E30 Zone

Hello please price the following for a rear stabiliser

1990 325i sport (mtech suspension)

33551130349 x2
33551124375 x2
07119915066 x2
07119903076 x2

Thank you

Russ

Might be interested to see this sorry collection of cars including a very poorly fire damaged 318is for sale it seems.

This looks worth a look for anybody on the hunt for a Sport. Appears not to have sold at Auction today. Looks genuine in the write up and pictures. Is there a different story close up? Website suggests £20,250 buys https://www.classiccarauctions.co.uk/events/2021-auctions/the-practical-classics-clas...

Cloggy Saint wrote: ↑
Sat Aug 28, 2021 11:14 am
They Could've cleaned them first.

That’s Genuine “Barn Find” dust, should add a few £s

To be clear this item or Auction is nothing to do with me, I don’t know if they are really genuine, simply spotted these in an auction catalogue and thought they could be useful for a Zoner. Anglia Car Auctions Lot 69 (this isn’t a wind up honest) see link below https://angliacarauctions.co.uk/class...

Yes NLA sadly
It’s a shame nobody has taken on the task of making these yet.
I also wish I had purchased a set a couple of years ago when I had the chance!

Headlamp Wiper Blades wanted, new or very good used

Thanks

Russ

Now Free - Here is the Exhaust system from my 1990 325 I removed from my car as not OEM and too noisy for my liking, sounds good when on the throttle but a tad boy racer about town. Manufacturer unknown. Selling as spares or repair as does need a couple of small holes in the welds filling and possib...

Hello, Please could I have a quote for the following

11311739073
01719782681

63121386616 x2
63121378369 x2
63121385397

61131378417 x2
61131378419 x2
61131378418 x4

Thank you

Russ

Can’t help thinking this could be the centre prop shaft bearing/mount. I remember similar symptoms on my 318 some years back.
Hopefully one of the experts will be along shortly to give some thoughts on this, in the meantime I’d give the propshaft a wiggle and see if the mount is kapot!

Bonnet looking great. I hadn’t realised I was missing a timing belt sticker in this location, I shall be ordering myself one!
Looking forward to seeing more engine bay, good luck and keep up the great work.

You’re right their prices look good. I’m just going to have to be patient as they’re on holiday now until end of July!

Nice to see pics of the OEM exhaust, I’d like to replace mine with one but it’s quite an outlay eh,
I note like mine your car is a late 325 and the new system appears to be a 3 piece, does this mean BMW no longer supply the 2 piece?

I think keep it grey paint.

Hi yeah I’ve got the spec sheet from BMW. It shows 4 codes as “Description not found” I found the descriptions for the other 3 here on previous posts, but nothing found for 0485

Hi, can anyone help me identify the description for option code 0485, can’t seem to see it on any of the standard lists.

Hoping it’s Recaro LS front seats only (standard rear seat) as these are fitted but would like to confirm these should be in the car.

Thanks

Russ

The white pieces at the top of the bonnet look new, where did you buy them from and do you know their part numbers? One of mine is leaking and needs replacing alongwith the smaller white connector at the back of the headlights on the drivers side. Sorry just seen this... part is available from BMW ...

Cheers for these pics they help. Looks like yours has t-pieces too so maybe they are correct after all. Mine is also a 1990. If you can post another couple of pics one showing wider angle and another with the other t piece
Thanks

Russ

That looks handy thanks Stones
Seems I should swap the t-pieces for y-pieces

Thanks Brian, I’ve had a good look but I can’t see it, shame that sounds like exactly what I need!

Please can someone share a picture with me the correct routing of the pipes and t pieces under the bonnet. I haven’t changed it shortened the pipes but can’t get all the t- pieces in without the pipes folding up. I have a grey clip and 1x t-piece that are not shown in pic.

Cheers

Russ

I put the cluster back together new bulbs in and still no brake lining light. I disconnected one of the sensors and the light comes on. Having been over the all joints on the board and checked diode and resistor I’m scratching my head. Should the bulb light on position 2 with all the other warning l...

