E30 Zone

Wiring up my electric fan loom from Danthe, have hooked up to fuse 3 & relay K1 but not too sure where to connect the 3rd wire (black/brown), think it should connect to a green/black wire in my fuse box, but only colour of wire that's green/black is into fuse 19!!
Anybody out there that can point me in the right direction?

I'm not sure on the wire colours, but from memory, power to the temp switch comes from fuse 19.

I've got 2 black/green wires into fuse 19.
1 wire comes from inside the car & the other has a connector on the end with a black/white wire.
Any idea what 1 I connect up to?

I would have emailed you instructions for this mate

Dans the man to help with one of his looms

But here's how I wired my fan in...
http://www.e30zone.net/e30zonewiki/inde ... n#Fuse_Box

i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up

magpie wrote:i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up

You would try and chop your leg off if you were left alone for 5 minutes

craigieeb wrote:

magpie wrote:i got a pdf file on how to fit the loom when i got mine from Dan.....even i managed not to fook it up

You would try and chop your leg off if you were left alone for 5 minutes

bet your laid up on the settee, getting your lass to do everything, poor mick