E30 Zone

Okay.... Prepare yourselves.....

The countdown has begun!! 2 weeks till fit day.

1) I will be running m52 block and m52 gearbox. The wiki seems to think i'll need an M20 gearbox crossmember. I can see this being true but ive hunted ebay high and low so before i start begging for one i thought i'd double check....

2) Clio Master cylinders. I know i need the big metal black circle bit that does the squishy, but can i rob my little paint stripper reservoir from my e30 318i AUTO or do i need a clio one too? and obviously a non abs one or does it not care?

Asking stupid questions since 92.
Dan

Standard cross member as your gearbox angle will match you engine angle.

I got non abs e30 master cylinder on my Clio, works great!

Only two versions of E30 gearbox crossmembers - auto or manual. As said above, you gearbox is level, so a standard manual one will fit. If you use a gearbox that sits at an angle, you will need to use a modified manual crossmember.
Servo and master cylinder are two different items. You need a Clio servo, used with an E30 master cylinder. M/C can be ABS or non ABS, but an ABS one may need a tee piece to split the lines to the front hubs.

Thanks guys!!!

Ill make a build thread when I get all the pictures together and launch it up somewhere when its done!

Time to go hunt me a manual Crossmember out!

Just got to make sure my shopping list is absolutely all ticked off before i start stripping the M40 out and render it useless for a while!