Thanks for the advise, I’ve now reflowed solder joints and replaced batteries and carried out the other checks. Just finishing off this project with the needed replacement lamps and I currently have 1.2W lamps in all but two locations I have 2W lamps in a battery and brake warning tried checking on ...

Thank you Paul for your advice I hadn’t really considered the best conditions for test, I will try that come springtime when there’s no shortage of roads covered in grit from endless pothole repairs!
Thanks Chris for forwarding that post really useful I shall get on with this, a perfect winter job.

Ah yes I see it now, in hindsight I should have removed the cluster rather than work from the footwell! The bulb and holder are missing from the brake lining light will get that replaced. With the ABS I’m not too sure, I will have to test further in the spring, though pretty sure I’ve never managed ...

That’s great thanks for confirming. The Lamp lights with ignition and goes off after engine started. I guess this suggests a working ABS but I’m pretty sure it doesn’t work. I guess I need to test further but car not on the road at the moment. Sorry to keep asking more questions but if that’s the AB...

I'm really confused by this one. From what I can see the cluster has provision for two wired plug in lamps. One for brake linings and the other ABS. I have a lamp with wires Green & Grey/Red. Can anyone help which lamp is this for? I have spent ages contorted in the footwell looking for the missing ...

The ABS lamp holder pushes into a hole in the back of the instrument cluster, and is connected to wires which are part of the ABS loom. The colours are green/red and green (ignition live). http://www.autolib.diakom.ru/CAR/BMW/1989/325i/WIRING%20DIAGRAMS/fig06.pdf or (later version) http://www.autol...

Hi, I'm looking for some help locating the ABS lamp on my car, a previous owner appears to have removed the bulb holder and cable assembly to hide the faulty system. I cannot locate where it should plug in on the loom. Can anyone advise location and wire colours.? Hopefully with a lamp installed I c...

Thanks Brutus for your help. The parts received well packaged, good quality and good prices.

Ah yes I did very nice it looked too!

Oh yes I wasn't sure if that was yours or not, yes had a good look round. There certainly won't be any rust to worry about when they're done very thorough. Would be great to see it when it's finished. I'm going to take mine over for them in October, that way I get a couple of months enjoyment out of...

Just been over to see RetroClassica, very impressed. I'm confident they will do a good job on my car. Quite a few BMWs in there, including as mentioned above the very impressive M3s. Thanks again Triggerfish for the recommend.

No I haven't got storage for it in St Neots at the moment, but it will be visiting over the summer so keep your eyes peeled.

ross2009 wrote:a fellow zoner in st neots ??

Quite a car you're building there. Mine is a standard 325I Sport in White.

Is yours on the road?

Thanks for the picture, hope it all goes well. I'm hoping mine is not going to need quite so much work but until the bodykit is off I won't know the extent of my work.
I am putting mine on the road next week and shall take it over soon to see what they think, I will look out for your car!

Search found 42 matches

Price for parts

Shed a tear over this barn find

Re: Sport prices going up

Re: Pair of Genuine(?) Rear Side Panels @ Auction this weekend

Pair of Genuine(?) Rear Side Panels @ Auction this weekend

Re: Headlamp Wiper Blades

Headlamp Wiper Blades

Free - M20 Exhaust System, custom, part stainless

Quote Please

Re: Intermittent heavy shaking

Re: The evolution of ‘Errol’ the 325i Cabriolet

Re: The evolution of ‘Errol’ the 325i Cabriolet

Re: The evolution of ‘Errol’ the 325i Cabriolet

Re: Option Code 0485

Option Code 0485

Re: Headlamp washer pipework routing

Re: Headlamp washer pipework routing

Re: Headlamp washer pipework routing

Re: Headlamp washer pipework routing

Headlamp washer pipework routing

Re: ABS lamp location

Re: ABS lamp location

Re: ABS lamp location

Re: ABS lamp location

Re: ABS lamp location

Re: ABS lamp location

Re: ABS lamp location

ABS lamp location

Great service

Re:

Re:

Re:

Re:

Re: