Page 1 of 4
ROLL CAGES 20% discount off RRP *** PRICES POSTED page4***
Posted: Tue Jan 16, 2007 5:16 pm
by Kos
as pet title
ALSO NOW AVAILABLE ARE SAFETY DEVICES CAGES
FOR E30'S WITH OR WITHOUT A SUN ROOF
FULL CAGE, WITH A SINGLE DIAGONAL AND DOOR BARS £600
FULL CAGE, WITH AN X bar (twin diagonals), DOOR BARS AND HARNESS BARS £700
FULL CAGE WITH REMOVABLE DIAGONAL AND DOOR BARS IS £650
prices do not included VAT, AS A GROUP BUY 20% IS AVAILABLE
or for an individaul purchase 10%
supplier is automac
e mail them at
automacgb@yahoo.co.uk reference kos/e30zone
all come with a more comprehensive fitting kit than the OMP cage, and easier to fit , not FIA approved , but they are stronger
with the omp cage, i have found out that they bolt simply to the floor of the car, and door bars you need to weld up yourself
with the safety devises ones , door bars are bolt on and are removalble, and comes with box section to fit the cage to the floor
looking it to this, likely to be a 6 point OMP one with a removable rear diagolal and designed for a non sunroof e30, BUT will still fit with a sunroof ( you wont be able to slide it, just tilt it )
these are good cages, very strong and great for track day cars, with a removable diagonal the rear reats are still usable
the price will be cheaper than deamon tweeks, that i guarantee (they are £355 plus VAT and carridge so comes in at near £450)
guaging interest at the momont, will need to have 5 cages at least to get any significant spice saving
if any one is after just a rear section this could also be possible
any questions just ask
regards kos
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 6:08 pm
by ajm-e30
il defo have one of these
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 6:14 pm
by georob
I'd be interested, money allowing when it pulls off
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 7:27 pm
by m-dtech
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 7:34 pm
by dips346
put me down for 1
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 7:43 pm
by m-dtech
if you can get below £350 delivered then i'll take one.
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 8:02 pm
by camshaft
I'm interested as well.
Re: ROLL CAGE
Posted: Tue Jan 16, 2007 8:49 pm
by Kos
£319 plus VAT comes to £375 shipping is extra fella (and a fair bit as well if you can find a courier to entertain it LoL)
but that is the same cage i'm looking at, but with a better price

Re: ROLL CAGE
Posted: Tue Jan 16, 2007 9:03 pm
by Kos
the cage part number is AA104P17
SPEC is
6 POINT BOLT IN WITH FITTING KIT
FIA approved
Removable diagonal (rear seat still useable)
Comes with door bars
Fits infront of the dash (easier fitting)
Weight ( still not sure )
will have a price with in a few days
Re: ROLL CAGE
Posted: Wed Jan 17, 2007 2:43 pm
by m-dtech
Kos wrote:
£319 plus VAT comes to £375 shipping is extra fella (and a fair bit as well if you can find a courier to entertain it LoL)
but that is the same cage i'm looking at, but with a better price

