Page 1 of 1
Wiring Issue
Posted: Sun Mar 02, 2014 7:58 pm
by ben-yatess
I havent tried to start the engine yet however there may be a problem because on the wiring guide i have it says, pin 17 from e30 to pin 18 e34 which is voltage whilst starting, however there is no wire on my e30 for pin 17 so do i need to supply this pin with power? i have no abs so could use pin 20?
Re: Wiring Issue
Posted: Sun Mar 02, 2014 8:33 pm
by Brianmoooore
Pin 18 on the E30 loom, not 17 to pin 18 on the M50 loom. Black/yellow wire, and if your car has ever started, I'm sure it's there.
Re: Wiring Issue
Posted: Mon Mar 03, 2014 7:28 am
by ben-yatess
Brianmoooore wrote:Pin 18 on the E30 loom, not 17 to pin 18 on the M50 loom. Black/yellow wire, and if your car has ever started, I'm sure it's there.
Just rechecked the diagram armed with your info, it appears there is a typo on it, i have also looked at several other diagrams which also said 18 goes to 18, cheers for the help