E30 Zone

Would there be any interest in a group buy here for these?

So far we only ship in the USA but If there is enough interest we will work something out.

We have it made in small runs of specially formulated EDPM in order to suit the conditions IE heat, UV, oil resistance etc. the reason being was that the OE product would harden and cause hood closing issues and also the rubber would degenerate rapidly and the off the shelf products were just as bad.



Entwicklung Dreißig Zen II E30 HOOD SEALS are constructed in the USA from 100% High performance EPDM rubber. The seals fit between the hood and the fender. This seal completely covers / seals the space between the hood and the fender for better aerodynamics. [/FONT]

Trunk Seal Images


Here are some larger images of the hood seals



BMW E30 Performance Chassis Specialists

I'd be interested in a set of both.

Possibly the hood seals depending on price!!!

What sort of cost would we be looking at and how many people would be required to get a good price??

Hmmmm....hood seals would be worth a look


as above ....Price!!

interested dpending on price for bonnet/hood ones.

Same as the above's! But intrested in bonnet ones.

they are $46 each on his site plus shipping...trunk ones for me

I assume everyone is here from the UK, what if one of you looks into postage cost from here to the UK. The shipping weight is about one Lbs each set (Hood and Trunk (bonnnet and boot))

I could send one shipment to one of you and you could distribute them?

Here is an example of a group buy on these combination boot and bonnet kits:
http://www.r3vlimited.com/board/showthread.php?t=109023

How much to ship to here each, or both, individually and how much for 10+ as the other thread on r3vl + how much discount would a bulk buy give us

DaveD wrote:How much to ship to here each, or both, individually and how much for 10+ as the other thread on r3vl + how much discount would a bulk buy give us

I will do 10+ Boot and Bonnet kits for $62 US per kit shipped in bulk to one address.

I wouldn't really want to deal with shipping each individually ( customs paperwork gives me brain damage...Or at the very least make the damage I already have worse)

its a good price folks the front evo ones from the stealers are £30 =

but who wants to organise it..................

by the way does that include the shipping costs?

Im in if we get someone to organise it

1. Eko

ditto... but I only want the trunk seal...if someone wants a bonnet only?

1. Eko
2 Daved (trunk only)

DaveD wrote:ditto... but I only want the trunk seal...if someone wants a bonnet only?

1. Eko
2 Daved (trunk only)

Dave Benjy has got a touring so boot is no good to him anyway.

Yep, I'll take a bonnet set. Cheers

I'll try organise something similar to Ireland like we were talking about on R3v

1. Eko
2 Daved (trunk only)
2Benjy (Bonnet only)

1. Eko (full kit)
2 Daved (trunk only)
2Benjy (Bonnet only)

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)

You can reach me here: daniel_colegrove@sbcglobal.net

or form mail me from the site: http://www.bmwzenperformance.com/contact.html

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)
6. SHAKEELE30 (full kit)

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)
6. SHAKEELE30 (full kit)
7. MtechMart (full kit + 1 extra hood/bonnet set).

How is payment sorted and who will keep track and take collection etc?

Sorry for sounding thick guy's, but what is the price in £'s for the kit (and individual)

depends on the exchange rate but its ABOUT $62 / 1.97= £31.50 plus post and maybe customs and if you want 1/2 you would have to match with someone who wanted the other bit

Dave...count me in for a bonnet set for the race car...cheers...has anyone tried these yet...see they also do other BMW parts

Customs is easy to get by- they just put 'prototype samples' on the export form of no value.

as long as they dont get lost...

Are they going to one person or everyone individually

nobodies volunteered yet but that's the idea

Perhaps someone who is equidistant from everyone?

Dave...you can do the North....if it is as good as it looks it will sell to the racers

i couldnt see if anyone asked this already but how do you fit them? are they adhesive?

self adhesive ..at least the oem one is

DaveD wrote:self adhesive ..at least the oem one is

cheers mate!