need to find out their postage costs
Re: ROLL CAGE
Posted: Wed Jan 17, 2007 10:09 pm
by topi
I'd also be interested dependant on the all inclusive costs.
Re: ROLL CAGE
Posted: Thu Jan 18, 2007 9:10 am
by m-dtech
spoke to them yesterday, and if we can confirm numbers then postage is £1
depending on how many agree then there may be a chance of anything up to 10% discount.
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 12:57 am
by Kev-G
Hi,
My name is Kevin Gordon, and I co-own a company called Crombie Carversion Company. We specialise in engine conversions and track-day preparation (our 205 featured on the front cover of Practical Performance Car Nov 2006 issue). Due to this we deal in OMP products, specifically roll-cages.
I can offer the following:
BMW E30 6-Point Roll Cage (AB/104P/17) for £335 fully delivered
Cages are shipped direct from OMP and the leadtime is approx. 4-6 wks.
The full OMP range can be found here:
[/url]
http://www.ompracing.it/en/homeen.htm?c ... age=en[url]
Please post here or send an e-mail to
crombiecraversionco@hotmail.com with any enquires.
There is an imminent price increase from OMP (approx. £15/£20), but I will hold the above price until the end of February regardless.
Thanks for taking the time to look - I hope that this is OK with the Mods....I was just going to send an e-mail asking if it was OK to place Trade Adds when I noticed this. Please remove if there is an issue.
Regards,
Kevin.
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 12:31 pm
by Kos
Kev-G wrote:
I can offer the following:
BMW E30 6-Point Roll Cage (AB/104P/17) for £335 fully delivered
Cages are shipped direct from OMP and the leadtime is approx. 4-6 wks.
from what i have worked out, omp will deliver only to 1 address, usually an authorised supplier. please clarify the above gordon ??
also, i'm sure OMP have strict rules on what you can sell you cages for ?? i do belive it is about £350 plus vat ??
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 12:35 pm
by Kos
the OMP cages i can get are £350 plus delivary or can be collected.
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 12:49 pm
by Kos
ALSO NOW AVAILABLE ARE SAFETY DEVISES CAGES
FOR E30'S WITH OR WITHOUT A SUN ROOF
FULL CAGE, WITH A SINGLE DIAGONAL AND DOOR BARS £600
FULL CAGE, WITH A X (twin diagonals), DOOR BARS AND HARNES BARS £700
all come with a more comprehensive fitting kit than the OMP cage, and easier to fit , not FIA approved , but they are stronger
with the omp cage, i have found out that they bolt simply to the floor of the car, and door bars you need to weld up yourself
with the safety devises ones , door bars are bolt on and are removalble, and comes with box section to fit the cage to the floor
my self i will be having the safety devises cage
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 5:26 pm
by camshaft
Kos, I'm a bit confused. I'd like the £210 sunroof version cage, but will this be delivered to my door or will I need to pick it up from you? Is Kev-G suppling the cages you started this thread for? Who am I paying the cash too?
Sorry if I'm being a bit dim here.

Re: ROLL CAGE
Posted: Fri Jan 19, 2007 6:54 pm
by Kos
camshaft wrote:Kos, I'm a bit confused. I'd like the £210 sunroof version cage, but will this be delivered to my door or will I need to pick it up from you? Is Kev-G suppling the cages you started this thread for? Who am I paying the cash too?
Sorry if I'm being a bit dim here.

kev-G has nothing to do with this !!
sfaety devises cages prices do not include VAT, but i am negotiatiing a discount and working on delivary prices
Re: ROLL CAGE
Posted: Fri Jan 19, 2007 10:11 pm
by Kev-G
Kos,
Apologies, didn't want to piss on your parade - Bad start. I thought that you were exploring the options on prices and that I could add to this - Please feel free to ask the Moderators to remove my posts.
To answer your questions:
All our cages come from OMP as we don't hold any stock in this Country - Leadtime is therefore 4-6 wks.
Recommended Retail Price is currently £333.40 on the AA/104P range. We are effectively selling for this price and absorbing the VAT and carriage. Less profit....
Again, apologies.
Kevin.
Re: ROLL CAGE
Posted: Sat Jan 20, 2007 9:59 am
by H35-IAN
when are you ordering the cages kos m8 ? i want one of these myself for spring but if it means ordering early to save money sure we can sort something i want the back bar and the bars that come down to the harness! bolt in

