M42 Camshaft sprocket torque setting
Posted: Tue May 22, 2012 2:14 pm
As above please chaps 
E30 Zone
The Largest Online E30 Community
https://www.e30zone.net/forum/
M42 Camshaft sprocket torque setting
Page 1 of 1
Posted: Tue May 22, 2012 5:35 pm
Bump
Posted: Tue May 22, 2012 8:51 pm
Come on people don't let me down!!
Re:
Posted: Tue May 22, 2012 10:05 pm
I'll check on the autodata system in my mates work tomorrow and see if it has it while I'm waiting to get the car prepped to fail MOT 
Posted: Tue May 22, 2012 10:28 pm
Thanks mate , It'll pass
, It'll passRe:
Posted: Tue May 22, 2012 10:39 pm
lol I doubt it, changed the front struts to a set of 51mm ones off an Alpina, never got round to checking the bearings, rumble like the thunder!
brake wear check light has come on too, although I think that's because I chopped the rear cable and forgot to rejoin the loop, tomorrow morning is tinker time:)
brake wear check light has come on too, although I think that's because I chopped the rear cable and forgot to rejoin the loop, tomorrow morning is tinker time:)
Re:
Posted: Tue May 22, 2012 10:51 pm
http://www.bmw-m.net/TechData/torq/bmw_torq.pdf
Seems to have everything...
Page 31:
M7 - 15Nm
8 * M7x20 bolts for the sprocket?
Seems to have everything...
Page 31:
M7 - 15Nm
8 * M7x20 bolts for the sprocket?
Posted: Tue May 22, 2012 11:21 pm
Thanks mate, very helpful
Re:
Posted: Tue May 22, 2012 11:50 pm
Handy pdf that, filed in my all things BMW related folder 
Re:
Posted: Thu May 24, 2012 8:57 am
Use a dab of thread lock as well.
Re:
Posted: Thu May 31, 2012 10:01 pm
DoneAndyboy wrote:Use a dab of thread lock as well.