E30 Zone

it doesnt look like you have to cut the dash, looks like you use sticky pads to hold the unit in place, and have some sort of semi transparent but reflective sticker on the window

would these be road legal?

Thank you Mr Moore, now the fun begins, working out hot to re-wire my car

the car started with a smaller engine but was upgraded before i got it

This has probably been asked a million times, but how do you check what engine is in a E30, i know its a 2.5, but i don't know year of manufacturer

Thanks in advanced.

Cool thanks peeps, i thought i was going crazy as i have a l reg in my garage, what manual would i need, as i cant find one that goes high enough in the years

Is there a 1993 Tourer E30 or not as i cant find anything online and the manuals seem to only go to 1992.

Im trying to cut down on unnecessary wires in my project car and was wondering if anyone knows where i can find any diagrams for the interior wiring, i would like to get rid of the abs ecu and tidy up, possibly re-wire the interior, i have already stripped out the interior but know would like to sor...

As Gortour said above im just starting to re-build my one, i love them, they are such a head turner, i remember when we went to pick mine up, had it on the back of a trailer and pretty much everyone stopped and watched it go past

Just started working on my truck again, i know some people think this is wrong but i like it, anyways I've started a blog to keep track on my progress ..::Clicky::..

that can be arranged i think

okay will check that tomorrow

they looked wet, but not drenched

the sparks are sparking once every two turns

Kerrie the sparks are working there was an alarm in the car but that was bypassed when i first got it, now ive taken the whole kit out, but i have not come across any breaks in wires where the alarm was

i can get the pump to run by bridging two of the pins on the relay housing when i take the fuel pump relay out, its a conversion jobby 318i tourer into a 325 pick up truck, i know its not to everyone taste but i like it, the only problem is that i bought it half done but they left all the wiring in ...

had my 325 project for a while now, the engine was running but went to start it the other day and it turns over but does not fire, i have been working on the wiring and i am pretty sure it is all correct, the fuel pump does not prime on the ignition and only runs if i take out the pump relay and bri...

it sounds awesome i find out what engine is in it tomorrow and try and get some picks, but the language barrier is proving difficult i kinda like the arches but its been raged to hell

So im in budapest working with a company called fuel and 'The Fuel Girls' and they have drift demos, i'm outside and i see this: http://img155.imageshack.us/img155/1455/image019a.jpg http://img203.imageshack.us/img203/1008/image018he.jpg http://img340.imageshack.us/img340/571/image017p.jpg http://im...

Hi there is a new MOT garage that has opened up in Peterborough that runs 24/7 the main tester is a sound bloke who organized all the repairs on my e30 when i took it there and got the car back on the road as quickly as possible, i have spoken to him about the possibilities of doing discounts for an...

Has anyone heard of a day mot i had a tug by the police today and needed to get a re-test, and got talking to the tester about road, track day cars and he mentioned about a day mot which means that you can run your car with no headlights but your car is only allowed on the road during the day, if th...

ive seen a set of lowering springs, as they are different from coilies and as the kit is dirt cheap i don't want to miss it if they can be used on an e30

hi peeps would a lowering kit from Koni For an e36 320 work on an e30 320?

mine had this problem and when i looked at the connector on the diff it was full of water, dried it and sealed it and it has worked fine

excellent seller items arrived as described, Billy even rang me to let me now how he was taking out the carpet for my cab and to tell me in what condition it was in, arrived today at work so i cant get them opened till i get home well packed though, will definitely be doing business again.

Thanks

if the clutch pedal is juddering at idle when not pressed down it sounds like your release bearing as it happened to me a while a go and when i took the gear box my bearing was in two pieces

hey people i have just got my hands on an f reg cab shell for which i am building a website to document the restoration project thiscan be found at http://www.e30build.gq.nu/

you'd be best looking at getting an fia approved roll cage cause they are designed to keep structural rigidity safety devices apparently do some but dont quote me on that

Fli has been designed as an entry level into the vie market yes they are cheaper but for the money you get good sound there not as good as the 'pro' range and the material that they use for the cones are not as good as the 'pro' range, i used to work in the custom car scene and got to know the vibe ...

cool thanks for the link how hard is carbon fiber to use is it as easy as fiber glass?

Hey people were can i get hold of the materials to make carbon fiber ive been searching google but cant seem to find any

i really want one to but money issues at the moment

a spare 200 quid would help

i really want one

when i was rebuilding the old elans there wernt no rattle's but saying that they were a full fiberglass body

i know bodger thats how im feeling all the time at the moment if its not one thing is another and all i seem to do at the moment is hit a brick wall

Search found 141 matches

Re: Head up Display - Â£60, or Â£40 with a 'How To'

Re:

Re: Wiring Diagrams + ABS ECU

Re: How to check a year of an engine

How to check a year of an engine

Re: Really Confused - Help Needed

Really Confused - Help Needed

Wiring Diagrams + ABS ECU

Re:

E30 Truck Build

Re: 325 wont start

Re: 325 wont start

Re: 325 wont start

Re: 325 wont start

Re: 325 wont start

Re: 325 wont start

325 wont start

Re: ummm how can this happen......

ummm how can this happen......

MOT 24/7 Peterborough

Day MOT

Re: e36 springs??

e36 springs??

Re: Speedo not working.. With a twist..

Re:

Re: clutch release bearing help please

My Cab build

Re: Rear seats bulkhead

Re: Are Fli Speakers any good??????

Re: Carbon Fiber Materials

Carbon Fiber Materials

Re:

Re:

Re: fiberglass doors

Re: