Page 1 of 2

Rear camber adjustment plates, complete, now posted

Posted: Thu Mar 26, 2009 6:57 pm
by DanThe
For anyone that missed out on the first batch or cant wait for it to be sorted, I have been and priced some up at a local machinists, no messing about, you pay me, I pay them and post them out to you.
Price is £46 inc postage for the 8 tabs needed

They will be made from 8mm flat plate and machined to the required dimensions

Image

Need 10 people to get it going as there are minimum orders to stick to and I dont fancy paying £10 per tab so I can have a set all to myself!

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Thu Mar 26, 2009 8:27 pm
by mccarthy
IN - but still not quite sure how these work!? any pics of it fitted and with the trailing arms in place? what this eccentric bolt thing you need? and how much camber do they give at the rear? again pics would be nice :D

1.mccarthy

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Thu Mar 26, 2009 9:20 pm
by DanThe
You can use them to increase or reduce camber, most use them to correct the camber back to factory standards after lowering, have a look at Ians thread http://www.e30zone.net/modules.php?name ... ber+adjust

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Mar 27, 2009 11:39 pm
by Bob_S
1. dan
2.mccarthy
3. bob
4. ? - it could be you!

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Mar 28, 2009 12:49 am
by juniorGT
1. dan
2.mccarthy
3. bob
4. JuniorGT

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Mar 28, 2009 8:53 am
by DanThe
These will be ready in about a weeks time from the date I place the order 8)

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 1:42 pm
by DanThe
So where's all the interest gone :? :? :? :?

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 7:54 pm
by nickso
think a lot of folks would like to see how the the other lot pans out. ive given up hope of fitting mine this year as my beam should be going back on next month.

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 8:34 pm
by DanThe
It doesnt look like anything will come of the others, I wont be fitting mine and I cant see a refund being offered....

Ive pm'd anyone who looked like they missed the last GB, but not enough interest yet. Only need 10 of us to get this going.

Like I posted above, wont be much over a week to have them made and ready to be shipped out.

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 10:14 pm
by nickso
how long are you willing to wait before you give up on getting ten orders? im interested but dont want to throw another £50 if i have even a remote chance of getting the other lot remade.

would be handy if we knew the definitive answer with the original batch.

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 10:26 pm
by DRIFTBOY
nickso wrote:how long are you willing to wait before you give up on getting ten orders? im interested but dont want to throw another £50 if i have even a remote chance of getting the other lot remade.

would be handy if we knew the definitive answer with the original batch.
I was about to say the smae thing!
I can't afford to 'write off' £60! :cry:

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Tue Mar 31, 2009 10:51 pm
by DanThe
Well in that case Jhonno needs to come up with some answers, not much happening at present!

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Wed Apr 01, 2009 8:44 am
by mike_sayer
Agree with nickso and driftboy - just waiting to see what happens with the other GB. If it does finish going tits-up, i'll be in...

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Wed Apr 01, 2009 9:18 am
by winx
and again here, would like to try and get something in return for the money already paid :?

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Thu Apr 02, 2009 12:03 am
by tomson
1. dan
2.mccarthy
3. bob
4. JuniorGT
5. Tom

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 03, 2009 12:36 am
by DanThe
Good stuff tom, just another 5 to go 8)

Get your names down! :D

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 03, 2009 7:40 pm
by caneswell
1. dan
2.mccarthy
3. bob
4. JuniorGT
5. Tom
6. Caneswell

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Apr 04, 2009 6:23 pm
by scaraveos
Price shipped to Greece?

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Apr 04, 2009 10:50 pm
by DanThe
It will be no more than £5 extra mate, thats for "International Signed For" so you can be assured of receiving them 8)

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Thu Apr 09, 2009 10:44 pm
by DanThe
Im going to order these next week, the remaining 4 sets will be going on eBay where they will hopefully be snapped up pretty quickly.

I will pm everyone with payment details in a moment, will you please try and get the money over before Tuesday as that is when the order will be placed 8)

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 10, 2009 1:39 am
by nickso
fuck it, i cant wait anymore. stick me down for a set. ill pm you too.

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 10, 2009 9:05 am
by mccarthy
do these come with the eccentric bolts? if not can you do them with them or let us know part numbers please?

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 10, 2009 9:28 am
by tomson
Money sent Dan :D

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 10, 2009 9:32 am
by DanThe
Cheers tom :thumb:

1. dan
2.mccarthy
3. bob
4. JuniorGT
5. Tom - paid
6. Caneswell - paid
7. nickso - paid

I can get the eccentric bolts, but you could probably get them cheaper with postage from Cotswolds

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Fri Apr 10, 2009 3:03 pm
by DanThe
Ive just dug this out of the Genuine Parts section
4 of 33321095102 ECCENTRIC BOLT M12X1,5X98 £14.71 for 4
4 of 33326760668 SELF-LOCKING COLLAR NUT £1.24 for 4
4 of 33321092310 ECCENTRIC FLAT WASHER £4.93 for 4


Prices inc. VAT delivered to mainland UK

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Apr 11, 2009 11:45 am
by mike_sayer
I'm in Dan. Will send money later today.

1. dan
2.mccarthy
3. bob
4. JuniorGT
5. Tom - paid
6. Caneswell - paid
7. nickso - paid
8. mike_sayer

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Apr 11, 2009 1:41 pm
by DanThe
Excellent 8)

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Sat Apr 11, 2009 11:29 pm
by DanThe
1. dan
2.mccarthy
3. bob - paid
4. JuniorGT
5. Tom - paid
6. Caneswell - paid
7. nickso - paid
8. mike_sayer- paid

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Mon Apr 13, 2009 11:52 pm
by juniorGT
1. dan
2.mccarthy
3. bob - paid
4. JuniorGT - paid
5. Tom - paid
6. Caneswell - paid
7. nickso - paid
8. mike_sayer- paid

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Mon Apr 13, 2009 11:59 pm
by DanThe
1. dan
2.mccarthy
3. bob - paid
4. JuniorGT - paid
5. Tom - paid
6. Caneswell - paid
7. nickso - paid
8. mike_sayer- paid

Thanks Josh 8)

Just waiting on mccarthy now :wink:

Posted: Wed Apr 15, 2009 4:04 am
by Dave_M3
Could have done a group buy on these;
http://cgi.ebay.de/BMW-E30-M3-E36-Z3-Hi ... 240%3A1318

expensive however!:eek:

Re:

Posted: Wed Apr 15, 2009 7:15 pm
by DanThe
Cant see him selling many of those!

Re:

Posted: Thu Apr 16, 2009 9:19 am
by odbod
Dan,

Can I get in on these?

Re: Rear camber adjustment plates, *New Batch New Price*

Posted: Thu Apr 16, 2009 9:36 am
by DanThe
You certainly can :D

1. dan
2.mccarthy
3. bob - paid
4. JuniorGT - paid
5. Tom - paid
6. Caneswell - paid
7. nickso - paid
8. mike_sayer - paid
9. odbod - paid

Posted: Thu Apr 16, 2009 9:48 am
by odbod
woohoo PAID :cool: