybody!!!

Re: turbo charger anybody!!!

Re: turbo charger anybody!!!

turbo charger anybody!!!

Re: cambelt help!!

Re: cambelt help!!

Re: cambelt help!!

cambelt help!!

losing my head !

shoes wont fit (part 2)!!!!

Re: shoe's dont fit

shoe's dont fit

Re: Mtec 2 kit clips info

Re: where does this pipe go??

Re: where does this pipe go??

Re: where does this pipe go??

where does this pipe go??

Mtec 2 kit clips info

bleeding nipples

shock rubbers

Re:

Re: Oh dear already bought!

Tasty