Page 1 of 1
m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 12:01 am
by JF008
Hi, my non vanos m50b25 goes tic tic tic, the sound is in tune with the revs and seem to come from the driver side. Its sadly reminds me of my previous m40 engine's tappets! I searched the web and found that it could be the valves or the chain tensioner? oil level is good.
Any advice would be much appreciated!
Thanks
JF
Re: m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 8:09 am
by AndyZippy
Sounds like it could maybe also be exhaust manifold (likely gasket, or a loose nut/stud)?
Re: m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 9:18 am
by Motorhole
Could be batch firing injectors due to failed cam sensor too.
True using a long screwdriver as a stethoscope to source the noise before spending any cash!
Re: m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 9:26 am
by DanThe
As said could be an exhaust leak on the manifold, near the head.
Could also be a loose sparkplug depending on how many limp wristed mechanics have been working on the engine

Re: m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 11:45 am
by JF008
Would a failed cam sensor show on the diagnostic machine? could it explain why I have fluctuating revs on cold start ?
Re: m50 that goes tic tic tic
Posted: Thu Jan 09, 2014 11:46 am
by JF008
Thanks for the replies too!
Re: m50 that goes tic tic tic
Posted: Sat Jan 11, 2014 9:36 am
by JF008
The cold start issue disappear when unplugging the MAF. The car was remapped few days ago hoping it will solve the cold start fluctuating rev problem, it gained in power but made the problem somewhat worse. I hope all those issues are linked and will be resolved all at once. The car is at the garage for investigation although any input always welcome : )
Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 7:27 pm
by JF008
New cam sensor, same problem... I've just bought a new/used AFM (to solve the cold start issue) I hope that is it!!!!
Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 7:42 pm
by AndyZippy
Have you checked your 'zaust manifold??
Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 9:31 pm
by JF008
Yeah its all nice and tight unfortunately!
Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 9:48 pm
by DanThe
What exhaust manifold is it? Any pics?
Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 10:23 pm
by JF008
Its a fritz bits one

Re: m50 that goes tic tic tic
Posted: Tue Jan 14, 2014 10:49 pm
by DanThe
Proper job then. Id be surprised if it was a manifold leak but it has been known for craftsmen to leave a slight gap in welds
Are the plugs tight?
Re: m50 that goes tic tic tic
Posted: Sat Jan 18, 2014 4:08 pm
by JF008
I checked the plugs, all good there. Also installed the right Bosch AFM and it cured the cold start issue
Now I have to investigate the ticking further as in this thread:
http://www.e30zone.net/modules.php?name ... c&t=242399
It definitely comes from the top of the engine.
Re: m50 that goes tic tic tic
Posted: Fri Jan 31, 2014 11:33 am
by jellybellydrft
sticky lifters?