Re: ROLL CAGE
Posted: Sun Jan 21, 2007 12:46 pm
by Kos
the one you are after ian is what i'm going for, mine will be turning up any daw now so once i hvae pictures of it i'll post them
Re: ROLL CAGE
Posted: Sun Jan 21, 2007 12:49 pm
by Kos
Kev-G wrote:Kos,
Apologies, didn't want to **** on your parade - Bad start. I thought that you were exploring the options on prices and that I could add to this - Please feel free to ask the Moderators to remove my posts.
To answer your questions:
All our cages come from OMP as we don't hold any stock in this Country - Leadtime is therefore 4-6 wks.
Recommended Retail Price is currently £333.40 on the AA/104P range. We are effectively selling for this price and absorbing the VAT and carriage. Less profit....
Again, apologies.
Kevin.
no worries
at that price its good, my supplier cant really afford to absorb too much of the cost, but he can get a good deal on safety devises
having seen both, i'm going for SD simpler and stronger
basicaly i can get anything above in the previous posts
Re: ROLL CAGE
Posted: Sun Jan 21, 2007 7:47 pm
by topi
Kev-G:
The OMP cages you sell, does it come with a rear diaganol, and is it bolt-in or weld in like the door bars?
Also, doesn it go through the dash or around it?
Cheers.
Re: ROLL CAGE
Posted: Mon Jan 22, 2007 12:10 pm
by Kos
topi wrote:Kev-G:
The OMP cages you sell, does it come with a rear diaganol, and is it bolt-in or weld in like the door bars?
Also, doesn it go through the dash or around it?
Cheers.
omp have removable rear diagonal, front part of cage sits infront of the dash and door bars need to be cut and welded in
Re: ROLL CAGE
Posted: Mon Jan 22, 2007 2:10 pm
by camshaft
Thanks Kos for clearing that up, looking forward to getting a cage in.

Re:
Posted: Tue Jan 23, 2007 11:34 pm
by jonb

this is cool.
Re:
Posted: Wed Jan 24, 2007 12:21 am
by JimmyC
Back to the cages,
Why is the SD cage no longer FIA approved??
Is it the cage with legs to front and rear struts?
Re:
Posted: Wed Jan 24, 2007 2:20 pm
by Kos
not sure why its not FIA approved, i think its some thing that happened last year when they changed owners
the cages i was going for a 6 point bolt in, they do not triangulate to the struts
they cage is still approved for use in the rwd challange and khumo championship i belive
Re:
Posted: Wed Jan 24, 2007 6:00 pm
by Ant
all Off Topic Posts now removed, on topic only please peeps, and good luck with this venture

Re:
Posted: Wed Jan 24, 2007 6:03 pm
by m-dtech
Kos, what was the best price you got on the OMP ?
I have found another source that can do the OMP for £300, inclusive of VAT and delivery

Re:
Posted: Wed Jan 24, 2007 6:07 pm
by Kos
i've not relly bothered too much due to whats invoilved with the fitting, but let us know where you can get it from
Re:
Posted: Fri Jan 26, 2007 8:45 pm
by bmwscorpion
Kos are you still getting a group buy together, I would be interested in a discounted cage, I have had safety devices in the past, excellent everything about it was spot on, If your still sorting this please keep me in mind,
I went to the Autosport show just to pick a SD cage up with discount (like I did last time I bought one) but they didnt go, gutted
I used to sell OMP cages, they were never painted and often had service rust on them. and the fitting was far from straight forward, but once its painted and in they are OK,
Im with SD all the way.
Please keep me informaed Kos.
Re: ROLL CAGE
Posted: Sat Jan 27, 2007 3:52 pm
by Kos
right people, the deal is if i can get to as near to 10 guaranteed buyers for a safety devices cage a 20% discount will be on offer
RRP on full cage with an X bar in the back, harness bars, door bars is £700 PLUS VAT comes to £822.50
including VAT as a group buy, cage will be £658 a saving of about £160
a turn around from day of ordering is between 4-6 weeks
a slightly cheaper alternative is a cage ith single diagonal, will have exact price on that monday but i do recall it being £600 plus VAT, so with discount will be £564 inclusive of VAT
cages can be for a sunroof on non sunroof e30, and in all cases sits infront of the dash, and come with a complete fitting kit
names on list please
PLEASE NOTE:
everything is subject to final agreement but i'm confident that all will be fine
1: kos
Re: ROLL CAGE
Posted: Sat Jan 27, 2007 8:03 pm
by Cabrio
SafetyDevices were at the Autosport show...they were near the constructors Pavilion...on the Rallyschool.co.uk stand....may have missed it...had an MGZR on display and also a multicoloured mini cage...they will be a the Historic Motor Show later this year...a must if you are in to old cars...will be a Group B rally car display
Good luck Kos...well done for keeping going..for the good of the zone
Re: ROLL CAGE
Posted: Sun Jan 28, 2007 1:46 pm
by Milko
I'm a fter a cage but is the SD cage really worth nearly twice as much as the OMP.....?
m-dtech - any more news on your source for the OMP?