E30 Zone

Posted: **Thu Jan 03, 2008 5:04 pm**

To start off the new year we have our dyno developed and tested chips on offer for January 2008 only.

Any Evolve Chip for the following cars for Ã‚£40

E30 318iS
E30 320i
E30 325i (pre and post facelift)

Please call us on 01582 584 000 to place your orders.

Posted: **Thu Jan 03, 2008 6:06 pm**

any gains runnisg the 325 chip in the 320?

Posted: **Fri Jan 04, 2008 9:43 am**

You should not run a 325i chip in a 320i.

There is a specific chip for the 320i.

Posted: **Fri Jan 04, 2008 7:37 pm**

Nothing for the poor old M40?

Posted: **Sat Jan 05, 2008 3:03 pm**

have you got any chips for the older ecu that doesnt have 28 pins, as i dont like the idea of soldering onto the pcb

Posted: **Sat Jan 05, 2008 3:08 pm**

540 ecu sal??

Posted: **Sun Jan 06, 2008 2:01 pm**

Ã‚£40 with delivery? OR just Ã‚£40+ postage?

Thanks

Posted: **Sun Jan 06, 2008 2:15 pm**

Any for the older ECUs with 24 pins?? '86 325i- 0 261 200 073??

Posted: **Sun Jan 06, 2008 6:41 pm**

Older ECU's will need some light modifications.

Posted: **Sun Jan 06, 2008 6:42 pm**

oze30 wrote:540 ecu sal??

Sorry, not part of the offer.

Posted: **Mon Jan 07, 2008 12:52 am**

Sal, didn't you get my pm's? I'm after the 318is chip please. Car was built 07/90. You need any more info?

Payment, paypal or card over the phone? Also want to talk suspension and remapping with you.

Paul.

Posted: **Tue Jan 08, 2008 1:13 am**

Posted: **Tue Jan 08, 2008 1:14 am**

Ã‚£40 looks like a bargain to me. What do you claim the chip does?

Posted: **Tue Jan 08, 2008 10:28 am**

12 bhp. We did some tests recently on a zoners car and have the dyno sheets if required.

Sheps - I'll be in touch very soon, just settling in after a 4+ week holiday!

Posted: **Tue Jan 08, 2008 6:18 pm**

Sounds good to me.

Posted: **Tue Jan 08, 2008 9:03 pm**

M5pilot wrote:Sheps - I'll be in touch very soon, just settling in after a 4+ week holiday!

Thanks Salman, I will pm you my email address referance our conversation this afternoon

Posted: **Wed Jan 09, 2008 3:13 pm**

Do the chips solder in then? How difficult a job is swapping them over? I might obtain a spare ECU.

Posted: **Wed Jan 09, 2008 3:18 pm**

Not a solder job, direct swap for the chip you have in at the moment. Look in the articles sections for a how to guide

Posted: **Wed Jan 09, 2008 5:20 pm**

ShepsEvo3 wrote:Sal, didn't you get my pm's? I'm after the 318is chip please. Car was built 07/90. You need any more info?

Payment, paypal or card over the phone? Also want to talk suspension and remapping with you.

Paul.

x2!
Mine was built in 04/1990, chassis number AD18560.

Posted: **Wed Jan 09, 2008 6:02 pm**

12 bhp. We did some tests recently on a zoners car and have the dyno sheets if required.

yes please^^^^^

Oversteer
info needed= car/year/ecu number/orig chip number

Posted: **Wed Jan 09, 2008 11:36 pm**

Guide is for the 320/325, I've got a 318iS, but I assume that it's the same.

Personally I think that 12BHP is a bit optimistic, but I shall be finding out soon.

Posted: **Thu Jan 10, 2008 9:30 am**

tomstickland wrote:Guide is for the 320/325, I've got a 318iS, but I assume that it's the same.

Personally I think that 12BHP is a bit optimistic, but I shall be finding out soon.

Pm agreen, he has an IS on which the chip was mapped for, it was rolling roaded at around 12bhp increase with graphs.

Posted: **Thu Jan 10, 2008 3:57 pm**

Does it matter about manufacturing date if I was to use one IS chip on two engines... One engine is a '91, the other is a '89/90

Thanks

Posted: **Thu Jan 10, 2008 3:59 pm**

If the Software number (the number on the chip) is the same then there is no problem. If not then it won't be ideal on one of the cars.

Posted: **Fri Jan 11, 2008 1:41 am**

hongkongfuey wrote:Oversteer
info needed= car/year/ecu number/orig chip number

I've emailed Salman, and ordered it already. Thanks!

Posted: **Wed Apr 09, 2008 9:13 pm**

I bought one of these a few months ago. Still haven't fitted it!

Posted: **Sun Apr 20, 2008 1:01 pm**

Don't be a stick in the mud, get it sorted!

Posted: **Sat Apr 26, 2008 9:17 pm**

Any chance of maybe extending this Ã‚£40 offer to May ?

Posted: **Sun Apr 27, 2008 12:10 am**

FIREBREATHER60 wrote:Nothing for the poor old M40?

+1

Posted: **Sun Apr 27, 2008 6:22 pm**

sorry to hijack, but I sent you a mail concerning a 540 ecu...
Still no reply... Could you look into it, please?
Cheers
Seb

Posted: **Wed Apr 30, 2008 12:09 am**

how much are these normally as i need to buy one!!

Posted: **Wed Apr 30, 2008 10:49 am**

Ã‚£75 inc p&p

Posted: **Wed Apr 30, 2008 12:22 pm**

Missed this, How much are they now?

Posted: **Wed Apr 30, 2008 12:23 pm**

do'h, as above thanks!

Posted: **Wed Apr 30, 2008 12:25 pm**

any chance of some sort of group buy on these?

E30 Zone

Evolve Chip January Offer

Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer

Re: Evolve Chip January Offer