E30 Zone

Hi, how much are the rear inner arch panels for an 89 2 door please?

Lee I think thats the thread mate ta!

Think I like the pic jim put up the best but is that alot of work? Think they're all stunning!

Been looking for ages now and can't find it. I remember someone asking if bronzit E30's could look good and someone posted up some awesome pics think they where abit euro but now I cant find the thread! Anyone know what I'm on about?

Need some inspiration!

Awesome cheers mate

If there is anyone familiar with the e46 330Ci could I ask abit of advice? I'm following the bmw330Ci.net write up on the coolant system overhaul. I remember the bloke drain plug is impossible to get to though. The exhaust gets in the way. Do I really need to drain the block? If so how do I get to it?

If I had the sump off the engine would it damage anything to start the car for 5-10 seconds? Maybe a very daft question!

Got a rattle I think maybe coming from the crank and want to see if it is

What mpg do both of these cars average? Trying to weigh up running costs. I'm mainly motorway if that helps

Yep its a haynes roadster. I like the wet layup technique but I'm concerned I won't get the quality.

Anyway wheres your next update?

What sort of temperatures are we talkin? What do you think would be the best method for making a kitcar bonnet?

Can you give a quick explanation of prepreg just to make sure I'm on the same wavelength?

Where did you learn about the carbon fibre techniques? Can you recommend somewhere to start learning?

Bump as need the Disa unit fairly quickly. Colour is titan silver for the door seal.

More pics of how you're doing the carbon fibre are deffo needed! Awesome!

Not to be rude but are you sure thats the correct PDC sensor? Nottingham Sytner quoted £65ish each.

Thanks
The Disa unit is on the side of the intake manifold.
http://www.realoem.com/bmw/showparts.do ... g=11&fg=40

Part #7 I think

Thanks Rich

its not painted. Its the oblong shaped. rear

E46 330Ci 2000 X
Drivers door seal
Disa Unit
1x PDC sensor
1x Lambda sensor (not sure if its pre or post yet sorry)
Thanks

E46zone.com or e46fanatics.com uk section?

Cheers mate. Wonder if this could get me off the negative list now?! Mods?

E46fanatics.com seem to be very good. I've used a fair bit of their advice and come up trumps. E46zone.com is good too but not as many members.

0W-30 Is the bmw recommended oil for the 330Ci. Using 5W-30 is cheaper and will run just fine. 10W-40 mmmmm not sure bout that

I have a set of springs with serial numbers printed on them quite clearly. They are made by Apex. Fronts read - 20-10351 VA45/03. Rears 20-10352 HA 45/03.

How can I find what model E30 they are for and the specs?

Yeh mine will use 4litres in about 6weeks but i do alot of miles. Its ok to use 5w30 which if you buy at tesco's is have the price of 0w30

Replacing my front suspension with some 2nd hand parts. If my 2000 330Ci has sport suspension will a M-tech shocks and springs etc from a 2001 330Ci fit?

My RH FR strut reads

82.4903.556 618
31.31-96.856
6Z SPORT

Does that make my part number 556 618?

Should be getting his part numbers today.

No probs mate blummin heavy to carry to the post office though haha

I sent you a Pm about it and yes it was from me. I realise I have been a tit about it and I am very sorry. Should have pulled my finger out.

Check out e46zone.com or E46fanatics.com

Just phoned BMW in Notts. £10 each for the studs!!!!!!!!

Ahh couldn't pop them out the other side so going to drill them out and fit 4 new ones. What should I put on them to stop them corroding again?

That was my plan. Didn't know if it was spose to pop out tho. Thanks mate

Changing my clutch. While taking off the exhaust I managed to snap a stud. As per the pic. Will it just pop out the other side with a bit of force or what are my options? need to get it fixed today really.

NOOOOOOOOOOOOO lol thats the last thing I wanted to hear in this weather and no garage!
Do you know where the fluid pot is on these cars?

I was driving through town yesterday all was fine then as a pressed the clutch pedal in to change gear it started to make a loud grinding sound at the end of the pedal movement. I have figured out that something is touching the flywheel. It still changes gear ok aslong as I dont use the full movemen...

thats limmets car, he also built an m20b30 with 1100hp, then fitted a v8 engine! project thread here. but first part is the m20 build, then the v8. http://www.zatzy.com/projekt/300951-limmet-bmw-e30-speedfactory-budget.html second pic down on page 35 made me giggle! mmm who loves arc eye? or a spar...

If they fit under 16's which I have and am quite fond of then I'm game

Search found 720 matches

Arch panels

Re:

Bronzit euro E30's

Re: 330Ci Coolant system

330Ci Coolant system

Sump off

E30 and E36 IS MPG?

Re: Freakin' awesome! Guess what I just bought :D

Re: Freakin' awesome! Guess what I just bought :D

Re: Freakin' awesome! Guess what I just bought :D

Re: Freakin' awesome! Guess what I just bought :D

Re: Price Please

Re: My E30/R5Turbo track car

Re: Price Please

Re: Price Please

Re: Price Please

Price Please

Re:

Re: Rik178m- positive feedback

Re: E46 advice needed,re-coding Q.

Re: e46 330ci tech help please

Identifying springs

Re: e46 330ci tech help please

E46 shocks

Re: Rik178m- positive feedback

Re: Rik178m

Re:

Re: Urgent E46 problem.Help please

Re: Urgent E46 problem.Help please

Re: Urgent E46 problem.Help please

Urgent E46 problem.Help please

Re: E46 330 problem!

E46 330 problem!

Re:

Re: Big brake conversion