E30 Zone

I have come across a company that makes some nice gauge holders for the E30... So if anyone who is interested in these maybe we can get a group buy going.

M000113 BMW E30 3 Gauge holder (replaces the ashtray) This mounts in place of the existing ashtray and uses the same hardware. It looks very factory and holds 3 2/1/16 " Gauges. (Painted Flat Black) $37.00


M000113L BMW E30 3 Gauge holder (replaces the ashtray) - Covered In Black Leather. This mounts in place of the existing ashtray and uses the same hardware. It looks very factory and holds 3 2/1/16 " Gauges. $45.00


M000114 BMW E30 2 Gauge holder (replaces the ashtray) This mounts in place of the existing ashtray and uses the same hardware. It looks very factory and holds 2 2/1/16 " Gauges (Painted flat black ready for you to finish) $37.00


M000114L BMW E30 2 Gauge holder (replaces the ashtray) - Covered In Black Leather. This mounts in place of the existing ashtray and uses the same hardware. It looks very factory and holds 2 2/1/16 " Gauges. $45.00


M000115L BMW E30 2 Gauge holder w/ 12 volt plug (replaces the ashtray) -Covered In Black Leather. This mounts in place of the existing ashtray and uses the same hardware. It looks very factory and holds 2 2/1/16 " Gauges. (Comes with 12Volt Plug installed) $65.00


M000138 E30 3 Gauge holder (replaces the ashtray) Holds three 2 1/16" round gauges. The Angle Rings are included - Covered in Black Leather. RIGHT HAND DRIVE $65.00



I have not contacted the company yet as I wanted gauge some interest first... All prices are US and im guessing dont include shipping... If we get enough people maybe we can get a nice discount.. They also sell gauges aswell.

Mike

I'd be interested in the 3 gauge painted black one.

Ok we have three.

1# m_jermyn
2# pac1982
3# CeaserBob

Anyone else?

I will put my name down for an M00013 please

Regards Eddie

Ok we have three.

1# m_jermyn
2# pac1982
3# CeaserBob
4# Eddie25

could i please have a M000115L BMW E30 2 Gauge holder w/ 12 volt plug
cheers
Ben

why does no one do a hartge style one for a RHD

Ok we have five.

1# m_jermyn
2# pac1982
3# CeaserBob
4# Eddie25
5# Fowler

OK I have just emailed the vendor letting him know we have a number of people interested in his products..

will keep you all updated..

Mike

m_jermyn wrote:Ok we have five.

1# m_jermyn
2# pac1982 M000113
3# CeaserBob
4# Eddie25
5# Fowler

I've added the item code for the one i'm after, may be wise for everyone else to do the same

I had a look at the complete kits - gauges/pods/senders etc. Are they good value or would I be better off sourcing the bits separately?

I think the kits with everything in them are good value, I bought a oil pressure gauge and it was more expensive then thir prices ... The only problem is I want my gauges to real in celsius not fahrenheit..

Mike

At this time I have not heard anything from the seller of these gauge pods... Will update the minute I do

1# m_jermyn
2# pac1982 M000113
3# CaeserBob M000113
4# Eddie25 M00013 ??
5# Fowler M000115L

Code added.

I may also be interested in the full kit with gauges too. Not fussed if oil temp is in F.

1# m_jermyn M000115L
2# pac1982 M000113
3# CaeserBob M000113
4# Eddie25 M00013 ??
5# Fowler M000115L

m_jermyn wrote:1# m_jermyn M000115L
2# pac1982 M000113
3# CaeserBob M000113
4# Eddie25 M000113
5# Fowler M000115L

Sorry edited

I just got off the phone with mark at parkour performance and he is happy to post international... I have sent him a follow up email .

Will keep this updated as I get more news.

pm on its way

Ok Mark at Parker performance LLC has got back to me with a quote for you UK guys...

Postage to your part of the world would be US$12..

I mentioned a group buy to him but he did not bite and offer a discount.

The website is http://www.parkerperformance.com Mention to him you are for E30zone in a email.

Mike

I mentioned a group buy to him but he did not bite and offer a discount.

I would love one of the M000113 but what a shame they will not take part in a group buy .

I am going to try and make my own instead !

I tried making my own and it failed, it looked ok but was not up to the standards you see above...

my car is a track car so it doesnt have to look pretty but I will try and make it decent anyway of course because I'm fussy !

Cant be too hard ? Surely its just a sheet of folded metal with some holes drilled ?

Will

I didnt want to drill holes in my car..


More news......... He does offer group buys so I will be passing on the orders... Will update

In that case !

1# m_jermyn M000115L
2# pac1982 M000113
3# CaeserBob M000113
4# Eddie25 M000113
5# Fowler M000115L
6# Driftnething M000113

Ok he has agreed on a group buy, I got this email from him..


Mike,


Here is what I can do. If you and the 4 other all order will ship for a price. Everyone orders when I ship them out I send you refund for shipping Via PayPal.

How does that sound? That will be 6 dollars for every UK person and 7.50 for you. For a total savings of 31.50


So are we all ready to hand over the money?

yup

Me too so that is 2 people 4 more to go

Any idea how to get his paypal addy of his website?

Mike

Payments are to be made at Payments@ParkerPerformance.com for paypal...

Obviously explain it a group buy from E30zone.net

I forgot all about this ! Has anbody bought one ?
Will

i used to make them

if you want i can get a batch made up

yes please

if there are 5 people interested i'll do them. it will be about £30-£40 posted.

they will all be powder coated black and hold 3 gauges

1.shabalake

1.shabalake
2. andy523