nsf central locking problem

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
User avatar
kylepiggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 146
Joined: Wed Feb 28, 2007 11:00 pm
Location: Burgess Hill, West sussex nr Brighton

Thu Nov 27, 2008 5:44 pm

hey guys i got problems with my central locking on the nsf well it don't work i removed door card to investigate to find out there was no actuator fitted so i fitted 1 from a spare door that i had. so fitted it and when i now go to lock the doors the nsf still does not work but as soon as i lock it it unlocks again. any help would be nice as i am baffled. as soon as i disconnect the plug to the nsf actuator the central locking works fine apart from the nsf not locking or unlocking. its an 88 2 door if that makes any difference thanks guys
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Thu Nov 27, 2008 7:17 pm

It sounds like the actuator you fitted doesn't work
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
User avatar
kylepiggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 146
Joined: Wed Feb 28, 2007 11:00 pm
Location: Burgess Hill, West sussex nr Brighton

Thu Nov 27, 2008 8:47 pm

my thpughts aswell so i tried another 1 and same problem happened
User avatar
damo180
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Wed Jan 23, 2008 11:00 pm

Thu Nov 27, 2008 11:54 pm

take off the panel at the footwell and take out the speaker driver side there is a black box in the pillar change that.it wount be that obvious to find
Post Reply