Page 1 of 1
20mm spacer clio servo- M52 conversion
Posted: Tue Aug 19, 2014 12:12 pm
by daisy123
Has anyone made this and got any pics please? Just would like a pic to go by for when I machine it up.
cheers
Re: 20mm spacer clio servo- M52 conversion
Posted: Tue Aug 19, 2014 1:16 pm
by ross_jsy
I found a rod a mm or so smaller than the bore on the mc and cut it to length
Re: 20mm spacer clio servo- M52 conversion
Posted: Tue Aug 19, 2014 1:21 pm
by craigieeb
Not all have to be 20mm,
I'm not using any,
you could start with a 20 then try the brakes, if they stick, just make it smaller and smaller
till you find your sweet spot.
Re: 20mm spacer clio servo- M52 conversion
Posted: Tue Aug 19, 2014 1:33 pm
by ross_jsy
That's what I had to do. 20mm seemed fine but once I had driven the car the brakes started binding so had to take more off
Re: 20mm spacer clio servo- M52 conversion
Posted: Tue Aug 19, 2014 2:09 pm
by daisy123
okay gotcha. cheers guys, thats pointed me in the right direction!