E30 Zone

They are just pieces of sh1t that don't have the talent or skill to build they're own cars.
I do hope he gets hit by a bus very soon

They are just low life scum. I will never give up looking for it or parts. I built that car myself so I know ever inch of it. I've always been into my classic cars but after this it just makes you feel it's not worth the hassle enjoying them because w@nkstains like this want to ruin that for you. I ...

Cheers guys, much appreciated.

Great, cheers bud
Just so gutted

Hi all, I was sickened this morning to wake up and realise some useless scum piece of sh*t had stolen my E30 cab that I've own for 17 years off my driveway during the night. These tw@ts would hate it to happen to them but more than happy to wreck other peoples lives. After speaking to my neighbours ...

Yeah plan to use the stock idle valve. yes running wasted spark, I've got a GM coil pack coming this week

Who on here has built their own kit? I'm nearly done with it just a bit confusing as to what to do with the last few pins on the board. OP+, OP-, VR2, IAC. Does it look about right http://i155.photobucket.com/albums/s311/badger_030/image2_zpshe1gj6jr.jpg http://i155.photobucket.com/albums/s311/badge...

I just bit the bullet and bought a megasquirt diypnp kit for my e30 m30 cab. I've fitted a eaton m112 charger on my e30 and wanted full control over the tuning and the MS units for the money seem the way to go You can buy the ecu pre built but I'm on a budget so bought the build your own kit. Saved ...

Ok, I see
That's all I wanted to know really. I was just unsure if it needed the controller or if it could run the sensor on its own.

Cheers

that's what I'm on about using is a wide band sensor. I just wanted to see what other people are using.
The innovate kit seems to be the popular one but they are around £140 and a normal wide band o2 sensor is £50

Hi All, Decided to get rid of my unichip as I can't find anyone to tune it or purchase the software and go for a megasquirt diy kit. Question is, can a normal wide band o2 sensor be used? As I'm trying to keep the cost down at the minute and all I've been reading is people like to use the innovate l...

I already have a unichip on mine. I had it installed about 4 years ago so that would just need a tweak. I've found an option for the MAF. http://www.bimmerforums.com/forum/showthread.php?1228729-Make-your-own-MAF-conversion-for-under-50-I-did-it Does anyone know where I can get hold of the unichip t...

Yeah its for my supercharged 3.5
I'm already running a unichip so will be able to fiddle with that to get it to run properly with a maf.
Got mine running now so really want to get rid of the dodgy old afm and go for something more free flowing and less restrictive

So nobody on here has used a maf from another bmw or any other

Ok cheers I'll take a look.
I can't see how the miller unit is much different to a standard bmw MAF.
Its just the tuning

Hi All, Just looking around the net to see what MAFs people are using. I know you can buy the miller setup but to be honest its over priced for what it is and I'm running a unichip on my setup so that can just be tweaked. Has anyone on here used any MAFs from other models and wired them up? I'll loo...

My cab is pre facelift and I made some mounts, cut a section out of the front panel for it and it fits perfect. Got the mtec bumper on it now and it sits right behind the grills and about 1.5 inches above the bottom of the bumper so perfect http://i155.photobucket.com/albums/s311/badger_030/Intercoo...

Hi All, Getting close to finishing a eaton SC install on my m30 cab and could do with changing the clutch as it wasn't great when I last drove it. Anyone got any suggestions for an uprated clutch?? Mines running a e28 single mass flywheel and looking around online and there don't seem to be many pla...

Hi All, Recently fitted a eaton SC to my m30 cab and thought i should maybe look at uprating the clutch as the old was a tad weak before i stopped driving it. Mines running a e28 single mass flywheel but struggling to find anywhere that does uprated clutch kits for these. Anyone have any recomendati...

Mine is more or less done now and i reckon with everything i've needed to buy i'm up to around £500
I've made the brackets and other custom bits i've needed so thats saved money

Thats cool, i want to stick with my original rad anyway as i got it new and i've been running it around a few years now and its been spot on. May have it sorted now by smooting the edge of the SC pulley and bolting up the rad but its super tight. Probably only got like 1/2 inch gap between the SC pu...

