yea, mine does the same. (doesnt feel like full in first gear low rpms)....but it definately rocks in second and third. 98 euro 3.2 with zf 5spd. jason

Assault wrote:. I dont know if the standard 325 flanges will fit into the ZM diff, anyone?
]

yep. the 325 diff output flanges will pop into the mz diff. im using the mz diff with the 325 output flanges and 325 half shafts. cheers, jason

http://mukerji.co.uk/vanos/ Ian. really close. im looking for any type of write up that speaks about the wires (shown in the photo) that can wiggle loose from vibration. actually the technitian has built a few euro s50b32's for race cars.... 380hp engines. he is definately a rarity in the states. c...

just completed the install of an euro s50b32 into my e30. the thing rocks. however, i have a lumpy idle. i took it to the dealer to scan for any faults. he plugged in the diagnostic machine and we could watch ALL the sensors and engine timing.....everything. he did notice the exhaust vanos was not a...

lambda probes and reverse switch, right? http://i161.photobucket.com/albums/t211/babarabus/IMG_0793.jpg yep, lambda probes. also wanted to mention that they are numbered. #1 and #2 with the plastic yellow rings near connector. lambda probes are also numbered. #1 goes to cyl. 1-2-3 and #2 goes to 4-...

15. green/black 16. yellow/white 17. purple/white actually i think you got those backwards. a yellow/black is different than a black/yellow. x20 pin 15 green/black should be black(predominant color) / green (color of stripe.) just trying to help. looks similar to my 98 wiring, but you have some add...

On the oil cooler front: How do you intend to fit the Mocal pipes to the S50 outputs? Jai i used the TMS adapter w/ -10an fittings. http://www.turnermotorsport.com/html/detail.asp?PRODUCT_ID=TEN9910200 i actually used the stock cooler, extended the stock cooler lines, then had 10an ends fitted. wor...

greeting from the other side of the pond. ive done a few m50 conversions, but this is my first euro s50. What do you guys suggest I do in the engine bay before I put the engine in? Hopefully the manifold will be ready soon so I might be putting that in at the same time (hopefully making it less of a...