E30 Zone

There are going in the front doors, I have built a door pod type fingy out of MDF anf fibreglass and moulded them into the arm rest door handle thing, they look ok for a job that i have done lol, could have been worst I suppose, to top that off I have just picked up a Fli 1000w active 12" sub for Ã‚...

Item title: Lanzar 500 Watt 6.5'' Component System 6 1/2" Web Address: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220097767047 Item number: 220097767047 Buyer User ID: 69dazzle Seller User ID: raidperformance Your total: Ã‚£96.99 This is a copy and paste from my email, price is including p...

Kam, I was hoping somone would say the Lanzars because I kind of had my mind set on them anyway, I have found some on Ebay for around the Ã‚£100 mark, you see I have got the Vibe QB69 600 watts in the rear and I just didnt think the Infinitys would be able to keep up, Thanks for the advise Ebay here...

people, after my last post I have narrowed my search for 6.5" components down to the last 2 in my budget, tell me which ones I should go for, the choices are

http://www.lanzar.com/itempage.asp?model=OPTI6%2E1

http://caraudiosecurity.com/shop/produc ... /3830.html

Thanks guys

cheers guys, i am going to put the components into my door builds as im going with 6.5" rather than 5.25" I have an amp in the back powering the vibes and my (dont laugh) Bocshman components, i believe the amp is 4 x 400watts so there is plent of juice to run any good set of speakers, im not going t...

cheers rebel, what about the Infinity components, i have got the Vibe QB68 rectangle speakers in the rear so I am realy after somthing that can keep up with them, well at least try to as there 600 watts

Just found these on Ebay, im unsure because iv never heard of them, any one got any of these or ever had them, wot do you think

Thanks in advance

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... L:RTQ:UK:1

gleeeeeeming, im gealous, looks like its been sent back to the future or somthing like that, you know what i mean, lovely

I bought a stainless backbox DTM style off Ebay for abot Ãƒ”šÃ‚£60 inc shipping from the states, i must say they look great on my tech (kit), its sounds great too and for the money you cant go wrong, it cost me Ãƒ”šÃ‚£25 to get fitted by a mate who had to do some pipe bending and welding so it was a...

it is possible to go withother offsets, eg. like an offset of 35 but you will need 10mm spacers to pull the wheel away from the brakes and to stop them rubbing on the suspension, you will also need longer wheel bolts,

anyway that is how my team dynamics "Osaka"s are fitted and without any probs

Sorry but i dont think that the lead will go down the passenger side if its 2.5m long you might have to buy some more from an audio shop they do it by the meter, if you use your imagination and pretend to run some string along roughly where the lead goes and add a foot or 2 then you will know how mu...

If you take your glove box and assembly out there is a gromit around there somwhere which i think is easier than trying to go thru the drivers side, if you have to cut the gromit put a small x in it with a stanly blade just big enough for the power cable to go thru and when the cable is secured with...

Ed325i, Just out of curiosity how much are you after for them, and do they have tyres

Hi lads and laddetts,

I am undecided whether to go with some 15" deepdish wheels or somthing like 16 or 17" alpinas (poss replica), what do you think would suit a black tech1

Or if there is any other styles please show me and post pics on this thread

Thanks

ahhhhh, i have just creamed my pants

Does any one know how big (in inches) the diameter of the air intake is on a 320i pre 1987 (the bit where you would attach a k&n) as i have just stumbled across a k&n at work (4 inch diameter) and the 320 is at home so i cant measure

Thanks

Zaust you done the trick, well packed as described top geezer

you might want to change the tyres to 215 40 17 or 205 45 17 as 205 40 17 are the wrong size for an E30

Is there any thing else that can be done???

Also what sort of money am i looking at for a inlet manifold and or throttle body (pref big bore)

1.lizzie, west london,england. 2. kidsinister - Alec J. Wood - with a stinking cold - Oldham, God's own county of Lancashire. 3. Splondike (Mark) - A sunny Ashford in Kent 4. Geeman (Giles) - Grimsby - Not much to say really... (no fish jokes) 5. E30WEZ (Wez) - Hastings - In sunny East Sussex... 6. ...

Nothing wrong with that dude, i have a 316 with just the front bumper, so my 320i will have the full kit

i have team dynamics Osaka wheels with a 35 or 38 offset, but luckily they make 10mm spacers which fit straight onto the hub with out the need for spigots

ps. i needed longer bolts

Just whack some duct tape over the rusty bits for the Mot, then take it off as you leave the garage to save embar

esment

Another good Tyre which i highly recommend as i have had 2 sets in nearly 3 years is the "Vredestien Sportrac" in 215 40 17 very sticky in the wet and dry, or the Avon ZZ3, very good in the dry but not so much in the wet, but you cant go wrong with the sportrac and they wont cost a bomb

I think you are better off making a complete shelf rather than pods at least that way you can always replace the original shelf instead of cutting ugly holes in it Whaen you make a shelf you have to raise the whole shelf up not just the speakers, what i meen by this is take 1 piece of MDF (as thick ...

I have a 316 and a 320i which i am going to make one good car out of, now somthing that i dont know much about is diff's, i believe the 316 has a 3.91 and the 320i has a 4.10 now i am going to use the 320i engine so would i be better of leaving the 4.10 in or swap it for the 316 3.91 diff What diffe...

yeah baby, i think i need to lay down now

I bought a tech 1 kit of Ebay recently and i have just picked up an old 320i but it needs some TLC before i can think about tarting her up, can any one who has a tech 1 post some pics on here for me as i need to see what mine will look like when she is finished, also does anyone make a front splitte...

is it possible to make some pods out of MDF to sit them on? you could either fibreglass them in to shape then spray them or cover with fabric to match the interia, other than that you could make a MDF parcel shelf, i have one for mine but i dont know if it was made by somone or a company as i rescue...

got to say, i bought the mag the other day and im soooo jealous, she is bootiful

wow she is sexy, the stuff dreams are made of

I thought the 325i intake wouldnt work, only with a motronic setup, please correct me if i am wrong

I posted a message the other day about tuning a 320i, unknown to me it is a jetronic type, i had a few tips on how to tune a motronic type like fitting a 325i throttle body and inlet manifold, will this still work with a jetronic, any tips would be great, ps. I dont fancy fitting a whole 2.5 as the ...

Dont knock it till you try it, thats what i keep telling the missus

Firstly it depends on how bad they are, if you are a confident person with a grinder and a wire wheel why not take away all the rust then treat the affected area with a rust treatment like the one hammerite do, then add a coat of zinc primer after lightly rubbing down to inhibit the rust then with s...

Search found 39 matches

Re: help with speakers, lanzar or infinity

Re: help with speakers, lanzar or infinity

Re: help with speakers, lanzar or infinity

help with speakers, lanzar or infinity

Re: component speakers, anyone got these ones????

Re: component speakers, anyone got these ones????

component speakers, anyone got these ones????

Re:

Re:

Re: help with wheels

Re: Wiring up an amplifier?

Re: Wiring up an amplifier?

Re: help with wheels

help with wheels

Re: MY TOY

Just a quick air intake question

Re: zaust

Re: 17x8 et40, what spacers?

Re: tuning a Jetronic 320i

Re: south africa

Re:

Re: what offset is ok for 17 inch wheels?

Re: rusty arches

Re: Tyres.... can you help

Re:

which diff?

Re: show me your tech 1's

show me your tech 1's

Re:

Re: Sport piccies 56K beware !

Re: tuning a Jetronic 320i

tuning a Jetronic 320i