E30 Zone

Anyone interested in a group buy?

Made from 2.5mm thick steel, just add your own e39 eccentric washers and bolts from BMW.

Looking to get some made up, currently £64 for all 8 tabs however the price drops "significantly" for 5 or 10 people.. They are coming back to me with a quote.

£55.20 Inc VAT with a little added for postage, with the bolts works out about £75. IE's kit will cost you around £160 by the time it reaches your door

Names below..

1. Jhonno

could we have just camber plates if we didnt want the toe plates

Dan

Have you got the costs worked?

If they work out a lot cheaper than the IE ones.~Put me down for a set.


O/T

Was that link for the brake disks helpfull??

bodger wrote:could we have just camber plates if we didnt want the toe plates

I assume you could just sell the other half set to someone else interested.

Jhonno I'm in depending on price. Can you confirm if BMW have the eccentric bolts though Kos and I had a right mare trying to get hold of them 6/7months ago.

The bolts etc aren't expensive.. Haven't checked availability, sure they will be available

I am waiting for them to get back to me with the Group price still..

Anyone know how much the IE kit works out at? They are very expensive on postage.. Wanted $73 to ship some similar items

Ideally everyone would get full sets, but if there are enough then I guess we can talk camber only

Dave - Yeah it was cheers, sorry, completely forgot to reply, been looking too much at rear kits..! Much appreciated

1. Jhonno
2. Bad Dave
3. March109
4.

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5.

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5. Chriskkk (depends on price)

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5. Chriskkk (depends on price)
6. DanThe


I take it these are milled from 5mm steel?

2.5mm as per Ian's setup. Thicker than the standard mountings anyway

I'd be up for a set of these.

Anyone got any fitting instructions or a link to a how to?

And rotated 90 degrees for camber..

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5. Chriskkk (depends on price)
6. DanThe
7. shorty73

Roll up roll up kids! Looking to get this done asap, so won't be hanging around with it

I'm in as long as the price is right!

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5. Chriskkk (depends on price)
6. DanThe
7. shorty73
8. mike_sayer

They should hopefully get back to me today..

1. Jhonno
2. Bad Dave
3. March109
4. gcs325i
5. Chriskkk (depends on price)
6. DanThe
7. shorty73
8. mike_sayer
9. Winx - (depending on price)

Has anyone got the part numbers for the bits from BMW, would like to see if they are available and at what price.

11 ECCENTRIC BOLT M12X1,5X98 - 33321095102 $8.26
12 SELF-LOCKING COLLAR NUT M12X1,5-10 ZNS3 - 33326760668 $0.56
13 ECCENTRIC FLAT WASHER - 33321092310 $1.80

Just ordered mine.. Will be here Thursday apparently

You need 4 off each

Prices from Sytner Sunningdale are:

11 ECCENTRIC BOLT M12X1,5X98 - 33321095102 £3.64 each
12 SELF-LOCKING COLLAR NUT M12X1,5-10 ZNS3 - 33326760668 £0.29 each
13 ECCENTRIC FLAT WASHER - 33321092310 £1.22 each

11 - 21 in stock at Bracknell
12 - Loads in stock
13 - 60 in stock Bracknell

Will get them ordeed once I hear back on the price of the plates

11- 17 in stock
12 - Loads -4 in stock
13 - 56 in stock

Just rung the place, they will be getting back to me shortly. The dude who was quoting me is just at the tool shop

They know me far to well there now
Me: Hi it's Henry
BMW: Hi mate, is it for the 335 or the 525ix?
Me: 335 but want E39 parts
BMW@ WTF are you doing now
Me: Adjustable stuff on the rear beam

funny how we are owned partly by Mercedes but manage to get trade price on BMW parts!

I get the same from my BMW parts counter, ordering all sorts of weird an wonderful things. Even the GM of the dealership knows of my car

£55.20 inc VAT for 10 off

The original £64 was +VAT apparently..

So nearly £20 cheaper for a set with everyone in..

Should work out about £75 all in for the camber adjustment 'kit' with the bolts etc

Let me know and I'll get them ordered, even if you order now and fit at a later date

With the cost of postage for the IE kit I reckon this must def be cheaper! Cant imagine it costing much to post them out

Also if anyone is interested I enquired about strengthening tabs for the rear arb mounts on the arms, and will be asking about front subframe arb mount strengthening plates, again like the IE setup

I'll definately have a set then please!

Cool, just need others to confirm and I'll order!

Well delivered the IE kit works out around £160 so this is less than 1/2 the price fellas

Just to continue chatting to myself I shall leave this up till the end of the week, when I will place the order either Fri afternoon or Mon morning, so still time to get in guys.

I'm in.

And interested in the strengthening plates.

Put me down for a set then Dan

Still wanting a set as well

So £75+post and you source the bolts? or £55.22+post and order them my self?

I'm interested and know of someone else who's looking for a set

I'll definitely take a set too please Jhonno