subframe bracket bolt
Posted: Thu Nov 19, 2020 9:02 am
i need one hex bolt that goes in the rear bracket that holds the subframe up, if anyone has one.
Page 1 of 1
Re: subframe bracket bolt
Posted: Thu Nov 19, 2020 6:05 pm
The splined bolt? What goes up through the floor?
Re: subframe bracket bolt
Posted: Fri Nov 20, 2020 6:20 pm
No, it’s the subframe bracket. One on each side, has the big bolt goes through it and then 2 bolts go in from the side, through the body.
Re: subframe bracket bolt
Posted: Fri Nov 20, 2020 7:31 pm
Is it a saloon or cabriolet
Re: subframe bracket bolt
Posted: Fri Nov 20, 2020 10:33 pm
Saloon. Are the bolts not the same on all e30s. It’s the small m8x22, Allen key head, 2 on each side ones
Re: subframe bracket bolt
Posted: Fri Nov 20, 2020 10:37 pm
Re: subframe bracket bolt
Posted: Fri Nov 20, 2020 10:58 pm
If you have hex headed bolts on your car, then you already have the wrong bolts fitted, not that it matters much.
M8 x 20 ish cap bolts are readily available from many sources. I'd include a washer under the head when fitting them.
M8 x 20 ish cap bolts are readily available from many sources. I'd include a washer under the head when fitting them.
Re: subframe bracket bolt
Posted: Sat Nov 21, 2020 10:44 am
That’s what I was confused about, on realoem it says inner hex bolt, when I’ve searched for that, it comes up with different types of bolts from what I’ve got already.