Page 1 of 1
speed sensor now sorted
Posted: Mon Dec 31, 2012 2:18 pm
by jimmymig
hi all got a m52 in my e30 but my car has no speed sensor wiring! will it have to be remapped or is there another option?thanks jim
Re: speed sensor
Posted: Mon Dec 31, 2012 2:53 pm
by DanThe
All you need is a diff sensor and a set of E30 clocks, dont you have this?
Re: speed sensor
Posted: Tue Jan 01, 2013 5:03 pm
by jimmymig
yes got both but no wire in plug on the e30 harness cant remember the pin number

Re: speed sensor
Posted: Sat Jan 12, 2013 8:22 pm
by rich318i
pin 9 e30 to pin 20 e36. i did the same thing, all the wiring had been cut back and looking nice and didnt want to start looking for the pin20 wire so i just took it from pin 9 to pin 15 on the ECU.
Re: speed sensor
Posted: Mon Jan 14, 2013 2:11 am
by jimmymig
thanks rich will give that ago when I finish fitting poly bushes

Re: speed sensor
Posted: Sun Apr 28, 2013 2:49 pm
by jimmymig
Finally got round to looking at my wiring pin 9 to pin 20 was done it is pin 14 i am missing on e36 side! Can i run a wire straight to the ecu from pin 14 e30 plug and if so anybody know pin number on ecu that needs conecting? Thanks jim
Re: speed sensor
Posted: Wed May 01, 2013 3:13 pm
by jimmymig
sorted

connected pin 14 on e30 side to pin 9 on e36 side full revs and a happy me