E30 Zone

I'm looking to get an original alpina 268/268 cam i've got copied. Mainly for my 2 cars but seeing as they are NLA now and M20's are not getting any newer i thought i'd see of there is any interest.

I've already got 1 price but i think it's a little high, so i may try another place

3 or more cams 365 each, the price won't drop even if there are 10 ordered.

These ones would be ground from new blanks i'm not looking at getting reprofiled stuff

I could also sort out the correct ECU for these in 2.5 or 2.7 form

Certainly if these bits were fitted to a good 2.5 lump you would gain a genuine 15-20 bhp over stock and not lose all the low end torque in the process either

So anyone interested?

Is this for originality Si?

Or is a 273 CATCAM a lot more 'cammy' and not what you are after?

originality really, the 273 is cammy with mega valve lift. Certainly is in a 2.5 anyhow

I don't want dramas with remaps and piggy backs etc when i've got a cam and ecu matched together which will give a proven result

I'm not expecting a mega response but worth a go!

Fair play.. Trevor not interested...?

Hi,

I'd be interested in one of these cams for a 2.7. Not looking for anything too big so these would be ideal if the price could be lowered.

Cheers.

i'll keep working on this, i just need to get the cam back and take it elsewhere. I'll update when i've got another price for us all

Cool

id be interested in this for my 2.5, depending on the price

did any ever get made up?

no there was no real interest i've still got all the bits for later possibly

ah ok, i'll keep an eye out on here or maybe you could pm me if it goes ahead in the future,
cheers