Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...
Moderator: martauto
Which pattern?Woody86 wrote:Do you have a whole rear seat and seat belts in grey cloth for a coupe
Yes they're still available.Iamrob wrote:hi, still have the coilovers in 51 struts? pics of mtech 2 skirts?
thanks
rob
and
Complete set

or if it's just the skirts you want, these ones

The RealOEM pic for that is useless. Is that the black strip running along the sill-top and covering the carpet edge?
black rubber trim? got one.Type15 wrote:It's this one here, the clips are still there but the trim disintegrated.
[/img]
Jim, none in that colour at the minute.
£24 inc courier (mostly the courier!)
Not currentlyWitit wrote:do you have m42b18 complete set?
£36 postedJo3ly wrote:am looking for a power steering pump for my 1991 316 if you have one in good working order?
The one on the side mounted to the glass you mean?gaszman wrote:do you have a e46 touring aerial the small dumpy one cheers
None there on any of ours.
-
gaszman
- E30 Zone Meets/Events Team

- Posts: 3111
- Joined: Wed Jan 03, 2007 11:00 pm
- Location: Outside of Scummerland !
sorry mate just found out the aerial i have on the roof is for the telephone.
but i do need some bits
h/lamp driver side pre facelift 2000
also the pump for h/lamp washer and the plastic holder it sits in
and the silver dash bits some clips that hold the dash in place please .
but i do need some bits
h/lamp driver side pre facelift 2000
also the pump for h/lamp washer and the plastic holder it sits in
and the silver dash bits some clips that hold the dash in place please .

Can do those no problem. Now the "plastic holder it sits in" - not too sure on this one. Want to get me a pic or something?
another Sport on it's way in...
Hartge converted Sport just in.
Hartge engine just sold.
We've got another good M20B25 engine in, a facelift model one, running perfectly, only removed for a V8 conversion we have assisted with. £400 + shipping.
- sidewalksurfer
- E30 Zone Newbie

- Posts: 12
- Joined: Sun Oct 26, 2014 11:00 pm
Hi, Im after the full injection system from a E30 318i m10 for a conversion if you have these parts how much would i be looking for posted to London? cheers, Dan.
Hi Dan,
Complete kit is £200 inc delivery if I have one left. Thanks.
Complete kit is £200 inc delivery if I have one left. Thanks.
- sidewalksurfer
- E30 Zone Newbie

- Posts: 12
- Joined: Sun Oct 26, 2014 11:00 pm
Ok so I have just found out I need the following parts
From a 1984-85 BMW 318i:
Intake manifold w/ cold start sensor
Throttle body with throttle switch
Water inlet with sensors
Fuel injection rail with injectors and fuel pressure regulator
Complete engine harness with relays and ECU (make sure that the harness and ECU are from the same vehicle since they changed from 84 to early 85 and again in late 85)
Air flow meter
Main Fuel pump
Throttle connector for cable
As many hoses as you can get and don’t forget the hose clamps!
Intake air boot
Would the £200 cover these
From a 1984-85 BMW 318i:
Intake manifold w/ cold start sensor
Throttle body with throttle switch
Water inlet with sensors
Fuel injection rail with injectors and fuel pressure regulator
Complete engine harness with relays and ECU (make sure that the harness and ECU are from the same vehicle since they changed from 84 to early 85 and again in late 85)
Air flow meter
Main Fuel pump
Throttle connector for cable
As many hoses as you can get and don’t forget the hose clamps!
Intake air boot
Would the £200 cover these
- sidewalksurfer
- E30 Zone Newbie

- Posts: 12
- Joined: Sun Oct 26, 2014 11:00 pm
Just picked up a complete car as it seemed the easier option.sidewalksurfer wrote:Ok so I have just found out I need the following parts
From a 1984-85 BMW 318i:
Intake manifold w/ cold start sensor
Throttle body with throttle switch
Water inlet with sensors
Fuel injection rail with injectors and fuel pressure regulator
Complete engine harness with relays and ECU (make sure that the harness and ECU are from the same vehicle since they changed from 84 to early 85 and again in late 85)
Air flow meter
Main Fuel pump
Throttle connector for cable
As many hoses as you can get and don’t forget the hose clamps!
Intake air boot
Would the £200 cover these
Yes, open 3,64 available.Z2K wrote:Hi,
Any 3.64, 3.46 med case diffs in stock? Open or LSD, not fussed!
Thanks!
Hello,
Would you be willing to send a few e30 parts over to Portugal?
I need a few generic parts specifically for RHD cars, such as:
- radio surround trim;
- the dashboard cover, between the steering column and the clocks;
- glovebox supports, the two that hold it when open, and the rear one too;
- drivers side door lock;
- And a few more bits that i think you might have, with all those cars!!
Thanks in advance!
Would you be willing to send a few e30 parts over to Portugal?
I need a few generic parts specifically for RHD cars, such as:
- radio surround trim;
- the dashboard cover, between the steering column and the clocks;
- glovebox supports, the two that hold it when open, and the rear one too;
- drivers side door lock;
- And a few more bits that i think you might have, with all those cars!!
Thanks in advance!


[/img]