Check this vid --------------
Moderator: martauto
- --alpina--
- E30 Zone Regular

- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
On youtube, apparently this guy says he took the s14 M3 engine out and stuck an M20 engine in there, and changed the subframes and suspension, to me thats some heavy B-LLSHI-
what you guys reckon????
j
what you guys reckon????
j
- --alpina--
- E30 Zone Regular

- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
what you mean??
Thats a kit bonded and painted on his car!! i dont believe this guy, whos stupid enough to do that, dont makes sence!!!
j
Thats a kit bonded and painted on his car!! i dont believe this guy, whos stupid enough to do that, dont makes sence!!!
j
must be one hell of a kit as its got the raised roof section
-
Colonel Sanders
- Le Surrender Monkey.
- Posts: 1296
- Joined: Mon Aug 07, 2006 11:00 pm
- Location: guernsey.... i mean france munching on garlic and drinking wine with my children.
that is a real m3, cant remember where i have seen it before but i have.
plus i was looking for an m3 shell to put my m20 turbo in as i dont like the s14 lump but like the car..
cant understand why people are getting shitty on there about it.. its his car to do as he pleases....
plus i was looking for an m3 shell to put my m20 turbo in as i dont like the s14 lump but like the car..
cant understand why people are getting shitty on there about it.. its his car to do as he pleases....
thats straight up that car,why not take out the 4 pot and replace it with something a bit more fruity lol,its only an old m3 anyway,with that set up it should be able to beat most of the modern hot hatches that would normally eat n m3 for breakfast
-
stevotheevo
- West Sussex Hooligan
- Posts: 1153
- Joined: Mon Apr 09, 2007 11:00 pm
- Location: f@cked right off
-
stevotheevo
- West Sussex Hooligan
- Posts: 1153
- Joined: Mon Apr 09, 2007 11:00 pm
- Location: f@cked right off
wish i was pissed,but i do have a habit of getting banned so try not to go on t'internet when on the stella lolstevotheevo wrote:im pissed, so i dont care; but 4 pots do suck M3 or not.c2pete wrote:ha ha didnt want to open that can of worms againstevotheevo wrote:end of the day 4 pots suck and 6 pots rule.
enough said
-
stevotheevo
- West Sussex Hooligan
- Posts: 1153
- Joined: Mon Apr 09, 2007 11:00 pm
- Location: f@cked right off
fair enough mate, dont think im banned from any forums yet.c2pete wrote:wish i was pissed,but i do have a habit of getting banned so try not to go on t'internet when on the stella lolstevotheevo wrote:im pissed, so i dont care; but 4 pots do suck M3 or not.c2pete wrote:ha ha didnt want to open that can of worms again
4 pubs and 1 main dealer (ford) but there has to be a first.
4 pots suck ass
- --alpina--
- E30 Zone Regular

- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
just curios, if your gonna fit an M20 engine into an M3 shell, would you need to change the front crossmember for the engine to bolt on or will it go straight on to the 4 cylinder M3 crossmember?
cos theres seem to be some silly arguement about it on the link above where the video is.
j
cos theres seem to be some silly arguement about it on the link above where the video is.
j
-
stevotheevo
- West Sussex Hooligan
- Posts: 1153
- Joined: Mon Apr 09, 2007 11:00 pm
- Location: f@cked right off
- --alpina--
- E30 Zone Regular

- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
looooool
true
j
true
j
- AlexBaur325
- E30 Zone Regular

- Posts: 685
- Joined: Fri Nov 02, 2007 11:00 pm
what happened...tell1 main dealer (ford)
-
stevotheevo
- West Sussex Hooligan
- Posts: 1153
- Joined: Mon Apr 09, 2007 11:00 pm
- Location: f@cked right off
ongoing problems with my 03 mondeo, the weasel face muppet behind the jump was, IMO winding me up, so he was grabbed by the tie and pulled over the counter.AlexBaur325 wrote:what happened...tell1 main dealer (ford)
i then explained to him that i wasnt happy with the service i was receiving.
after our little chat, i was then informed that my future presence on the ford grounds would involve the local constabulary.
plus a little pic of ongoing problem.

- AlexBaur325
- E30 Zone Regular

- Posts: 685
- Joined: Fri Nov 02, 2007 11:00 pm
Brilliantongoing problems with my 03 mondeo, the weasel face muppet behind the jump was, IMO winding me up, so he was grabbed by the tie and pulled over the counter.
i then explained to him that i wasnt happy with the service i was receiving.
after our little chat, i was then informed that my future presence on the ford grounds would involve the local constabulary.
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
- Contact:
Surely the wheels arent the dealers fault?!stevotheevo wrote:ongoing problems with my 03 mondeo, the weasel face muppet behind the jump was, IMO winding me up, so he was grabbed by the tie and pulled over the counter.AlexBaur325 wrote:what happened...tell1 main dealer (ford)
i then explained to him that i wasnt happy with the service i was receiving.
after our little chat, i was then informed that my future presence on the ford grounds would involve the local constabulary.
plus a little pic of ongoing problem.
- --alpina--
- E30 Zone Regular

- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
Typical ford to go wrong all the time..
FORD stands for .... Fix Or Repair Daily... or Found On a Rubbish Dump.
j
FORD stands for .... Fix Or Repair Daily... or Found On a Rubbish Dump.
j





