E30 Zone

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

if you can do it for 15"wheels ...280mm.. as a package..

shouldnt be a problem, if i get the interest and get my head round the caliper brackets

What wheel sizes would the TT brakes fit/not fit?

defiently fit 17", unsure about 16's i may be able to squeeze them under my 16" compomotives but will have to find out....

If they fit under 16's which I have and am quite fond of then I'm game

Phill172 wrote: they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

sounds expensive to me, who manufactures the disc?

I might be interested in this as I will be in the market for a brake upgrade in the new year, depends on the cost....

im interested also - what options are there on caliper?

The way im working on it is basically Im going to look into the 280mm set up first that saying really shouldnt take to long!

For a 280 set up, i believe, correct me if im wrong the Mazda 4 pots from a RX7 can be used....

Also have been told the 406 coupe/fiat coupe Brembos are all the same, and will accomendate the 312mm discs...
So thats basically what I am aiming to be able to provide disc and cailper adaptors so all you simply have to do is find the calipers

280mm set up, you can get discs for around £50

312mm discs just fit under 16" Borbet B's and Alpina 7Js

the 280mm discs are from a golf G60 iirc.

I'd suggest the brembo 4 pots are a non starter though due to the sheer bulk of the things, 750 sliding single pots require a bit of surface grinding to fit and leave a 4mm gap between wheel and caliper with new pads and discs fitted, thats with wheels of the correct offset btw and no spacer required.

You can buy the Audi discs with all the bolt holes already from numerous suppliers.

Phill172 wrote:I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

^ Looks like a ATE Disk to me.

Just buy the brackets from 300mm.de which are TUV approved and get on with it!

Andrew

IM in on this if its still on i have the calipers just need the tt discs and adaptors.

dcoeinside wrote:

Phill172 wrote:I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

do you have a link to where those rotors can be purchased?

this still happening?

dcoeinside wrote:

Phill172 wrote:I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

Interesting stuff!

I guess the man who is going to manufacturethe biggest kit for BBS 15" wheels would earn a lot of money!

rhett325i wrote:

dcoeinside wrote:

Phill172 wrote:I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

do you have a link to where those rotors can be purchased?

+ 1

Need to sort discs for my new brakes

the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

Phill172 wrote:they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Are they genuine audi discs???

I'm sure i've heard (from a reliable source i think, just can't remember who/where!) that the genuine discs are lighter than all the others available, that are 'the same'!!!!

I'm sure the genuine audi discs were more than that from a dealer when i checked last year!!!

If they are genuine, i might be interested in a few months!! Can't commit at the mo though!!

Bob_S wrote:the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

Dave_M3 wrote:

Bob_S wrote:the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

which ones as they are damn tight on 16's?!

Bob_S wrote:

Dave_M3 wrote:

Bob_S wrote:the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

which ones as they are damn tight on 16's?!

Saw a set of Revolutions on a track car for sale recently and it had Brembos and Audi dics but thinking back now I think they were only 300mm.

fiat coupe brembos wont fit on 15", 16" as standard have 3mm clearence between alloy and caliper. thats std alloys.

they are 305mm discs with 4x98mm.

ive a fiat coupe aswell as the 325i,2nd hand brembos fetch between £100-£150 and a refurb kit is about £40 for seals etc.

will they fit 17", the fiat brembo's? how much are the 312mm discs and adaptors?