E30 Zone

Hi my clutch went the other day and the pedal stays down on the floor. I thought the slave and master cylinder had gone, so I took a look at it today and it seems like my pedal has broken. It just moves up and down and the spring and everything else stays still. Has this ever happened to anyone else?

Nice 1 just what I've been looking for

What offset do the wheels have?

I got mine to fit

Cheap skates 1 - OEM Homos 1.

Just finishing fitting mine today I had some clearance issues with the lower steering uv joint it catches slightly on the corners. I changed my engine mounts and gearbox mounts this gave me the clearance that was needed. I also removed my uv joint and rounded off the corners just to be on the safe s...

will take some pics tomorrow

Hi I bought one last week and they are excellent for the price. At first I bought one from hottuning but sent it back because of the poor quality and fitting problems. This one fits great and because the welds are better I expect better performance gains than the hottuning one.

On my 17" alpina reps i need to run 15mm - 20mm spacers

I was looking into this also but in the end i thought why bother because there are no real advantages in having 5 studs.

You can get them from 300mm.de

http://www.300mm.de/325mm/325mm.htm

Got mine also :cool: So the first thing I done was to bolt them on to my brembo 4 pots 8) But the bolts wouldn't go all the way through the holes in the brackets, No biggy tho, I just opened them up a bit with a round file, Mebbies the next batch could do with a slight increase in the hole diameter...

In my opinion your brake system is completely unbalanced you have a extremely large pad surface and nothing to push them with and the Golf and Clio servos in my opinion are just a way to get the engine to fit and are a downgrade to the original setup. Have you considered fitting the E34 V8 servo.

how much are they with bolts etc and will i only be limited to using the 730 brembos or could i use other brembos? Thanks, Tam Hi they only fit the 730 brembos. You can find the calipers on ebay I got a set for £70. I only supply the adapters. The only bolts you need are 2x M12x40mm you can get the...

Hi everyone the adapters have arrived I have 5 sets of option 1 and 4 sets of option 2. PM me for payment details.

I have adapters so you can fit 312mm discs and E38 Brembo calipers or E34 540i / E32 750i calipers but you need to run 16" wheels and wheel spacers. WMS make a set of 4 pots that will fit under 15"

E32 750i part number
03.2 125-2802.3

1 Taxin option 2
2 Padi
3 Craig option 1
4 noclue option 1
5
6
7
8
9
10

Hi I bought the Hottuning manifold and sent it back because it didn't fit. you can get the same manifold from here cheaper. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350451771046&ssPageName=STRK:MEWAX:IT#ht_1610wt_1139 http://img849.imageshack.us/img849/7661/dsc01161c.jpg http://img864.im...

I have ordered Option 1. For option 2 I send them to a machine shop to be milled but I think it would be cheaper for you to get them done with the discs . I will post a fitting tutorial soon

OK just ordered 10 sets of adapters they will be ready next week.

1 Taxin option 2
2 Padi
3
4
5
6
7
8
9
10

Due to lack of funds wont be getting them made until I get my next student loan in may. I need to order 10 sets because the price for just 1 set is £90. I spoke with MTEC brakes and they can make drilled & grooved discs 312mm 4x100 with a 66mm hub for £95 + postage but that quote was for 10 sets.

Ok I will be ordering 10 sets of adapters next month. They will allow you to run 312mm discs and E38 Brembo Calipers on your car. I bought a set of E38 Brembo calipers from ebay for £70. You will need at-least 16" alloys and spacers to run these brakes. First you can buy the discs from ebay for £99....

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290368723148&ssPageName=STRK:MEWAX:IT#ht_2197wt_905 I had the centres machined from 65mm - 66mm cost me £20 I'm getting a batch of adapters made next month 12mm 6082 T6 Aluminium £40 Got a set of E38 Brembo calipers from ebay for £70 You can also ...

Hi i have been working on a brake upgrade using OEM parts I made adapters for the 305mm discs and the 312mm. For the 305mm the adapter would have to be set either above or below the normal caliper position. I found the best way was to go 312mm you can get the 4x100 discs from ebay. With the 312mm yo...

On the side skirts it looks like you should have removed the old clips before you fitted it.

Try this one just got a renewal for my 325i cab £230

http://www.footmanjames.co.uk/

WMS or 300mm.de are the only ones offering upgrades that fit under 15" at the moment.

The E38 calipers fit under the 17" alpina reps with 10mm spacers. They might fit 16" alloys not tested them yet. I managed to get a pair of E38 Brembo calipers on ebay for £70. So with a bit of luck you could have this setup for £250

I would never consider using E36 legs it causes loads of problems. Everyone who done this mod in Germany changed back to normal E30 parts.

Ok got the final design ready and the first prototype was laser cut from mdf for testing and fits perfectly. It looks like the 312mm E38 calipers will fit under 16" wheels. They fit under my 17" alpina reps with loads of room but I will need to use 10mm wheel spacers. I will work on something for th...

Hi i'm just getting a batch of discs and adapters made they will cost about £180. You can get the E38 Brembo calipers from ebay for £200

I'm using E38 730i Brembo 4 pots for the 312mm set and they are huge. Everything is arriving this week so i can start with the adapters.

Same system can be seen here
http://www.300mm.de/313mm/313mm.htm

I'm working on this at the moment just need to pop down the local scrappy to get the parts to test. 300mm.de are selling what they call special hub bearings for this. But as far as I can see they are using E34 hub bearings for the front. For the rear you can use the E36 hub bearing. The only downsid...

Hi everyone I'm currently studying product design at UCLAN Preston. I have decided to use my skills and the prototyping equipment available to me for some small mods on my E30. My first project is to develop a set of brakes based on available components. I'm still at the research phase and I have fo...

Search found 111 matches

Broken clutch pedal

Re: E21 gearbox mounts

Re:

Re: Cheap stainless Exhaust Manifold

Re: Cheap stainless Exhaust Manifold

Re: Cheap stainless Exhaust Manifold

Re: Cheap stainless Exhaust Manifold

Re:

Re: 5 stud hub???

Re: 5 stud hub???

Re:

Re:

Re:

Re:

Re: Brake upgrades

Re: 7 series brake cylinder

Re:

Re: 1989 325i Cabrio exhaust question

Re:

Re:

Re: seat ibiza brake discs.

Re: seat ibiza brake discs.

Re:

Re: seat ibiza brake discs.

Re: seat ibiza brake discs.

Re: Reverse Light and Convertible Side Skirts

Re: May have to sell 325i, insurance woes - help!!

Re: e36 328 brakes on a e30?

Re: e36 328 brakes on a e30?

Re: e36 328 brakes on a e30?

Re:

Re: e36 328 brakes on a e30?

Re: 305/312mm Brembo Brakes

Re: 4 stud to 5 stud conversion, best way to do??????

312mm Brembo Brake Adapters