Yeah i'm also using the e28 rad. Been running a m30 in my cab for about 5 years now so kinda wanted to stick with this rad. Just the space is proving to be a headache! May go to my local breakers tomorrow so i'll see if i can find a thinner rad that i can make work. Doing some bits on it tomorrow so...

Any ideas?

Bit stuck with this one Got my charger all fitted as far back as it can go, had it running and it sounds awesome! I have modded and welded a pulley on for the charger and plan to run the charger and power steering pump off the same belt for the time being. At the minute the crank is running alt/wate...

Ok cheers chaps
I'll have a look for 1

No picture, its at home.
It just came with the housing slid over the long bolt that holds the canister on.
Fitted a new filter and if the spring goes back over the bolt like it was but it seems pointless as it just slides up and down the long bolt.
Just thought it must have a purpose

Anyone ever seen it??

Yeah it doesn't show a spring but it came with it so i'm a bit confused

Anyone know where the spring goes for this oil filter housing??
When i bought the unit and it came with a spring but i can work out where it goes.
Can't find much online about it

Alright chaps After a bit of help if anyone knows. I've bought a e28 oil filter housing for my m30 powered e30 cab as I'm in the middle of fitted a eaton SC and didn't have the clearance for the standard housing. I've been reading that in order to use the e28 housing you need to block one of the dra...

In the middle of doing this and just sourcing parts. Just working out what injectors i need. Reading stuff on the net about the 24lb injectors from a e36 seem to be a good bet. Not planning on going mad with power just want to make sure its safe more than anything. Any suggestions with be much appre...

Cheers for that. I knew I've seen one but could remember what on.
I'll have a look around for 1.
Yes, the chargers been a bit of a pain to get on and work stuff out but its coming together now, just sourcing parts I need
Should be fun though!

Alright chaps
In the middle of fitting a eaton m112 charger to my m30 cab.
Got it all mounted, just run into a problem with the filter housing, being with the charger bolted in, there's no space for it.
Is there any filter housings on other m30'd cars that will work??

Lower arm arrived and in good condition as described and well packed
Posting could have been faster but i still received it in time to fit.
All in all, good price good seller! will buy from you again

Cheers Mick

Cheers for that.
With any luck its not the CAT

Search found 241 matches

Re: My beloved BMW E30 cab stolen on wednesday night

Re: My beloved BMW E30 cab stolen on wednesday night

Re: My beloved BMW E30 cab stolen on wednesday night

Re: My beloved BMW E30 cab stolen on wednesday night

My beloved BMW E30 cab stolen on wednesday night

Re: BMW E30 MS DIYPNP KIT

BMW E30 MS DIYPNP KIT

Re: SC'd M52 ECU options

Re: M30 Megasquirt wide band lambda

Re: M30 Megasquirt wide band lambda

M30 Megasquirt wide band lambda

Re: AFM to MAF upgrade on the M30

Re: AFM to MAF upgrade on the M30

Re: AFM to MAF upgrade on the M30

Re: AFM to MAF upgrade on the M30

AFM to MAF upgrade on the M30

Re:

M30 UPRATED CLUTCH KITS???

M30 uprated clutch kits??

Re: What injectors would be best for a M30 with eaton M112 S

Re: M30 cab eaton m112 SC radiator issue

Re: M30 cab eaton m112 SC radiator issue

Re: M30 cab eaton m112 SC radiator issue

M30 cab eaton m112 SC radiator issue

Re: e28 oil filter housing spring??

Re: e28 oil filter housing spring??

Re: e28 oil filter housing spring??

Re: e28 oil filter housing spring??

e28 oil filter housing spring??

E28 oil filter housing mod for e32 block??

What injectors would be best for a M30 with eaton M112 SC??

Re: M3O down facing oil filter housing??

M3O down facing oil filter housing??

Re:

Re: Non E30 related question