E30 Zone

Posted: **Tue Oct 14, 2014 5:24 pm**

Okay so i've bought a new MAF and inlet elbow, everything fits but there's no 2nd hole in the elbow for it to go to the cam cover.

The wikizone says i need an e34 525i elbow? Will this elbow fit the standard MAF correctly or do i need the corresponding MAF from an e34 too.

Thanks

Posted: **Tue Oct 14, 2014 5:29 pm**

So this basically:

http://www.ebay.co.uk/itm/Air-Filter-In ... 4870e26ad7

Posted: **Tue Oct 14, 2014 7:54 pm**

M52 engines have one hole in the intake elbow.
M50 engines have two holes in the intake elbow.

An M50 will fit your MAF fine.

Posted: **Tue Oct 14, 2014 7:57 pm**

Or you can use one of these in the appropriate size

http://www.autosiliconehoses.com/silico ... iners.html

Posted: **Tue Oct 14, 2014 9:16 pm**

Thanks Both

E30 Zone

Intake elbow and MAF with M50 Manifold

Intake elbow and MAF with M50 Manifold

Re: Intake elbow and MAF with M50 Manifold

Re: Intake elbow and MAF with M50 Manifold

Re: Intake elbow and MAF with M50 Manifold

Re: Intake elbow and MAF with M50 Manifold