hi,
Quick qu...
Will a box from a pre-facelift 320 fit ok onto a facelift 2.5? I understand that the pre-facelift has two box sensors and that i can just bung one of those up? Presume the flywheel, clutch etc from the 320 will be ok aswell?
Cheers
Pre-facelift gearbox and facelift engine...
Moderator: martauto
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Will be fine fella. Will be just like having a sport box but not as strong.
M30 Tech 1 Touring on gas.
-
Rav335uk
- E30 Zone Meets/Events Team
- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
I have a 2.5 prefacelift sport box if you want one, with the 2 sensors on the g/box.
Rav
Rav
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
town325i
- E30 Zone Team Member
- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
Sensors arnt needed on a face lift engineRav335uk wrote:I have a 2.5 prefacelift sport box if you want one, with the 2 sensors on the g/box.
Rav
I have a facelift 2.5 box cheap
-
Rav335uk
- E30 Zone Meets/Events Team
- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Just read it again 
I have a 2.5 box too for sale.
I have a 2.5 box too for sale.
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Think the Pre facelift can be used in a facelift, just need two blanking plugs for where the censors were/are.Rav335uk wrote:Just read it again
I have a 2.5 box too for sale.
Stand to be corrected though.
-
town325i
- E30 Zone Team Member
- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
Thats true but if a face lift box is going for £25 might as well take the right box for the jobgooner1 wrote:Think the Pre facelift can be used in a facelift, just need two blanking plugs for where the censors were/are.Rav335uk wrote:Just read it again
I have a 2.5 box too for sale.
Stand to be corrected though.
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
town325i wrote:Thats true but if a face lift box is going for £25 might as well take the right box for the jobgooner1 wrote:Think the Pre facelift can be used in a facelift, just need two blanking plugs for where the censors were/are.Rav335uk wrote:Just read it again
I have a 2.5 box too for sale.
Stand to be corrected though.
Can,t argue with that, bloody good price.
-
allstar_07
- E30 Zone Newbie
- Posts: 153
- Joined: Wed Aug 19, 2009 11:00 pm
cheers guys. Sounds like it should all be ok. Do I use the 2.0 flywheel etc?
Rav/Town325 - I'm actually trying to source the parts for a manual conversion at the same time as fitting the engine so if you have any bits as well as the box drop me a pm. Cheers
Rav/Town325 - I'm actually trying to source the parts for a manual conversion at the same time as fitting the engine so if you have any bits as well as the box drop me a pm. Cheers
-
town325i
- E30 Zone Team Member
- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
All i have is the gearbox thats it i could do you a deal on the 320i selector bits from the manual box if you have them
-
allstar_07
- E30 Zone Newbie
- Posts: 153
- Joined: Wed Aug 19, 2009 11:00 pm
I've got a 320 auto and a 2.5 engine so need a manual box and conversion parts. What selector parts are you talking about?!
-
town325i
- E30 Zone Team Member
- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
Its ok its from a manual i need it from